Hey! I can be casual here on the Extra channel so expect plenty of smaller videos on here :)

@GuardTower

4 жыл бұрын

The webcam i found isn't the same as what you were demonstrating. I think its a webcam with a mic integrated, is there a way for me to also use the mic?

@derekborigo8601

4 жыл бұрын

Hey Mat, love what you're doing! Keep it up!

@FernandaFoertter

4 жыл бұрын

Sweet! Love your channel. Also digging the beard :)

@Alex0474

4 жыл бұрын

@@GuardTower The microphone data should go through the USB connection as well

@fivetimesyo

4 жыл бұрын

I just want a third of your spirit, mate...

Congrats on launching the 2nd channel Matt, Good luck with it all!

The concept of this second channel to go more in depth on the tutorials is genius! Thank you so much for the great content, you have an amazing way of explaining things!

@jeeraw

2 жыл бұрын

D

@ghoztixxDoesStuff

Жыл бұрын

D

Watch out for webcam modules that are powered by 3.3V as they fry when connected to the 5V from a USB-port. Some have it marked on the rear of the PCB as 3V3 next to one of the wires. A little VRM to regulate the voltage to 3.3V is enough to get those working. No need to also convert the data signal.

@__init__3493

Жыл бұрын

thanks for this comment lol. almost broke a webcam that way. thankfully it was pretty resilient

@IbrahemAlbanawi

Жыл бұрын

@@__init__3493 a rookie to electronics do you know how can i do that 5v to 3.3v

@jvon3885

Жыл бұрын

@@IbrahemAlbanawi couldn't you just use a potentiometer? Just adjust it from 0v to 5v

@BetalerIkkeSkatt

Жыл бұрын

couldnt get this webcam to work and then i see the 3.3v on the pcb. I guess that explains it

@bittertruth6575

Жыл бұрын

wire 2 or 3 diodes in series to the positive terminal before you attach it to the camera. They will take up the extra 1.7 volts.

This channel will really be helpful for understanding more how you build certain DIY things 🤠

Thank you very much Matt. I enjoy watching many of your projects for entertainment but I actually came back for this one because I authentically needed it. It worked very well so far!

Thank-you, that was exactly what I wanted to know. No messing about, just, "Here's what you need and here's what to do". Most appreciated.

I love your tutorials! Your recycling of tech combined with your style is a win every time! With this vid I was able to hack a Brookstone Rover 2.0 camera to USB in under 15 minutes. Thank you!

Awesome project....can't wait to see all the extra content on this channel

Very happy there’s another channel with your content!

bro this guy is like the definition of big brain. it is so cool to see people bothering to make educational video to enjoy :) good on you

It works everybody! I tried this with my old zee pc and it worked nicely, planning to make them into cameras to us around the house. Thanks bro and keep up the awesome work!.

Two DIY perk videos in one day, 2020 is a good year after all

@XZasCC

4 жыл бұрын

DIY perks is my happy place where I can forget about the world haha

@santheo1231

3 жыл бұрын

Nope. No, its not.

@jacetroiz7877

3 жыл бұрын

Sir is it possible to cellphone camera to turn it into a spy camera using usb cable? Lots of tutorials i saw here in youtube and they said it was fake. Could you tell me sir? Is it possible or not? Thank you

@docredstone461

3 жыл бұрын

@@jacetroiz7877 a smartphone caméra ?

@Jdjbsikj

3 жыл бұрын

@@jacetroiz7877 you can do it with a iphone 5s camera search for "spy camera adi experiment lab" you will get the video

The real joy I felt when it worked on the first try! Thanks!

Really top notch "videography", "post editing" and image "quality". This isn't your dad's B-roll. Good Job. 1500 points awarded. Cheers

If you can't get it to work there may be an additional step that you need to take. Most webcams run at 3.3V but USB provides 5V. Some will be fine with this but others (like mine which was pulled from a Dell Inspiron) will shut themselves off as soon as you try to pull video from them. A quick and dirty way of stepping the voltage down is to stick two diodes in between between the 5V line of the USB cable and the power wire on the camera instead of soldering them directly together. The cathode end of the diodes (the stripe that's on the diode casing) should point towards the camera end. i.e: USB cable 5V Line ---> Diode (stripe this side) ---> Diode (stripe this side) ---> Power wire on the webcam. I used 1N4001 diodes since I had them for another project and are designed to carry up to 1A of current. If that doesn't make any sense, you can find a diagram by googling for "hackaday 110436". That will bring up a project that explains it further. Thanks for the great video!

