How to Configure a RAID on a Dell PowerEde R710 R610 Server PERC6i
Тәжірибелік нұсқаулар және стиль
Please follow the instructions on the video on how to configure the RAID on PERC6i Controller. This guide also works on any server with a Dell PERC6i/R Controller such as; Dell 2950, 1950, R900, R410, and R310
If you are interested in purchasing an R710 Server please visit our amazon page TechByDesign on the link below
www.amazon.com/gp/offer-listi...
Please like an subscribe for more videos on server hardware & software set up
Пікірлер: 111
For those who are newbies, you must press Ctrl R to access the Virtual Disk Management.
@user-zv3lj1ef7l
3 ай бұрын
thank you
Just wanted to tell you that this video is exactly what I needed to get my R710 Server's Raid configuration in BIOS up an running. Clear, to the point and instructive if you are looking to get the R710 to handle 2 drives that are not showing up when installing ESXi, in my case. Thank you so much!
@ArafatMedia
6 жыл бұрын
kzread.info/dash/bejne/mWaKxpKQpLKzeso.html Dell Server Model Number Details.
I was having some issues with my poweredge 710 that I got from a friend, tried putting new drives in with a fresh copy of windows server 2019 and the drives would not show. Turns out reading on some forums that a pre-exisitng raid set up could cause this issues. This video helped me out so much and I was finally able to start the OS install. Absolute life saver!
Finally a fast and simple one for configuring my server
Thanks for the video, especially the fast initialization. I have done some regular init's and it took over 24 hours for the drives to be cleared.
Thank you. This video has very helpful, and not excessively talky at all. Well done!
Thanks for making this video. It made it a breeze to set this up on my Dell PowerEdge R520.
Thanks for the informative video. you have helped me where I was stuck for an hour of operation.
Sweet bud, very clear and concise. Easy to follow, subbed!
Super thanks for the video. Worked perfectly on my PowerEdge R610
Many, many thanks! Exactly what I was looking for!
Thanks this really helped me get my server running, so much different then setting up a desktop pc.
@eromprakashsharma4208
3 жыл бұрын
Pls hep me dell server Reid configuration
Thank you very much! Fast and simple way.
Awesome and easy to follow thank you!
Thank you for a great video, keep up the good work!
Really enjoy your video keep up good work it's really help me a lot to configure the VD
Thank you for this video, greatly helped
Crisp and spot on video..cheers
Thanks for the video! Good Blessed you!
that was super helpful~ thanks!
Excellent video, thank you for sharing.
Thanks,was of great help
Thank you. This was grate.
How wonderful, very, very, very wonderful explanation method, do more videos
Great video.
Succinct and useful. Thank you.
great tuto !
Thanks bro 👍👍👍👍 great work
Great Video
awesome video! Thank you so much!
@ArafatMedia
6 жыл бұрын
kzread.info/dash/bejne/mWaKxpKQpLKzeso.html Dell Server Model Number Details.
Great Video worked great for me, Thanks
@ArafatMedia
6 жыл бұрын
kzread.info/dash/bejne/mWaKxpKQpLKzeso.html Dell Server Model Number Details.
Thank you bro
Thank you very much 😊
Good value
Ola meu amigo Muito obrigado você me salvou esta em apuros com esse systema que não tinha conhecido parabéns !!!
Thanks sir. very useful for me. 5star
Simple and Easy
Perfeito, direto ao ponto.
Did you make this using the iDRAC/iLO or does dell have an simulator?
Nice Video. Answered a few of my questions. As long as I don't Initialize the VD, can I delete a VD to create a different RAID config?
Thank you for this video! Could you make another video and hit the keyboard a little more harder? It's not loud enough. LOL
if im putting freenas on the server should i do this in the controller setup like this or within the freenas UI
ty so much
How do you add another drive if you need more space, for Raid 10?
Thanks thanks
Can I make with a Dell T630 16bays model 2 RAIDS 6 with 8 drives 6TB and stripe the togheter in Windows Server 2012 R2?
thaanks for the video ! why is the VD Size less than the PD disk size ?
thanks a lot dude! I have a further question. Is it possible to install 2 new hard drives and make them RAID 1 while the original HD running the OS without any RAID?
thanks you
I have a Dell poweredge R510 with a Perc 6/I raid controller. I have 5 drives (2TB per Drive) in RAID 5 with 1 PD as a dedicated hot spare. I need to now make the partition in windows. It’s over 2TB so I assume I select GPT vs MBR? Do I create the partition in disk management as a simple partition or what partition do I select? Thanks!
I got a cheap R610 server with just a 1.2 TB 10K SAS disk, but the performance of the vms are very slow. Can i improve the performance attaching more drives?
10Q I really love it
How can i make two seperate virtual drives from the two seperate drives?
Hi, really cool video!, i have a question, if i make a Raid 1(with 2 hdd) and whant to take out 1 of the disk from the Raid 1 and use it for extra space, how i can do this? i look for this over the internet for a week without geting a clear answer, Note: i cant loose the info, just whant to format 1 of the disk for extra space. Thx!
any ideas as to why I cant set a raid level? it's just greyed out for me
Smash that enter key,punch it in the face.
@DavidAmmerlaan
4 жыл бұрын
Lol
Hello Sir, You video is really awesome but I get an error when I hit ENTER, the error says "Virtual disk creation failed". For your information I am using brand new hard drives and in PD management it's showing as READY state. you advice will be of great help.
Works the same for the Dell R 920 with E7 chipset.
How to enter the virtual disk management page? What key i should press during startup?
Great video -- Thanks! Also, what is that terminal screen host that you are using to see your boot-up?
