How to clean your GE Profile washer/dryer combo

Step by step instructions on how to do the monthly cleaning on the GE Profile washer dryer combo.
links to tools used in video:
a.co/d/bbdPdpA
www.amazon.com/dp/B089Q4QHTF?...
a.co/d/4GarIz5

Пікірлер: 18

  • @LizSMJ
    @LizSMJ5 күн бұрын

    Very good information 😮!!! Thank you for sharing this video 🎉

  • @RedErin
    @RedErin29 күн бұрын

    Every time I take the laundry out I pull the lint tray half way out, it lets all the moisture out so I don’t have the wet lint like you were trying to clean out. Especially after the last load at night, it thoroughly dries and makes any cleaning easier.

  • @sharonreinhold2149

    @sharonreinhold2149

    27 күн бұрын

    Great tip! I will try that 😊

  • @RedErin
    @RedErin29 күн бұрын

    Have this machine also and love it. Maintenance is so much easier than my old style set. A standard dryer you have to clean the lint filter every time and so this is not any extra work (except for the extra foam filter but that rinses out so fast and you don’t have to do it as often, I don’t vacuum it I just fold it in half and sort of scrape my fingers along it to pull off any fine lint and dog hair under running water). For us the huge benefit is never ever needing to clean out our 2 story high vertical dryer vent pipe. This is the first appliance where I’ve felt the future has actually arrived!

  • @TwoCaptainsOneShip
    @TwoCaptainsOneShipАй бұрын

    Well done…have had the machine since March 11…almost 200 loads already…

  • @Teri_Head
    @Teri_HeadАй бұрын

    We purchased ours last July ‘23 when they first came out. I absolutely love mine. I wash my filter, the left side, I take it to the kitchen sink and scrub it allover with a super soft toothbrush and dawn. The left side of the filter gets almost like a film covering it and I like to scrub that all off.

  • @Dawn-k1s
    @Dawn-k1s21 күн бұрын

    Very helpful. thanks

  • @simisonicblack
    @simisonicblack24 күн бұрын

    Very awesome video good sir! Thank you for sharing this information

  • @FelipeLopes..-dc5xt
    @FelipeLopes..-dc5xtАй бұрын

    Thanks for vídeo..😁👏👍

  • @jenniferlee1066
    @jenniferlee10662 ай бұрын

    We are getting ours delivered very soon and this video was very helpful in showing me how to properly maintain the machine. Thanks!

  • @BrujahLoca

    @BrujahLoca

    Ай бұрын

    Remove the entire filter and allow machine to dry out a bit, this makes cleaning SO much easier. If you have pets make sure to enable pet mode in your settings, this will help remove pet hair from laundry BEFORE the wash cycle. Insure to be careful with blue condenser on the right! Leave the machine door open between cycles allows it to completely dry out and makes cleaning the rubber seal easier. KEEP YOUR MACHINE UP TO DATE! there are always new cycles being added ❤️

  • @jenniferlee1066

    @jenniferlee1066

    Ай бұрын

    @@BrujahLoca Wonderful! Thank you!

  • @sharonreinhold2149

    @sharonreinhold2149

    Ай бұрын

    Glad it was helpful! I was unable to find much when we got ours, so thought I would help others that needed it. 😊

  • @jayodekirk
    @jayodekirkАй бұрын

    Thank you

  • @macsterguy
    @macsterguy23 күн бұрын

    Great maintenance video!

  • @MrsGRock82
    @MrsGRock827 күн бұрын

    I had no idea the part on the bottom was there.

  • @CraigKubisz
    @CraigKubisz19 күн бұрын

    The removable lint trap is easy to clean and has to be done every wash ,the inside requires more work because of its very poor design . The drain pump strainer is easy to clean IF YOU CATCH IT IN TIME ,clogged it stops the machine BUT the red warning light only came on once and you will deal with a lot of drain water that you have to empty .........so yes this thing needs owner maintenance on a regular basis much more frequent than older models

  • @shaunmwoolley
    @shaunmwoolley19 күн бұрын

    Any tips on how to level the machine? Even with it level according to a level on top multiple ways, the unit still shakes when starting a load. I have a similar setup as you, pedestal and pushed into a somewhat tight spot. I’m wondering if my floor is not strong enough right under the legs and no matter how level it says it is, it will still shake because of the floor. How do you level the leg in the back corner? I feel like appliances should have self leveling legs or easier ways to adjust the back legs from the front of the machine so it can be leveled in place.