How to cut 12 mm thick glass
Hello friends, in this video I will show the very simple technique of cutting thick 12mm glass using toyo cutter. By this method any one can easily cut thick /thin glasses and mirrors at home.which can be used to create various craft items and aquariums also.in many videos on youtube are using sparkplugs, files,scissors etc for glass cutting purpose but they are not appropriate tools for glass cutting which might result in breakage of glass of even an injury to your body.so please watch my video and follow the instruction and by some practice any one can master the art of cutting glass. I have also demonstrated the method of drilling hole in 12mm glass which you can see by going through link below.
Thankyou.
How to drill hole in 12mm glass
• how to drill hole in g...
Пікірлер: 305
I spend 39 yrs in glass industry in Dubai ....we had glass cutter from mp India, Mr nooral he was uneducated, but never seen glass cutter like him, who can beat intermac waterjet machine whc can cut any shape or thikness, he use to say bhai sahab Mai glass kattata nahi khata hu,. Means i don't cut glass i eat glass, seen him cutting any thickness....any shape like child plays with scissors cut paper.....great born talent
@jugaadtechnology449
2 жыл бұрын
Hats off to Mr Nooral...
@holvireak-77788
2 жыл бұрын
Hello, I am also a glass cutter, you can all access my mail in my Channel.
@alfredosantiaguel5784
2 жыл бұрын
That's not the good way to cut thick glass.Im a glass cutter for 36 yrs .
@headlinesgenerator5426
2 жыл бұрын
Uneducated? Really!
@think_green
2 жыл бұрын
@@alfredosantiaguel5784 please teach me. I want to learn thick glass cutting Sir. Thanks in advance. 💐😇
One of the things novices do when cutting glass is using too much pressure with the cutting tool. You know when you have done it right by the sound. It should be a light hiss and the score is a fine line , almost hard to see. Too much pressure and the sound is crunchy with score looking like a deep scratch. The deep scratch are tiny fractures running radially from the line and at best will result in a rough cut and at the worst not cutting at all or running everywhere but where you wanted the cut. Also make sure you have cleaned the glass first and the cutter is not nicked and/or dirty. My humble experience.
@ladyfame1430
16 күн бұрын
Thank you for the information.
I have no idea how I got here but this was so cool to watch, clearly a craftsman at work
Thank you, I was able to cut to size a thick mirror following your technique using the hammer. A bit unerbing but it worked!! Great simple way of cutting very thick glass with simple tools, down to earth. I really like that, just using your hands, even wearing sandals 😊 Some people get over killed with so much gear and tools. From all the videos I watched, this was the most helpful. Thsnk you
I always say. " you can't control glass but you can tame it." I love my occupation and it seems as if you do too.
Thanks. Sounds like Planning and Patience are key.
Thank you for the demo!!
Been cutting glass for 42 years now and thicknesses up to 19mm by hand and only time I used a tapper was to start the scores of 10 and 12mm circles. Never on straight lines.
@OuyaYouyo
6 ай бұрын
Que usabas entonces en línea recta?
jugaad technology: Thank you for this video. I see now that it is important to develop a "feel" for how hard to tap. This technique allows people to cut glass with simple tools and a little patience and perseverance. Thanks again for sharing your high level ninja glass cutting knowledge. 😊
Техникээ хуваалцсанд баярлалаа.
Jeez weez, I would not even attempt it. Thank you for your expertise, and for sharing it with us.
thanks much for your experience leaning something here for you sir_ as a glass man
Brilliant. Thank you so much for sharing.
Hadir nyimak boss ku suksesselalu 👍👍👍
I like your cool hand-made hammer!
awesome idea it so effective.
Thank you for sharing your technique. 🙏🏾
1. use more big table to cut 2.after the first hit by hammer you use that pen under the cuting line 3.push down the glass ......then the cuting line more smooth than this
@holvireak-77788
2 жыл бұрын
Hello, I am also a glass cutter, you can all access my mail in my Channel.
@holvireak-77788
2 жыл бұрын
Hello, I am also a glass cutter, you can all access my mail in my Channel.
Wow that awesome I'm amazed nice n cool jugaad thx for sharing. 😍🌷
@givaldosilva4381
2 жыл бұрын
Que marca e modelo de cortador vc usa nesse vídeo ?
Well done!
Good work
I have a project I'm doing to replace my patio glass. I was curious what should I do to make a center circle cut for my umbrella?
What an incredible skill
Wonderful. Like 👍.
Thanks for the tip
@holvireak-77788
2 жыл бұрын
Hello, I am also a glass cutter, you can all access my mail in my Channel.
Amazing!!
Beautiful
holy crap cutting glass in sandals friggin crazy
Just Use a brush to apply the oil on the glass before you cut it with the glass cutter and then place the sodden back part of the brush under the glass on the end of the cut and snap it pushing down.
Your are a great crack, thanks so much.
I tried this method several times on a Shower Glass 3/8” but the Glass won’t break !!! Any advice ( I have 72” L that I have to cut it to 48” ). Thank you in advance!!!
Nice ❤
Thanks so much! Can I use any other type of oil before the cut?
thanks alot...
Giive him a applause......
