This is 10x better than the official Wagner video on cleaning. Thank you for sharing this, very useful! Cheers.

Great, thanks Bill. You are much more better than official Wagner Instructons. Greetings from Munich/Bavaria.

Your a natural teacher, great to see in a realistic setting with no BS. thanks Bill 👍

@billshowto

3 жыл бұрын

👍

Awesome video, not even the manufacturer explains it this well. Thanks so much for your help!

Thanks Bill, I wish everyone was as efficient as you. 👍👍👍

Thanks for the video man I bought my 350M yesterday desperate to use it and now I know the best method for cleaning it!

I've been going through several buckets of water cleaning my 250M. Hadn't thought to remove the feed hoses and clean them first! First two buckets are instantly polluted with the bozo method.... Thanks!

Yes yes yes!!! This video is absolutely brilliant! I have the 250 version and will be following your advice.

Watched quite a few videos on this sprayer, but you are the first to show me all the parts and how to clean it properly, thank you for that.

@billshowto

3 жыл бұрын

You’re welcome 👍

This was a really good video. No fluff, no time wasting to, just on point.

Thanks Bill, great explanation. You are the man 😎

You’re the man. Really enjoying your videos. Thanks a million Bill!

@billshowto

2 жыл бұрын

You’re very welcome 👍

Another absolutely fantastic video. More of these videos PLEASE

hi Bill just purchased sprayer, you saved me a heap of reading thanks kind regards peter

This is such a helpfully video, ive watched it a few times. Thanks so much for sharing your knowledge and experience with us.

Another great video Bill, and a very efficient cleaning routine!

@billshowto

3 жыл бұрын

👍

@AA-cb7vz

9 ай бұрын

hey Wagner what cleaning solution do you use to clean the unit after using enamel paint?

Nice one bill I'm going to use my brand Wagner 350m tomorrow to mist coat cant wait to use it

love the channel bro, going to buy the 150 this week.

Thanks for the tips Bill. I’m looking at this in the skid model for just under $1000 from total tools. Thanks again for the videos

@grantmills1886

Жыл бұрын

I'm about to buy the skid one What did you think of it

@topshelfcleaning1

Жыл бұрын

@@grantmills1886 hey mate, it works fine, the taller one is probably easier to feed the hose into the paint tin, but I just use a milk crate to lift it up

Wish id have seen this before my first clean. Great video Bill!

This is very helpful. (had been cycling water for about an hour - felt there should be an easier way - and you just showed it. Going to try this as we speak) Cheers from Amsterdam

Perfect thanks once again for a great demonstration on how to maintain the equipment 👍🏻👍🏻

@billshowto

3 жыл бұрын

You’re very welcome 👍

@mickeymouse6360

3 жыл бұрын

All the best for 2021 keep up with the videos my friend 👍🏻👍🏻🇬🇧

Thanku buddy, best video yet, I have just purchased this Wagner sprayer and I will follow your breakdown and cleaning steps, thankyou Louie from Northern Ireland

@JONO3679

2 жыл бұрын

This is not how its done... takes to long... probably is first machine

Mate you are a legend loved watching your videos on this machine as you have made it so much easier to start with. Good on ya bro!!! 🤙🏻🤙🏻

I wondered how to get that filter! Now I know. Great info

Thanks. It's very helpful!

Definitely great explanation 👌.

Thanks Mate! Very helpful.

Great info! Thanks for the vid!!

Nice job Bill cheers

Very good tips! Thanks! :)

Nice and easy, thanks for sharing👌

Fantastic idea

Cheers bro! I'm eager. Looking at their other products for cabs/trims/door spray. Thanks mate for bringing these products to our attention.

@billshowto

3 жыл бұрын

Wagner has awesome products, their flexio range is also good. Each product has its place , hopefully not too long and I’ll have the smaller control pro 150 To test out 👍

@samoanSAIYAN

3 жыл бұрын

@@billshowto looking forward to that and any other pointers you can give in regards to accessories. Cheers mate

Very good video, many thanks to you.

Excellent working

Cool working and good fun

Great video mate thank you, saved me hours

Big THX - also for details.

Awesome mate. All useful info and no BS. Thanks for making this video👍 (The tip on cleaning the intake and prime hoses.. I feel like an idiot for not working that one out myself before I started! No wonder it took forever to come out clean!.)😁

@billshowto

2 жыл бұрын

👍

Thank you mate. Really helpfull.

@billshowto

2 жыл бұрын

👍

Worked for me thanks mate I owe you for investing in one of these 👍👍

@billshowto

3 жыл бұрын

👍👍

Great video Bill.

Excellent thank you

Thanks bro. Good video!

Very useful video. Thank you ver much.