@amitdubey986
3 жыл бұрын
It appears to be IDrac
Hi sir i have problem on my dell R710 server . I have a three drive on my server on of them is damage i put a new one drive on server . The new drive is ready state the old two drive is online . What can i do farther. Plz help me
i love it soo much plese and make video how to install WINDOWS init
Just letting ya know r710 raid controller only can compute 2.5tb per VD. I found out the hard way. Great video! I have 4x1tb+4x250gb it wouldn't compile them all into RAID0 1 VD. I had to split into 2 VDs 1 VD for the 4x250gb, 1VD for the 4x1TB. So why cant i get all 4TB working in 1 vd but not stacked together?
Could you please show us how to change the hard drive status from the Blocked to the Ready I am stuck on this one. I am trying to GPART hard drive using GPARTED Live for that I need to make RAID 0 on each hard drive to be able to see in GPARTED but few storage devices are coming up as Blocked so I can not apply RAID on it. I have tried with the firmware updates but still the result is same. I am not sure what I am missing here. I am using R630 and PERC is H730. I would really appreciate if you can enlighten me with the procedure of to unlock the storage device in PERC H730 Dell R630. Thank you for your time :)
this is about the best i seen so far on using The PERC 5, thank you. But just a question real quick, when you do initialization, if there is a operating system on the drives, does the fully wipe it, where you can do something like install a fresh copy of windows server 2003?
@The2011mc
7 жыл бұрын
If you delete the whole RAID Config. and start the initialization you will loose all data so you have to install the OS new (fresh)
@difficultinterest1582
7 жыл бұрын
Dave Terry
is there a way for the computer to see the 2 drives as two separate drives like on a normal PC? I have 2 1tb drives in the r610 that i want to store 2 separate libraries on. in a raid they backup to each other correct?
@donpayette7062
5 жыл бұрын
RAID-0 would be close. It just does striping, but I'm guessing it might show up as one large drive. What you want is JBOD (Just a Bunch Of Disks) or "no RAID". I might look around for that option. Unfortunately, my two R610s are currently in production on a work day, so I'm not going to reboot one just to look at the config. Sorry. :-) I just thought of a possible way. Just configure two VDs, each with one drive in it. That ought to do.
Hi there .. Could really use your help. I am trying to set RAID 0 on the Dell T7500, using its onboard Marvell SAS controller for a backup drive and use an SSD as my boot drive. The system anyhow is not working as it expects me to load the OS on the raid drive. Can i set up SSD for boot and the RAID drives as a backup ? Is this a valid option ?
@ServerTechGuy
4 жыл бұрын
Do you have the model number of the onboard SAS controller. in order to run a back up you would have to run to partitions one RAID independently for the SSD and one RAID for the back up drive
I have a question. Just purchased a Poweredge t610 (the tower variant) - for home usage............ How reliable do you reckon the RAID system is on this old hardware? I'd hate to set up RAID and have it fail. I guess it's a difficult question to ask, but would you know what the failure rate is after 10 years? Thanks.
@danielalarcon6522
4 жыл бұрын
Its actually not bad I've ran old units for a long time and everything in a server is meant to be redundant. If the controller fails the drives are still active and the cache keeps the RAID configuration. I suggest keeping a spare RAID controller to prevent any down time and a spare drive
hi can someone advise me on this as i have new R730 server and not sure which one to configure OS or RAID? what is the best practice and the impact
@ArafatMedia
6 жыл бұрын
kzread.info/dash/bejne/mWaKxpKQpLKzeso.html Dell Server Model Number Details.
A question, how do I get the mouse cursor out, is there in that part I have to use a parallel port mouse, I hope for your help, thanks
@josesolis8335
2 жыл бұрын
I have the same problem, how did you solve it?
Hi, I have a problem with my R710. I bought 4TB HDD and i want make a new VD, but in RAID configure console it just shows me 2TB of my HDD space. what should I do. I update every possible firmware by the way. Thanks
@ServerTechGuy
7 жыл бұрын
You need to switch the drives to GPT and change the BIOS to UEFI in order to recognize 4TB drive
How do I bypass this? I want the OS to see all drives directly. When I removed all the virtual disks, the OS saw nothing.
@solmesteren
4 жыл бұрын
Did you find an answer?
My new drives show up as READY? howto make them go online?
@santoncraig6139
5 жыл бұрын
I also need to make 2 of my 4 drives get to ready. How???
If I had 8 drives could have 4 of them in RAID 1 in 4 groups, or is there a limit on the number of groups ?
@xtreme2043
7 жыл бұрын
no. you can't have the RAID 1 for 4 hard drive, but you can have RAID 5 or 10. But for 8 hard drive I would choose RAID 10.
@dr.marvel870
6 жыл бұрын
I don't see why you couldn't. 8 disks 4vds in raid 1
My disks show as Ready, how do I get them Online please?
@hughg.rection3908
5 жыл бұрын
Yo, if anyone has fixed this issue, please respond
T310 compatible tutorial can anyone help
What button / key do you press to access the perc raid configuration to set up raid on your hard drives
How do you get into the RAID? You vide start in the RAID.
i followed your video, but i am still having trouble finding the disk drive and installing windows server
my esxi still cant detect the HD Storage. !!
will this work on the t710
@The2011mc
7 жыл бұрын
Yes
my drives show up but they wont let me put them online
I got error invalid SAS MSF server doesn't start up it doesn't even accept ctrl+r
I guess it's the same with a H700 ?
@ArafatMedia
6 жыл бұрын
kzread.info/dash/bejne/mWaKxpKQpLKzeso.html Dell Server Model Number Details.
perfect tutorial, but please don't press the enter key that hard
Could you hit the enter key any harder? LOL Press enter BAM SMASH the enter key! Easy on those keys man
Poor enter key 😂🤣😂
Why are you slamming on your fucking enter key