Thank you for taking your time. I learned a lot from your video. You didn't ramble about nothing. You were very helpful. Thanks again. 😊😊😊😊

I must say this is the most relaxing and understandable video I have watched thanks a million and you didn’t go on and on about NOTHING

@TheColoredUmbrella

Жыл бұрын

Glad it was helpful! This is so nice of you to say and totally made my day!

@sabrinawicker8474

Жыл бұрын

You’re more than welcome you made mines too when I was able to follow your EASY instructions 💙I would love more

Just followed your instructions and my wrap came out perfect! I have watched so many other videos and yours by far is the BEST!! Thank you, Thank you, THANK YOU!!! XOXOX

@TheColoredUmbrella

Жыл бұрын

I'm so glad! I love hearing that!!!

You have put me in a good place with my new journey sublimating tumblers. Thank you so much for the details. They matter!

@TheColoredUmbrella

Жыл бұрын

Oh my gosh thank you so much! You are sweet and I am so happy that this helped! If you ever need help with anything just let me know!

Your voice is so pleasant. I look forward to viewing all your videos

This is the best explanation video I have come across!! Thank you so much!!!

Great job explaining!

Thank you so much! Now I get a perfect wrap for my tumbler ❤

@TheColoredUmbrella

Жыл бұрын

Wonderful! This makes my day!

Loveee this video !

Great video

Thank you. I now realize I was doing a little over taping..😳

I never knew I needed to get Silhouette Studio Design to do the 20 oz tumblers....LOL I didn't know it was a free version I purchased it🙃

Can I use a Epson EcoTank ET-2800? And just put sublimation ink in it?

Love your video, very helpful, where can I find the instructions

hello so I followed your exact steps!! it helped a Lot thank you.. but I had some dots like rusty feel on the tumbler maybe would it be because I didn't use butcher paper ? or what would it be

Hello, Do you happen to know what the dimensions would be for a 30oz skinny? thank you for your time.

i seem to keep having the issues with taping. Always seems that i get that white blotchy top and bottom of the tumbler then also almost a ghosting of tape marks. I just don't understand since the tape is on the outside, not directly on the tumbler. It comes through the print. What am I doing wrong ? So frustrated.

Blessings with my epson 2800 series is there a way to print without photos getting cut off

Hi I don't have the borderless options, what do I do?

When i go to file to print page setup and the menu drops down it gives me an option for rear feeder or rear feeder borderless. It doesnt show my printer. I guess the printer has to be on since its echotank wifi connected ? My apologies for such a question but ive been trying to figure this all out for to long now lol

@makaylaslmtmommy

Жыл бұрын

I also use an Epson printer et2400, my options are also different and don't show the us letter borderless option. Only allows 8.5x11

Sooo you printed sublimation paper from the sillouette or a regular printer?

@TheColoredUmbrella

2 жыл бұрын

Great question! And I am sooooooo sorry I am just seeing this now for some reason 😭 I print from the silhouette studio program on my sublimation printer on sublimation paper! I have a converted Epson ecotank 15000 and love it!!

My comes upto short about 1/16 to sort what do I do

Hi I followed your instructions but the wrap ends up being long and not wide enough. My tumbler’s are the 20oz skinny. Can you please help

If it overlaps will it show up when sublimated?

@TheColoredUmbrella

Жыл бұрын

Hi!! I am soooooo sorry I am just getting back to you! It was the holiday and then I got super sick so I wasn't able to work at all and am getting caught up! If there is an overlap then you most likely will get some ghosting where the images overlap. If you have a tiny bit of overlap (like barely overlapping) that is totally fine. I would but off any excess overlap though so make sure you have a nice clean image. Hope this helps! Let me know if you have anymore question! Thanks!

Would eco solvent ink work instead of sublimation ink?

@TheColoredUmbrella

Жыл бұрын

No you would need to use sublimation ink for tumblers

I have a convection oven how long and what heat setting should i use?

@TheColoredUmbrella

Жыл бұрын

Hi!! I am soooooo sorry I am just getting back to you! It was the holiday and then I got super sick so I wasn't able to work at all! For a convection oven you will do 375 for 5-7 minutes! Let me know if you have any questions!

Do I have to mirror image if it’s already set on my printer?

@TheColoredUmbrella

Жыл бұрын

Hi! Great question! Nope! No need to mirror the image if your printer is set to do that for you!

I have the same press. So you do not use the timer on the press?

@TheColoredUmbrella

Жыл бұрын

I love this press! I always use the timer!

