How to connect aluminum and copper wires? WAGO Alu-Plus contact paste and WAGO 222 coupling

Ғылым және технология

See how to safely connect aluminum and copper conductors with each other with WAGO connectors using WAGO ALU-PLUS contact paste.
In the video, I show how to apply the paste using the WAGO 222 coupler
Guidelines from the WAGO website:
"ALU-PLUS CONTACT PASTE
Installation of aluminum cables to WAGO couplings
Under the conditions set out below, it is allowed to connect solid aluminum conductors to some spring clamp terminals.
WAGO installation couplings:
The fittings are equipped with PUSH WIRE® clamps (series 2273,773) or with CAGE CLAMP® clamps (series 222, 224).
Connectors up to 4 mm² and max. 4 mm² aluminum conductor cross-section.
The clamp will be properly filled with the special Alu-Plus contact paste (catalog number 249-130).
ATTENTION! It is not allowed to connect aluminum conductors by means of couplings with a lever from series 221.
WAGO Rail-Mount Terminal Blocks:
Fittings equipped with CAGE CLAMP® clamps
Connectors up to 4 mm² and max. 4 mm² aluminum conductor cross-section.
The clamp will be properly filled with the special Alu-Plus contact paste (catalog number 249-130).
ATTENTION! It is not allowed to connect aluminum conductors to the Push-in CAGE CLAMP® terminals
(TOPJOB® S fitting family).
Functional features of Alu-Plus contact paste
limiting air access to the terminal and preventing oxidation of the contact points
preventing electrolytic corrosion between aluminum conductors and the copper conductor rail of the connector
elimination of the oxide layer at the moment of introducing the wires to the PUSH WIRE® terminal
providing long-term anti-corrosion protection
Advantages of Alu-Plus contact paste:
preventing electrolytic corrosion between aluminum conductors and the copper conductor rail of the connector
providing long-term anti-corrosion protection
restricting air access to the terminal and preventing oxidation of the contact area
elimination of the oxide layer when the wires are jammed
Instructions for connecting aluminum conductors
Strip the aluminum conductor to the length indicated in the data sheet or on the infographics on the connector housing.
Clean the oxidized surface of the stripped end of the aluminum conductor.
Apply a layer of Alu-Plus contact paste from the applicator to the surface of the aluminum conductor end.
Use a special applicator (syringe) to introduce the contact paste into the opening of the connector, to which the aluminum wire will be mounted, until the clamp is completely filled. For CAGE CLAMP® and Lever-Open Clamps, open the springs with an assembly tool or lever before depressing the syringe plunger.
Insert the aluminum wires into the terminals filled with Alu-Plus contact paste.
Remember to limit the maximum load capacity of aluminum conductors compared to copper ones:
- 2.5 mm² (Al) = max. 16 A
- 4 mm² (Al) = max. 22 A
Installation fittings, series 2273 and 773
Series 2273
Insert the tip of the syringe with Alu-Plus paste into the holes of the adapter. Press the applicator plunger until the paste visibly fills the inside of the coupler. Then insert the wires into the terminals.
Series 773
Proceed in the same way as for 2273 series couplings.
Lighting fittings in the 224 series
Insert the tip of the syringe with Alu-Plus paste into the circular PUSH WIRE® clamp and then into the rectangular CAGE CLAMP® opening of the lighting fitting. Then insert the wires into the terminals. Press the applicator plunger until the paste visibly fills both holes.
Universal couplings from the 222 series
Open the levers on all clamps of the coupler. Insert the tip of the syringe with Alu-Plus paste into the holes of the adapter. Press the applicator plunger until the paste visibly fills the conduit holes in the connector. Then insert the wires into the terminals.
CLASSIC rail-mounted terminal blocks with CAGE CLAMP® terminals up to 4 mm2
Open the clamp with the mounting tool and insert the tip of the syringe with Alu-Plus paste into it. Press the applicator plunger until the paste. In this way, fill the next clamps of the strip. Then insert the wires into the terminals. visibly fill the hole in the clamp.
Installation couplings with a lever from the 221 series and TOP JOB® S Rail-Mount Terminal Blocks
It is not allowed to connect aluminum conductors with 221 series installation couplings and strip terminal blocks with Push-in CAGE CLAMP® terminals. "
Link (March 13, 2021): www.wago.com/pl/technika-lacz...
#WAGO #ALUPLUS #ALUMINUM # WAGO222 # WAGO224 # WAGO2273 # WAGO773 #CAGECLAMP #PUSHWIRE

Пікірлер: 42

  • @igornedashkivskyi1472
    @igornedashkivskyi14722 жыл бұрын

    Дуже корисне відео, особливо для серії 221, так як я використав саме її у себе на старій квартирі для алюмінієвої проводки. Дякую!