@mrcolo.

3 жыл бұрын

Hi, @jonathanfox5 Are two 1n4007 diodes good too instead of zener ones? Will I risk to damage anything? thanks

@jonathanfox5

3 жыл бұрын

@@mrcolo. Yep, those should be good

@mrcolo.

3 жыл бұрын

@@jonathanfox5 perfect thx

This is actually a great tip, along with the other old laptop repurposing ones. I'll definitely try some things out with my old Lenovo I haven't been using for some years

Hey, Matt. First, thank you for making this channel where people like me can gather some knowledge on how to use electronic gadgets once they get old or of no use. Good luck with future videos... :)

one of the best DIY channel on YT. Good wokrs

2 x DIY Perks. 2 x the projects I promise myself I will try but procrastinate on at a professional level. Good luck with the 2nd channel Matt!!

Thank you very much for this tip. I have many scrap laptops so I stripped the camera out and wired it to a chopped up USB cable. Worked first time!! 😃

I never knew you had another channel! Subbed!

I would really like a video on how to make a lavalier mic from an old laptop in detail! Love your videos! Greetings from Chile.

@max5gb

4 жыл бұрын

En chile

@ivanguerra1260

4 жыл бұрын

Enchiladas !! MMMMMMM !!

This would be great for a car garage or possibly even as a super stealth dash cam! Love your videos!!

Hoping to learn wiring stuffs with USB , voltage regulators etc you do on your diy videos . Looking forward to more contents :)

@mstech-gamingandmore1827

4 жыл бұрын

more usb-c!!!

@FirstDagger

4 жыл бұрын

Remember to watch the USB-C conversion video on the main channel kzread.info/dash/bejne/iGGqqNaidLzPedo.html

@Usq7213

4 жыл бұрын

yea

@smoke4131

4 жыл бұрын

@@mstech-gamingandmore1827 that's pretty easy, do your research on the internet and you'll be knowing everything you need for your project

@mstech-gamingandmore1827

4 жыл бұрын

@@smoke4131 yes, but I find diy perks's videos fun :) I'm not really interested in converting my own usb-c. But it might be interesting nonetheless.

Thank You so much, Matt! I am fixing a non functioning microscope for a coworker. It is a VGA type, with a board that has a 5v power input. I can now determine if the camera is working with what you showed. If the VGA board is the culprit, I just make it USB! Thanks again. Subbed!

thanks my friend, second DIY using old notebook parts (first it was its screen, now this USB camera), it was indeed tricky to find positive source. it works really fine

Hello there. Just wanted to say thank you. I successfully managed to do this with your guidance and the video quality is great! Thanks again

Thanks Matt you're the man! I like your videos. Keep up the good work

Thanks for your hints, Matt. I just dared to remove the HD camara board out of an old ASUS, finding 7 pins at the connector and totally covered components. Identified GND cable (which was connected at pin 1), took twisted cables (going to 2 and 3) as D+ & D- and connected 4 to 5V. Still works fine.

This is AWESOME Matt, I wish I could subscribe a million times

Love your videos, and second source of them is a great idea.

Just found your channel, you just earned a subscriber mate.

Congratulations on your new channel dude/mate/fellow!

@DIYPerks2

4 жыл бұрын

Cheers!

@Jchamaon

4 жыл бұрын

@@DIYPerks2 The soothing voice and impressive sound quality make it very appealing to watch your videos as well. I don't know if you've been told this but i wish you further success and channel growth!

I dismantled a 10 yrs old Lenovo laptop and took out its camera, used some old USB cable and its actually worked REALLY GOOD! it was very funny to see the HP laptop recognizes the new Lenovo WebCam :) GREAT VIDEO! thanks alot :)

this absolutely works !! I now have a working usb webcam for my pc . Good tip .

I would love to see a guide like this but with laptop's speakers. Nice video

Good Luck mate you are my favorite You-tuber from long time ago wish you the best :)

I really appreciate your projects. Good Luck Matt!

Great video Matt! I think I am going to do this. I like your security system idea.

Tried this with a webcam that had 6 wires, identified the supply wires using the pins from an eeprom that was on the board, got the data wires from the 2 twisted wires, didn't worked, swapped the data wires, didn't worked again, got another broken laptop, this time the camera had 5 wires, identified everything again and soldered to an usb cable, worked on the first try. Thank You.

Watched the video, had no broken laptop lying around. Fast forward at least a year I think and I do have one- I am bored and remember the video. Made my own webcam within half an hour and my long ditance girlfriend is very thankful XD thanks mate definetly a video worth watching more then once!

