How to Connect 3v LED Light to 220v AC | 3v LED Directly with 220v AC | 220v AC to 3.7v Converter.
Ғылым және технология
How to Connect 3v LED Light to 220v AC | 3v LED Directly with 220v AC | 220v AC to 3.7v Converter.
Required instruments and materials:
1. 2pin plage---------------------1p
2. Diode----------------------------2p
3. LED-------------------------------1p
4. Resistor 100k ohm---------1p
If you have enjoyed This video then please like, comment and don't forget to subscribe.
Thank you for watching.
Welcome to my channel "MonoTech Master"
#220v_AC_to_3.7v_converter
#Connect_3v_LED_Light_to_220_AC
Пікірлер: 131
THANK you very much.
@MonoTechMaster
3 жыл бұрын
Welcome
Lazawab style dikhanae ka... Wahh
@MonoTechMaster
2 жыл бұрын
yes sir. Thank you.
Good experience in electronics
@MonoTechMaster
5 ай бұрын
Thanks
Nyc bro
@MonoTechMaster
2 жыл бұрын
Thanks
Ok felicita
@MonoTechMaster
3 жыл бұрын
Thanks
Good
@MonoTechMaster
4 жыл бұрын
Thanks bro
Khub valo hoyche bhai
@MonoTechMaster
4 жыл бұрын
Thanks bro
Hello. I tried this and it works. But the light is not too bright. Should i try reduce the resistor by 3/4? ( use 68k?)
@rajendraharsora8006
Жыл бұрын
68k chalega
Impossível funcionar desta maneira... testei até no Simulador de Circuitos (Falstad).😮💨
@MonoTechMaster
Жыл бұрын
Yes
VERY good,,,!watts of 100K resistor,,?can we connect2/3,led. In parallel,,or in series, __please draw near diagram with names&exact value of components..
@MonoTechMaster
3 жыл бұрын
1 watt resistor. thank you.
@irfanhidayat8315
3 жыл бұрын
What? 1watt resistor? Thats 1/4 watt your resistor
@souravbhattacharyya3392
2 жыл бұрын
@@MonoTechMaster But you connected a quarter watt resistance!
Is it possible to use this as a 240v indicater to main supply board
@MonoTechMaster
2 жыл бұрын
Yes possible
In my opinion one diode was more than enough.
@MonoTechMaster
3 жыл бұрын
yes sir no problem
@KENCINGBERSALTO
2 жыл бұрын
It is safer though
Without diod you can glow the led with only 100k resistance.
@MonoTechMaster
Жыл бұрын
Yes
I made the exact same setup but when i turn it on it works but my resistors feel warm when i put my finger on it
@MonoTechMaster
2 жыл бұрын
Yes 100k resistor
Solo para 220 voltios y no sirve para 120 VAC. ?
@MonoTechMaster
Жыл бұрын
Yes
can I use another diode, for example, 1N4738?
@MonoTechMaster
Жыл бұрын
Yes
Diwali ki laddi se 1indiceter nikal kar kese chalay plz daseo ?
One resistance from 100 k to 180 k is enough
What is the value of the resistor. like for you
@MonoTechMaster
3 жыл бұрын
100k. Thank you.
240 ya uses adhik voltage par kya work karenge sir.
@MonoTechMaster
2 жыл бұрын
yes sir. Thank you
Can we use 8mm led in this circuit
@MonoTechMaster
3 жыл бұрын
yes sir. thank you.
कितने महीने तक चलता है ये led bulb... अंदाज़ा बताईये?
@MonoTechMaster
2 жыл бұрын
Thank you sir.
I tried this, step by step and then the resistor burnt off. There is something different as compared to what is shown in the video. My resistor color band is Brown Black Red Gold which is 100K
@MonoTechMaster
3 жыл бұрын
ok thanks
@godsowncreator1994
3 жыл бұрын
Brown black red gold resistor is 1k bro not 100k.
@SENTHIL11
Жыл бұрын
Brown black yellow gold is 100k
Can we use 220k ohm resistor instead of 100k ohm resistor?🤔🤔🤔
@MonoTechMaster
3 жыл бұрын
You can try, but it is better to use 100k ohm resistor. Thank you sir
I tried this but the LED was burned. Did you really plug-in this project to 220v AC outlet? What wattage of resistor did you use. Thanks
@MonoTechMaster
3 жыл бұрын
In fact I lit the LED and it was very nice. I used a resistor of 4watts here. If you try it properly, it will work. Thanks.
@mmustafa5020
3 жыл бұрын
You didn't used right resistor.
@arunk8663
5 ай бұрын
I too done like this but I used 100k resistor 1/4 watt and one diode only. What's the benefit of diode across LED, can you please reply
3volt ki led 47 I 56 I ohm or 4007died se chalti h Ja 100k ohm se Kaun sa rajister sahi rahega
@jellysohi3240
3 жыл бұрын
47k 56k ohm
@MonoTechMaster
3 жыл бұрын
try to it
Yung flasligth ko na led 3.7v ung battery nya. Gusto ko sana na maging 220v na. Pwede ba
@MonoTechMaster
3 жыл бұрын
ok sir thank you
Agr mujhe 6 led chlana hai series me +-+- to kitne ka registance lgayenge
@MonoTechMaster
2 жыл бұрын
yes
Get full brightness?