  • @MiiSbk
    @MiiSbk2 жыл бұрын

    It’s better not to use sandpaper since it leaves residue on the conductor… Manual specifically says “clean with a blade”, there’s a reason for that…

  • @milleniumfalcon9677

    @milleniumfalcon9677

    Жыл бұрын

    The problem here is that Aluminum oxidizes almost instantle, so neither solution is right. You must remove oxidized layer mechanically with the paste present on the conductor. This guy explained it good enough: kzread.info/dash/bejne/dGRprtdwmJi6mco.html

  • @janwojcik6724
    @janwojcik67243 жыл бұрын

    Milo i na temati prawde

  • @ForumWiedzy

    @ForumWiedzy

    3 жыл бұрын

    😉👍

  • @slovakjakpica
    @slovakjakpica7 ай бұрын

    Been using with 221 series till they stated not use it with 221 series, now what ? Should I go and replace all wagos back to 10 years? They work fine with 221 too...

  • @laszlohorvath1540
    @laszlohorvath1540 Жыл бұрын

    ALL slot must be filled...

  • @szalayrichardnak
    @szalayrichardnak5 ай бұрын

    Because 221 copper is the inner clamp

  • @przemyslawleszczynski2360
    @przemyslawleszczynski23603 жыл бұрын

    🙂

  • @ForumWiedzy

    @ForumWiedzy

    3 жыл бұрын

    😉

  • @Tbnfd3
    @Tbnfd32 ай бұрын

    Jako "tylko czasem pomocnik elektryka" zapytam: Czemu 221 nie jak to wg mnie tal samo dziala jak te wszystkie inne podobne co tez maja dzwignie... Ps a te podobne do 221 pomaranczowych ale co maja czerwona dzwignie ? Tez nie czy mozna ?

  • @ForumWiedzy

    @ForumWiedzy

    2 ай бұрын

    Tak WAGO uznało, tak ma być, tak ich testy wykazały.

  • @Tbnfd3

    @Tbnfd3

    2 ай бұрын

    Oo moja odp automatem chyba została skasowana pomimo że napisałem normalnie. Dziwne...

  • @ForumWiedzy

    @ForumWiedzy

    2 ай бұрын

    @@Tbnfd3 ja niczego nie kasuję.

  • @21trips
    @21trips2 жыл бұрын

    Wago 221?

  • @ForumWiedzy

    @ForumWiedzy

    2 жыл бұрын

    Wago w poprzednim roku zmieniło wytyczne i ustalili według jakiś swoich testów, że 221 może się przegrzewać i nie zalecają ich używania. Pozdrawiam

  • @21trips

    @21trips

    2 жыл бұрын

    @@ForumWiedzy Dziękuję Ci.

  • @JarekSkorpion

    @JarekSkorpion

    2 жыл бұрын

    @@ForumWiedzy a mi dzisiaj gościu w hurtowni elektrycznej właśnie wcisnął 221 do łączenia miedzi z Alu i powiedział że wg. Katalogu to właściwie to samo co 222. Powiedziałem mu że chce przekazać Alu wychodzące z podłogi . Żeby zrobić gniazdka i potrzebuje to łączyć to powiedział że tylko pastę muszę gdzieś kupić bo oni nie mają. 😡😡 Czyli co. Lepiej to zostawić i kupić sobie 222 z pastą i będzie dobrze? Mieszkam na stancji, nie dużo place . Ale już połowa gniazdek nie działa a kable 5cm nad podłogą. Właściciele nic nie zrobią . A nie chciał bym im chałupy spalić. Właściciel jak był ostatnio to mi na ryja skręcił miedź z Alu i przedłużył przewód w ścianie który się upalil idący bezpośrednio od bezpieczników do gniazdek. To też chyba lepiej rozkręcić i złożyć na Wago 222 z pastą? Bo już widzę że izolacja przetopiona i między kablami zielono się zrobiło 😡😡😡

  • @ForumWiedzy

    @ForumWiedzy

    2 жыл бұрын

    @@JarekSkorpion wiesz co robić, film temat wyjaśnia dokładnie. Lepiej spać spokojnie.

  • @genemetz1945

    @genemetz1945

    Жыл бұрын

    @@JarekSkorpion - Please repeat in English.

  • @prochitayrazgovorsekstremistom
    @prochitayrazgovorsekstremistom3 жыл бұрын

    55362 кремний - вазелиновая паста аналог цинковая вазелиновая мазь

  • @ForumWiedzy

    @ForumWiedzy

    3 жыл бұрын

    ?