Hi Matt, greetings from China. I've been following your channel since your sun blaster video and enjoyed your channel a lot! Here is something I would like to see from your new channel: over the years, I've used a lot of cellphones, from Symbian to IOS/Android, i haven't thrown away any of them. I think I'm not the only one. Now, how about make a video teaching us how the convert cameras, microphones or even capacitive displays from more recent phones into something useful? I believe that would make a interesting as well as a challenging video which can be interested by lots of people. Moreover, recycled parts is good for keep the enviroment, isn't it? Anyway, hope your new channel goes well and keep uploading the fun videos! Sincerely.

@ssathessa

3 жыл бұрын

Same thought. Reuse cell phones

@alarmingly_good

3 жыл бұрын

that is a good idea i have a lot of phones as well

In germany we call you Ehrenmann. Really big thanks, thats a cool thing to make, i am really happy how my 12 year old webcam looks, really nice quality :)

Love you DIY Perks !

Just made one for myself. This video was great. The laptop I took apart was so nice, in terms of repairabililty, everything was marked out like someone was gonna open it and have a look, very nice experience. Also the webcam had the pin-outs clearly labelled which made the job so much easier. I wish right to repair passes world wide and we can go to being able to repair all electronics ourselves. And enjoy doing it. Quality is pretty bad tho lmaooooo. I mean, it's from a 14 year old laptop so I didn't expect much. Video was very nice. Thx

Absolutely amazing advice

Yes, I have a feeling I'm gonna love this channel. Could you please explain the wiring of the preamp on the diy microphone from the old, dead laptops video? :D

You are good at what you do and I love to watch all your videos. I brag on you and tell people to watch and subscribe! One thing: you are all about frugality and inexpensive ways to accomplish fun projects and heat shrink tubing is inexpensive and easily obtained and used. That, is frugal. Electrician's tape is simply cheap, and after time is just a sticky mess! Keep up the good work! I look forward to the next installment!

I left a comment on your main channel, but i will post more or less the same thing here because it needs to be heard. I wanted to thank you again for making an extra effort recently for those of us who want to make some of your builds. Sometimes it can be hard to find information/ know how pertaining to the things you are showing us, but its videos like these that make it all possible. So thank you very much. (PS: It would sweet if you could make a follow up video for the DIY monitor video)

As it happens, I just made one of these today! One of the things I ran into is that my particular camera had a shielding and it would not work on an un-shielded cable, it showed up OK, but I just got a black screen, to get around that I found a cable with shielding and soldered the camera shielding to the cable shielding and it worked great! In my case the camera came out of a Lenovo G505 and the wires were very, very small, 30awg if I'm not mistaken, and while soldering them was difficult, it was definitely not impossible. To insulate the tiny connections, I decided to use New Skin liquid bandage, since I lacked any liquid electrical tape or any heat shrink in those tiny sizes, and it worked great! Thanks for sharing this!

@DanChaltiel

4 жыл бұрын

I may have the same problem as my salvaged cam is recognized but will reboot every second with a LED blink as it is asked to display its image. Any chance you could explain how you identify the camera shielding? (my cam has also an inbuilt mic so there are plenty of wires)

@Teklectic

4 жыл бұрын

@@DanChaltiel the shielding normally looks like a braided metal covering or a foil wrap around the wires. To test it, you should be able to just touch the shielding from the camera to the shielding in the cable and the camera should start working immediately, if the problem is the shielding. Restarting every second would normally be an indication that the data lines are reversed though, so definitely check your connections.

@DanChaltiel

4 жыл бұрын

@@Teklectic There seems to be no shielding on the webcam wires then (see electronics.stackexchange.com/a/497752/82476 for a picture). If I reverse my data lines, the camera is not even recognized. I will investigate further. Thanks a lot for your answer!

@Teklectic

4 жыл бұрын

@@DanChaltiel I don't see any shielding there either, but I'm confused by the diodes in series on the V+ line. Two 1N4007s in series should give you a 2 volt drop which would leave you with only 3 volts to run the camera, I don't think that would work since the USB standard calls for 5V, I would try with one or no diodes and see if that does it for you.

@TimSheehan

4 жыл бұрын

@@Teklectic I think some of these webcams run on 3.3V, the one I tried with actually had labelling on the PCB - SGND, GND, D+, D-, 3v3 - that being 3.3 Volts. Some googling indicated that some expect two diodes inline from the 5V to drop the voltage to 3.3. That said I can't get mine to work but I wasn't using a shielded cable

This is absolutely amazing video

I'm so happy I saved my old laptops for parts haha

Great video, very cool, I got one going to play around with (-: The camera that I had, from a hp probook 450 G3, had 9 wires going into a 10 pin plug, where the wires were all labeled on the back of the camera pcb. Turns out in order for it to work I needed to wire both the 3V and 5V pins.