@billshowto

3 жыл бұрын

👍

Wow, that was easy. I wished I'd known this ages ago. I might have used it more. Thanks for this I might start to use this again. Warmest wishes.

Nice Bill. Would love to see a vid of the gun in action and in what circumstances it is more practical than say, a roller. How a bout cut in?

Nice video thanks

Great Video. 👍

Great video, very specific and not the standard "just drive water thru"👍🏻 But I wonder, in a big project anything can happen that makes you wait, maybe 30 minutes to an hour. Do you experience that the 250 can wait som time without be cleaned, or right away you are not spraying, has to be cleaned. Many thanks.

Great video Bill thinking of getting this model Wagner 350, the only thing is thats stoping me as in the UK they do not have a Service Centre so this is the only problem? So I have been looking at the American alternatives but I will see. Whats your view on Wagner as you have one as I would be interested.

Thanks for all your videos. From your experience, what would be the best model and brand to get from all paint sprayers?

Hey Bill love the videos very informative. How do you clean the unit out after using enamel paint? the manual just says use the appropriate cleaning solution

Great video Bill. Did you need to dilute the British Paints Timesaver range (paint and prime in one)?

Hey good job thanks

Thanks for tips and how to brother. Because of your how to videos I got a lot of knowledge. Quick question. Have you done rendering and if you have then is it possible to do a video.

THANKS ALOT

Thank you bill, you’ve taught us all how to use this machine..: ain’t nobody got time for that manual lol Just a question if you use the machine first by spraying primer should it be cleaned before spraying paint?

Thank you for nice snd clear explanation !! 👏👏. Questiion: if I have to spray in the morning and in the evening few days ,, like painting furniture in workshop. it still should be cleaned each time or I could put the gun in buket of water ? Thank you very much !

Awesome vid. I was trying to see whether or not there is a washer between the extension and the tip guard? I’m unsure if I’ve lost something out of it or what but the extension seems to screw pretty far into the guard..? Mines exactly the same as yours. The nut just past the thread seems to go into the guard a bit far?

Would love to see the Pro 150 used and cleaned Bill

Thanx for you tutorial. What do you do with the water whats left in the hose? I use to blow it out with lungpower 💪🏻, can i also blow it out with the machine or is it okay to leave the water inside the hose?

Hi great video i am thinking of getting one of these, I've been looking graco and this one, would you class this as heavy-duty, it could run 6 days a week? can you run cellulose paint with it.

Thanks for a great video Bill, Are you using warm water in the bucket that flushes the unit?

Thanks Bill. I never thought to remove & wash the suction & skinny tubes first before putting them in the clean water. Good tip that I will be doing in the future. I have the 250M & love it. Where do you get your spray tips from?

@tsmithurst

3 жыл бұрын

They are expensive 45 quid from screwfix I'm thinking of getting a graco tip holder and then you can use graco tips there a bit cheeper

Can you oil the pump or try preserve the maschin when storing..great vid

Definitely lot better way of cleaning than the official wagner way. I spent 30 minutes following the wagner way. The way shown in this video makes so much sense and much cleaner way to clean the machine. Definitely following this way next time.

Hi. Is the any need to lubricate the wagner. Other machines recommend this , I asked wagner ,n they were pretty vague. They said if I intend putting it away for a long period put some oil in the suction entry . Any ideas. Great video helped me no end. Regards Vic

I had a Graco magnum a45 pro plus just bought this as the peice of crap Graco broke after 3 jobs. With the Graco you have to put pump gaurd in....do you not need pump guard with this machine? Great video by the way....cheers

How do you clean after using oil-based paints or stains?

Any difference with oil based paint? Do you substitute water for mineral spirits and not wash parts in the sink?

@tdjabamel7685

2 жыл бұрын

Yes spirits

Bill, if using oil based paint (stain blocker!), are you simply using thinners in the bucket instead of water? Thanks

Hello Bill I am thinking of buying this as I do lots of painting jobs When you paint wall and ceilings do you thin the paint down ? Thanks and well done for the gr8 video

@JONO3679

2 жыл бұрын

Did you buy a machine.. how's that working out for you

Hey Bill, do you have to clean between coats?

How often do you change your filters and tips being a professional tradesperson?

That’s a great product, what number on the dial did you use when spraying the ceiling Bill ?

@billshowto

2 жыл бұрын

5 👍

Nice video Bill just one question do you dilute the paint before spray.

@billshowto

3 жыл бұрын

With this sprayer there is no need to dilute 👍

how do you clean the gun though? i shake mine when cleaning it and heaps of paint comes out still, even when the water runs clear

Hi Bil, with this machine, do you thin the paint?