@MonoTechMaster
2 жыл бұрын
yes sir Thank you.
56k Registon....
@MonoTechMaster
3 жыл бұрын
no sir 100k is batter thank you.
çıkış voltajı tam olarak nedir? teşekkürler
@MonoTechMaster
2 жыл бұрын
Yes
@abdullahozdemir8886
2 жыл бұрын
@@MonoTechMaster What exactly is the output voltage? thanks
Mere pass 100 k ka registance ha pr wo green colour ka hai.. aur usse led fuse ho ja rha h kya kare????
@MonoTechMaster
3 жыл бұрын
If all the connections are correct then you can use any color LED but there is no problem but I don't understand the reason why you have this problem. You see all the connections correctly.
Are you sure ki ye 220volt par chalega . And one thing aj kal ac current voltage bohat hota he 220 se ziada hai 267 volt ka aa raha he maine aj hi check kiya hai multimeter se to usme kya ye kaam karega... please reply
@MonoTechMaster
3 жыл бұрын
You can run it up to about 300 votes
@indianboomer2272
3 жыл бұрын
@@MonoTechMaster thank you bhai
@indianboomer2272
3 жыл бұрын
@@MonoTechMaster it runed it is true
Can l use 100 k register?
@MonoTechMaster
3 жыл бұрын
yes sir. thank you
But how long it will stand ?
@MonoTechMaster
2 жыл бұрын
yes sir no problem.
Registence kitne "k" ki hai
@MonoTechMaster
3 жыл бұрын
100k
100k ohm resistance kitna watt ka hai???
@MonoTechMaster
2 жыл бұрын
1 watt Thank you.
Resistance ka posetive negetive to hota nahi na
@MonoTechMaster
3 жыл бұрын
na nahi. thanks
O meu não ligou... diodos todos inteiros e funcionando
@MonoTechMaster
Жыл бұрын
Yes
@leo55_10
Жыл бұрын
@@MonoTechMaster não funciona desta forma em 220V AC, aqui
@leo55_10
Жыл бұрын
@@MonoTechMaster kzread.info/dash/bejne/k4x2l8x_cZzAl5M.html O circuito acima, sim
@leo55_10
Жыл бұрын
@@MonoTechMaster do jeito que faço consigo uma saída de 2V... ou seja... um circuito mais durável
लगातार 4 से 6 घन्टे तक चालू रखा जा सकता है क्या ॽ
@MonoTechMaster
3 жыл бұрын
yes sir no problem
Not mentioned the values of resistor and diodes
@MonoTechMaster
2 жыл бұрын
100k ohm resistor and 4007 diode.
Resistance &diode value kya hai?
@MonoTechMaster
3 жыл бұрын
Resistor- 100k ohm Diode- 4007N
@KEVINN651
2 жыл бұрын
Mera led ekdom dhimi kyun jal raha
Neviem, načo je tam tá dioda paralelne k LED ke. Ak bude na jej anóde plus, tak nikam neprejde
@MonoTechMaster
Жыл бұрын
Yes
Resistor value not mentioned
@MonoTechMaster
Жыл бұрын
100k ohm
كيفيه صنع لمبه
@MonoTechMaster
2 жыл бұрын
Thank you
How much of wattage resistor need to run in 24x7 without heating?
@MonoTechMaster
4 жыл бұрын
no
@manuyadav6696
4 жыл бұрын
@@MonoTechMaster bhai mujhe 4 blue led lgani hai parallel main 220v ac supply par kaunsa resistor use krna padega aur kitney watt ka ek hi resistor lgana hai
@amrinder9585
3 жыл бұрын
@@MonoTechMaster it means it will not run continuously for 24x7
It is flickering.. Will cause eye strain and fatigue
@MonoTechMaster
3 жыл бұрын
Thank you sir
I'm pretty sure you only need one diode
@MonoTechMaster
Жыл бұрын
4007 dide
@rajendraharsora8006
Жыл бұрын
Without diod you can glow the led with only 100k resistance.
This is 3v not 3.7
@MonoTechMaster
3 жыл бұрын
yes thank you
@Akshay-pe4fp
3 жыл бұрын
@@MonoTechMaster I want to know how to make 4 volts dc plz help
@MonoTechMaster
3 жыл бұрын
ok via
foooling people... why putting other on risk...
@MonoTechMaster
2 жыл бұрын
it's a real circuit
@technicalmudassir4679
2 жыл бұрын
This is not a recomended circuit... Circuits with bridge rectifier 220 to 12vdc and 9vdc and 5vdc are efficient. Not this one can b used on ones own risk. 100% risky hai. Voltage Drop calculations problems.
@technicalmudassir4679
2 жыл бұрын
You Got good views that would appreciated not this circuit.
Is it possible to use this as a 240v indicater to main supply board
@MonoTechMaster
Жыл бұрын
Yes