Great tutorial, took me 10 mins to do! I love it!

Insta subbed my dude! great content!

Finally a helpful video

Awesome idea. Better then spending on webcams. We often use webcams. Looks portable and comfortable.

Done and done, thanks this worked great

Loving the new channel mate. Cool beard too, suits you!

I've been researching this as cameras are so hard to find, and I've compiled some tips: -- It seems like there's a strong convention for wiring: 4 wires carry USB connection for the camera, and 2 separate wires carry data for the microphone (not USB protocol). -- The 4 USB wires generally go to a motherboard connection labelled "camera" whereas the 2 microphone wires go to a different connection entirely so you probably won't get audio over USB. -- Audio is generally PDM digital audio or sometimes analog. The condenser mic gets power from the same power line as the camera. -- The camera is generally receiving 3.3V from the motherboard, so consider dropping your USB 5V supply with some diodes in series. -- Very high end devices like Apple MacBooks and Microsoft Surface computers are using a single PCIe lane for their camera modules, instead of USB. This will be less convenient to wire up to an external plug, but not impossible! -- The webcam controller chips used (which interface the physical camera sensor to a USB protocol) often have inputs for audio. These are sadly not used on most modules, and the pins are hidden under the chip so can't be accessed :( I would love to see someone hack this into working so we can have a full video+audio solution.

@mrcolo.

3 жыл бұрын

Are two 1n4007 diodes good too instead of zener ones? thanks

@benskidmore6523

3 жыл бұрын

@@mrcolo. I actually just used 1n400x diodes myself if I'm honest. I didn't get too clever, just wanted to knock the voltage down a bit!

@mrcolo.

3 жыл бұрын

@@benskidmore6523 ok perfect thx!

Really appreciate this little hack. Thanks a lot for turorial!

I just did one. Works perfectly! Thanks for the hint!

I am astonished! Please, could you make a video and talk about how you come up with your ideas, what skills you previously learned and how you got to being such an innovative and creative person. I myself want to have a workbench and general crafting room in my next flat, but am a little concerned that to achieve cool stuff like you did, it requires a lot more then just effort and time. ^^

I love everything in this chanel and always enjoy it.....keep it on

Just done that right now(Camera: Lenovo Integrated Webcam [R5U877]) - in my case I think I was lucky :) the cables were black (obvious choice) for ground purple (reddish color) for Vcc and I had twisted pair of green and bluish - that made it easy for me to connect green to green and bluish to white and Everything works - recognized right away and streaming. thanks Matt.

Very cool thanks! I need a webcam for my dev/ desktop and have a dead laptop I couldn't reycle yet or even drop off at goodwill so should be set. Great channels & videos.

Wow \! You rock ! Am an independent fitness captain & artist philosopher so this tech stuff am rather new to. Loved it.....will watch again.!

Most webcams are not 5V, but normal webcams have built-in regulators. But laptop webcams can get around not having a regulator to save space and cost, as the laptop motherboard will already have plenty of regulators with many different rails. You will mostly find 5v webcams only on very old laptops, the easier way is wiring a linear positive adjustable regulator, or even easier just put a couple diodes in series.

Took the Link and Subbed. I need a simple Camera On/Off indicator lamp rather than unplugging the USB when I don't want the camera in use without my knowledge.

Thanks a lot for this, Manged to upgrade my 3D printer with this method so i can remotely monitor prints. And all i needed was an old USB cable and Dead laptop i had lying around. Fun 10 min project after discovering my 3D printer Firmware supports Webcams.

Did this a couple years ago all by myself. Felt smart. Feel dumb now after seeing how it can be done. Well well... it still works. Edit: “data wires are twisted” twisted... I took the broken PC, put the wires back together and then measured the voltage in data 1 and 2 and just got lucky with connecting them.

Many laptop cameras require a 3.3V power, not a 5V available on USB, so you have to add a voltage regulator.

@josilvandofelipe7836

3 жыл бұрын

Yes ,the most is 3.3v

@lenards8993

3 жыл бұрын

Thanks for your Comment, my webcam works with 3.3V too. Unfortunatly, I already connected it to 5V, do you think it is still working?

@noreply370

3 жыл бұрын

On 2:33 he tell us to find a regulater. That think regulate to 3.3 V?