  • @user-xz3qj8tb1j

    @user-xz3qj8tb1j

    2 жыл бұрын

    Цинковая мазь из аптеки подойдёт?!

  • @prochitayrazgovorsekstremistom

    @prochitayrazgovorsekstremistom

    2 жыл бұрын

    @@user-xz3qj8tb1j один человек озвучивал ,что да

  • @Alex-Orman

    @Alex-Orman

    2 жыл бұрын

    А простой вазелин подойдёт? В теории он будет защищать от попадания кислорода

  • @prochitayrazgovorsekstremistom

    @prochitayrazgovorsekstremistom

    2 жыл бұрын

    @@Alex-Orman да,любая смазка защищает

  • @ryszardgrzejdziak7433
    @ryszardgrzejdziak74333 жыл бұрын

    W instalacjach elektrycznych domowych nie dopuszcza sie laczenia przewodow aluminiowych z miedzianymi.

  • @kolejowydolnyslask5684

    @kolejowydolnyslask5684

    3 жыл бұрын

    Właśnie po to ta pasta.

  • @ryszardgrzejdziak7433

    @ryszardgrzejdziak7433

    3 жыл бұрын

    @@kolejowydolnyslask5684 Pasta zapobiega utlenianiu przewodow. Prawda. Ale sa jeszcze inne czynniki. W instalacjach elektrycznych nie dopuszcza sie laczenia przewodow aluminiowych i miedzianych. Prosze zwrocic uwage na obciazenia pradowe.Przewod aluminiowy dla tego samego pradu powinien miec wieksza srednice. Przewod aluminiowy ponadto z biegiem czasu staje sie bardziej kruchy, jest wiec bardziej podatny na uszkodzenia, nawet samoistne. Ponadto inny parametr to starzenie sie przewodow aluminiowych. Ponadto pasta zapobiega przynajmniej w teorii utlenianiu. Ale z czasem wysycha. Przepisy sa jednoznaczne. Nie dopuszcza sie.

  • @kolejowydolnyslask5684

    @kolejowydolnyslask5684

    3 жыл бұрын

    @@ryszardgrzejdziak7433 co prawda to prawda. Nie dziwię się że już się ich nie stosuje.

  • @slovakjakpica

    @slovakjakpica

    7 ай бұрын

    Its not true, you can not connect directly aluminium with copper, but if you use for example wago, there is no problem. Lot of old installations use aluminium cables... and these installations often need to be repaired or extended.. and there is no point of doing it with aluminium again due to its disadvantages...

  • @ryszardgrzejdziak7433

    @ryszardgrzejdziak7433

    7 ай бұрын

    @@slovakjakpica i didnt say like this. Of course it is possible. But read carefully what is written. Maybe in your country electricians still do it. In my one no.

  • @mac-gyver
    @mac-gyver3 жыл бұрын

    Of the f..k...from where is the number 243-130? This is made in Poland or made in China? Under WAGO product this number not exist and original Alu-Plus lubricant is 249-130. Removing isolation from AL wire with a knife on video is totally unprofessional (there is a risk of cutting into the "aluminium" wire core- "creating a breaking point" )... Terminals and spring systems in series 221- is with technology Push Wire®

  • @hcristian6152

    @hcristian6152

    3 ай бұрын

    Wago Alu-Plus 249-130 nu are restricții pentru modelul din seria 221

  • @wedkarskietaktyki4446
    @wedkarskietaktyki44463 жыл бұрын

    Pasta powinna być we wszystkich dziurkach jak zaleca producent.. Bzdury totalne

  • @iwon44

    @iwon44

    3 жыл бұрын

    Zajmij się łowieniem płotek.

  • @ForumWiedzy

    @ForumWiedzy

    3 жыл бұрын

    Sprawdź zalecenia na stronie WAGO, dodatkowo przeczytaj do czego służy pasta i dojdziesz do logicznych, właściwych wniosków. Tu masz wszystko dokładnie omówione, pokazane, razem ze źródłowymi informacjami: kzread.info/dash/bejne/lKl6msaQisauac4.html Pozdrawiam

  • @ForumWiedzy

    @ForumWiedzy

    3 жыл бұрын

    Albo leszczy 😉

  • @wedkarskietaktyki4446

    @wedkarskietaktyki4446

    3 жыл бұрын

    @@ForumWiedzy haha kocham takich partaczy nie wiem ale się wypowiem

  • @ForumWiedzy

    @ForumWiedzy

    3 жыл бұрын

    ? Zobacz cały film, potem się wypowiadaj. Pozdrawiam

Келесі