I don’t get the option to select boderless I have printed one wrap that came out the right size but I’m not able to print another one. Can you help me with this?

@TheColoredUmbrella

2 жыл бұрын

Oh my gosh! I am sooo sorry!! For some reason I was never notified of comments and I feel so bad!!!! This is a great question!! So I tested it out with doing borderless and non borderless and the borderless always comes out perfect for me! I would recommend printing out an 8x10 box using borderless and non borderless and measure then to see if there is a difference. You will always know what size your printer truly prints on so you can adjust your measurements. Mine is about .2 inches off so I adjust my size that much everytime. Hopefully this makes sense!! Let me know if you need more help!!

@sherrysodergren1740

2 жыл бұрын

@@TheColoredUmbrella thank you so much for replying. I think I finally got it figured out. I love your channel and have learned a lot. I appreciate that you are willing to share your knowledge with others.

My shilloette studio won't let me choose nome for machine and it doesn't give me options for printer anywhere

@TheColoredUmbrella

5 ай бұрын

Hi! I am so sorry! I somehow missed a bunch of comments! 🤦‍♀️ you should be able to access the printer options from “file” in the top menu. I have a video showing how to print from silhouette.

I use windows and my page setup doesn't allow to choose borerless. Any idea on what I can do?

@shatierrasmith

Жыл бұрын

Same.

@tonyaryan6371

9 ай бұрын

Me too.

my tumbler measures 9.3 wide X 7.125 high everything i have tried either cuts the image off or is too long but never wide enough.. can you help me

@TheColoredUmbrella

Жыл бұрын

Hi!! I am soooooo sorry I am just getting back to you! It was the holiday and then I got super sick so I wasn't able to work at all. Are you still having issues?

How did you get your image or where did you get your image from

@TheColoredUmbrella

2 жыл бұрын

Hi! Ok I feel so bad! For some reason I didn’t get notified of comments and missed some! I’m so so sorry!! I actually designed this wrap! I have it available in my digital shop on Etsy! Link is in the description!

How do I get a copy of the step by step instructions

@TheColoredUmbrella

Жыл бұрын

Hi! I am so sorry I am just seeing this! I have them on my website and here is the link! www.thecoloredumbrella.com/post/how-to-create-a-sublimation-wrap-for-a-20oz-skinny-in-silhouette

Mine still doesn’t work. Idk what i am doing wrong. Does the paper have to be glossyor something?

@TheColoredUmbrella

Жыл бұрын

Oh no! What is the problem?

Where do you design your image.

@TheColoredUmbrella

5 ай бұрын

Hi! I am so sorry! I somehow missed a bunch of comments! 🤦‍♀️ I do all of my designing in Procreate, Canva or in Silhouette Studio

Do you have a tutorial to add a name to the tumbler with sublimation

@michellegillie4817

2 жыл бұрын

Go over to the A and click on it then click on your image to put text in

@TheColoredUmbrella

Жыл бұрын

Hi! Oh my goodness I am so sorry I am just seeing this!! And yes you can just add a text box and type the name! Just make sure you mirror the name as well for sublimation!

@amberspiker-marston1750

Жыл бұрын

Is this for Hogg Tumbler settings or just a 20oz skinny in general? Thanks 😊

@amberspiker-marston1750

Жыл бұрын

Sorry I researched an saw the bottom! 😂

@debbiejones5174

Жыл бұрын

I finally was able to get the printer added (Sawgrass) but can’t find borderless print for the paper size. I know you said that was super important. I am on a MacBook Pro. Any advice.

Can you send me copy of the actual instructions like you showed here please

@TheColoredUmbrella

Жыл бұрын

Hi! They are on my website under then blog and you can download it. I have the direct link in the description. Let me know if you have any questions! Thanks!!

What program is this?

@TheColoredUmbrella

Жыл бұрын

This is Silhouette Studio! It’s my favorite program to print from. I always get the best colors. It’s free to use and you don’t have to have a silhouette machine to use it

@mongmm.

Жыл бұрын

@@TheColoredUmbrella Nice! Does it give more space to print on your paper? Cricut limits the space.

@TheColoredUmbrella

Жыл бұрын

@@mongmm. Yes for sure!! So much better! You can print any sizes which is amazing!

I want the instructions

@TheColoredUmbrella

Жыл бұрын

Hi! They are on my website under then blog and you can download it. I have the direct link in the description. Let me know if you have any questions! Thanks!! REPLY