@TzOk

3 жыл бұрын

@@noreply370 Yes, but some modules will use 3,3V USB, and regulate internally to even lower voltage, or won't have a voltage regulator at all.

@01Hudesohn

3 жыл бұрын

I have connected two diodes in series with plus 5V. That works too

Hey, love the new channel! Would you do a similar video but on laptop mics rather than webcams?

@oliwier000b

3 жыл бұрын

Laptop microphones are in webcams.

Im looking forward to mtoe videos on this channel!

Excelente trabajo , con muy buenas imágenes y perfectamente explicado. Gracias!!

Thank you Matt, great video! i'm really digging the second channel and i hope you will post here more videos as this one. I have a question, modificate RCA cable is not that hard, but is there a way to make a RCA to HDMI cable? the HDMI layout is way complicated and i'm wondering if there's a way to cut and modificate HDMI cables. Also, can you make a video about DIY wireless charging connector? i mean threre are the cheap adaptors you can buy on ebay or so but they usually suck, so i wonder if there's a way to make a wireless charging option to phones that doesn't have a wireless charging option.

I have already done this.... and I found out that *some USB cables have red for (-) and black for (+).* As long as the cable is used with both plugs attached it's not a problem. But when using it for such a project, it may kill your stuff. So it's a good extra advise to check if the polarity is correct on the right colors. This can be done by plugging the cable to a working USB port and measure the 5V DC. If red is positive, cable is good to go.

Thanks for making this video. I've been wanting to add a camera to my telescope for quite some time now and have not been able to do so not knowing how to go about it. Now I don't have to strain my neck trying to look through the eyepiece of the telescope and am even able to take picture of our wonderful solar system. By the way! could you do a video on how to use cellphone cameras as they have the ability to zoom in on objects. That would be a great addition to an already great idea.

You're rocking that beard Matt.

Subbed immediately! Something similar with an old smartphone camera pls

@vgamesx1

4 жыл бұрын

If you really want to re-use a phone camera the best way to go about doing so is downloading an app, you generally can't do something like what's shown in this video, you would need to figure out what connector it uses for example it might have a BM10/14/20 FPC connector then solder those teeny tiny pins to a breakout board or something where you can more easily test/probe the pins and on top of that phone cameras don't use a typical usb interface, they're more directly connected to the SoC which means you would need to make your own interface using a microcontroller or Raspberry Pi or at least look for someone else's project as a guide at making one. Basically in short a few people may find it a fun project but it's not at all worth the effort when you can get good usb cameras or cameras that are natively compatible with boards like the Raspberry Pi for $20 or less.

@Rangersloco

4 жыл бұрын

me too

@AMalas

4 жыл бұрын

Smartphone cameras are pretty much the sensor only. How to read data off of it is a very closely guarded secret for each and every sensor. This means that the phone is the only thing which will be able to access the camera 😕

i tried it and it acualy worked and now i dont have to spend money on a webacm :) thanks for the tutorial

This solved my problem, thanks!!

Hello nice video. I can see that you are using very often electrical tapes to insulate the wires. While it is working fine, for long term it is better to use heat shrink tubes. They are cheap and will last long term much better ;)

Thank you! I'm glad you are separating content. I hope we will see more content you might have scrapped as boring otherwise.

Super Video, danke für diese Idee, werde ich auch mal ausprobieren!

your content is aweosme

Nice... I will try this week

This worked for me thank you very much.

Nice work🙌❤️

love the vids man

I tried this earlier... And it works 😅

Wow cool. Gonna try this

brilliant every where 😍😍

Hi Matt! Great work, as always! I would really love to see some ideas on re-/upcycling old tablets and their components, as I have a couple of them and I'm sure that cool stuff could be made from them - any ideas?

@TheTalonts

4 жыл бұрын

He has multiple of such videos on the main channel.

el mejor video explicativo de como montar esto. Gracias

Man, great videos !, I would like to ask, Is possible to adapt an old phone camera to a laptop ?, since this comes with better resolution.

I tried to get a camera module which is nearly impossible. Then finally got one, it was PK40000N300 BNC4VHTTD-310. the connections were so bizarre and my projects was a total fail! I am very sure I fried the circuit by connecting the wrong wire for trial and error. I guess it was the errors for most part. Your videos are always good Matt. I should have paid more attention to the modules you used. Importing these modules is a problem here in India(in my state actually)because of customs

good video, hoping to get a camera for my desktop pc

Thanks I actually made one without a voltage regulator :))))