Thank you
Excellent 👍
@jugaadtechnology449
3 жыл бұрын
Thank you
@harshgaming7097
2 жыл бұрын
kzread.info/dash/bejne/dmSZ0rx8Y9Xels4.html see my video of glass cutting
Nice
Gracias
*_Keren Sekali_*
I need to do this to a 10mm table top. How do I smooth the edge and make it look neat once the glass is cut ?? Thanks great video 👍🏻
@jugaadtechnology449
Жыл бұрын
By using belt sanding machine u can make the edges smooth.
Semmaaa
@holvireak-77788
2 жыл бұрын
Hello, I am also a glass cutter, you can all access my mail in my Channel.
Mantap bos
Will teak oil work for cutting fluid?
Fine sir
Does your technique work for cutting tempered glass? Thank you for sharing your experience.
@DerDanachDenkende
3 ай бұрын
No, tempered glass cannot be cut without annealing it again.
Puedes usar un pincel o un vaso he introducir el toyo. asi se lubrica mejor.
I was trying to same glass in small pieces but failed. I will trying your technique. Thanks for sharing
keran bos ku 🙏🙏 salam kenal bos
could you cut both sides ?? would that be better ?
@jugaadtechnology449
6 ай бұрын
Cut at one side is better
Awesome
Learned something today 🙏
@holvireak-77788
2 жыл бұрын
Hello, I am also a glass cutter, you can all access my mail in my Channel.
many technic learned from this glass cuttng shows
Mashallah
👍👍👍
How can I buy a cutting blaide, and average price.
If you scratch both sides of the glass with cutter it will become very easy
That"s a nice clean cut, excellent.
glass per miti lagaker cut kite hai yards kuchen aur?
Good job.....
@holvireak-77788
2 жыл бұрын
Hello, I am also a glass cutter, you can all access my mail in my Channel.
👍
next, teach me how to make hole on the glass. thanks 😊
@jugaadtechnology449
Жыл бұрын
Please check my other video for drilling hole in glass...
Bhai itte der me customer chale gaye ho gye hm 😂😂😂😇
Aurino
Hallo etnha time kathna ma lagha ga to farha to banha gya karegarh
Pa comme ça
Very good👍
Wow
Hi. Can I use sandpaper to smooth the edges?
@jugaadtechnology449
Жыл бұрын
It is better to use emery stone when u try to smooth edges manually.
certo che se in una officina per tagliare 60 centimetri di vetro ci mettessero 15 minuti ... sarebbe tutto piu ... molto caro ahahahahahah
🙄👍
Sir apne kach per line khichte samay kon si liquid dala h batao
@jugaadtechnology449
2 жыл бұрын
Kerosene oil
😃😃😃😃
That would be risky when tapping a large piece which would fall because of its weight. A support would be needed on both sides of the glass, and a ball pen hammer would have been better because of the round head as it would give softer taps, thinner glass can just be snapped after one tap to run the line, Thank You
@christianscustoms6429
2 жыл бұрын
Why watch a video if you already know everything?
@chocomoco1627
Жыл бұрын
@@christianscustoms6429 That's what we call a dumb question ! Jignesh Tailor's advises are important . You just earned a dislike .
@waterboy8999
Жыл бұрын
Turn it over.
@northeastcorals
Жыл бұрын
IF it was a large piece, but it wasn't. The fact that the guy's made his own hammer from re-bar says to me maybe he doesn't simply have access to a plethora of tools so he makes do (& well) with what he has.
For me safety first use glove, I'm not use ruler straight to the point is using meter. and glass cuter Only,,, it's very fast,,
You must be paid by the hour.
I never knew this
عمليه معقدة قديمه . فيه ادوات اكثر فاعليه واقل تعب
That's amazing, I just scored a 1/4" piece of glass that won't break, I tried tapping it with the ball on the end of the cutter, I guess I need something heavier to tap it with?
Where to order?
De hamer is te breed, gebruik een puntige hamer
👍👍👍👍👍😯😯😯 🤔🤔
What if a glass break?
19 mm ka glass kaatne mein itna time nahin lagta hai
This is also a method of cutting thick glasses ....nothing wrong in it . All methods are almost same only diffrence is how you apply force after scratching the glass .👍👌
Hadir
May I ask you: If the glass was thinner ( about 2; 3; 4 mm...) , before it broke , we need to knock its face under the glass like you or do we bend it straight down? Thanks for your sharing on how to cut thick glass very good.
@erikmskima7545
2 жыл бұрын
Knock the glass only if you absolutely have to... His technique is not that great... Knocking the glass can make the edge very uneven... Your welcome..
Kelamaan..........
lama.....belajar lagi,,,,
pueden ponerlo en el piso y colocar un clavo en la linea de corte y hacer presión en ambos lados con los pies.. y zuazzzzz
Coacley
Kab sikha kam aur kahan se bilkul ajnabi Ho Bosss
What is the glue (gum) are you use ,reply me
@jugaadtechnology449
9 ай бұрын
Its not glue it is kerosene oil, as I mentioned
@AvishkaGamage-dx9vv
9 ай бұрын
@@jugaadtechnology449 thanks ,koheda tiyenne
Come here in tubod glass... We will show you how to cut 12mm thickness of glass.. That is so basic...
Berapa kilogram tekananya?
Dharmendra love
Aap ye bhi likhe ki sirf glass wale expert hi ka te warna hath me lag sakta he bhai
jab glass cutting kar na nhi ata to kyu kar raha hai
Good
@jugaadtechnology449
3 жыл бұрын
Thank you bhai
19 mm katne me kitna time lagege