Another great vid bill If I left it overnight before cleaning bill would it be ok to use again the next day ,or would you clean it out every time you use it bill ?

@billshowto

2 жыл бұрын

If you wrap it all up in plastic it will be fine for a day or so. If it hasn’t been wrapped I would clean it all out and hope it hasn’t dried out👍

@martinrogers7312

2 жыл бұрын

@@billshowto thanks bill. My first go on the machine today its like getting your first bike for christmas

Excellent work, what's your name brother?

Hey mate, have you tried this machine with other paint colors?

can i use exterior masonry paint o that Wagner sprayer?

Awesome vid Bill cheers! Do you run any pump armour or household oil through it in prime mode before storing?

@billshowto

3 жыл бұрын

It’s recommended, I haven’t done so yet though to be honest.

@WagnerAustralia

3 жыл бұрын

This is definitely recommended if you're puting it into storage for any decent amount of time! If painting regularly then it is less of an issue.

@beaniebrotha

3 жыл бұрын

@@WagnerAustralia what is the recommended product and how do we actually prime the machine with oil/pump guard

@WagnerAustralia

3 жыл бұрын

​@@beaniebrotha Wagner sells two products suitable for this: 'All Guard' which comes in a 1L bottle, and 'Easy Clean' which is 125mL. (The small bottle is good for about 2 uses). Directions for use: Once you've cleaned up your sprayer, and the water is looking clear, you want to add a bit of the All Guard / Easy Clean to ~1L of clean water. Add enough for the water to change to a nice green colour. To cycle this through your sprayer, place the suction hose into the water/solution mix, and (with the pump set to the 'prime' position), turn up the pressure so it begins to circulate through the pump. Once that is done, we'd recommend switching it over to 'spray', and just spraying a small amount out through the gun (so it's internals are coated too). Finally, release the pressure from the system (by turning the pressure down, switching to prime, and pulling the trigger again), and your sprayer can now be stored away with the solution inside the system. Let us know if any of the above isn't clear.

@antonklimenko5263

3 жыл бұрын

@@WagnerAustralia do you store the hose with water in it or drain it completely and blow the hose through with your mouth or something?) thank you, Antob

Can you spray 2 pack paint with an airless sprayer?

would you say 350r is a good starter sprayer

Thankful for your video The written directions are absolutely horrible. Nothing is in order. Words are left out of sentences and now I have to unlearn what I read in directions and reprogram my brain to Your “most helpful video”. Thank you for taking the time to put this video together for people like me who learned the wrong way from the directions that came with Wagner sprayer so I can be a pro, too!

Would you say this machine uses more or less paint than doing it by the traditional roller/brush?

@billshowto

3 жыл бұрын

Definitely uses more paint but so much easier and faster 👍

Bonjour, dans quel magasin je peux trouver le compresseur, merci beaucoup,

Hey Bill, have you used oil based paint on that machine ? If so, what tip do you use? Cheers bro

Great video but maybe not wash paint in a basin ?

Why go for the 350 M over the 250 M? Is 350 M worth the ekstra35%?

How to clean oil paint, any tipes?

I was wondering how it would go if one would start and end with suction of clean water, maybe with the garden hose waterpressure to release the paint pump. Start-up: One would connect the garden hose on the suction hose, turn on the water, set the switch first to prime then to spray, without running the pump, release the pistol and spray clean water with the pressure of the watersystem, when the wagner sytem is full with water, disconnect the waterhose and put the suctionhose into the paintbucket, then turn on the pump on the low pressure and start spraying in a bucket until paint comes. Cleaning: Take the suction hose out of the paint bucket, put in a clean water bucket or connect the gardenhose again and continue spraying, maybe on a wall that has still to be done, when the water comes the system is clean. Afterwards offcoarse clean the outside of everything. I just don't like it if a high pressure pump like this sucs air.

How long does it take you to clean Bill? I did it for the first time today and it took me about 45 minutes 😂

@billshowto

3 жыл бұрын

lol, it takes about 10-15 mins. You will get faster as you become familiar with the process 👍

@holodray2269

3 жыл бұрын

I've cleaned mine twice. About 45 mins both times. I picked up some good tips from this vid though.

Please I m a nigerian how can order for this machine

Did you use warm or hot water?

@bradford7473

3 жыл бұрын

Warm is best, as it helps to loosen the paint.

Bills, if I need your help, where can I find you? :)

@johnelliott9415

3 жыл бұрын

If there is a service centre in your area they my help

Can you use oil based paints gloss/satin etc and clean it with spirits afterwards

@bradford7473

3 жыл бұрын

That’s what I want to know before I do it. I might ring Wagner and see what they say.

@michaelinkster4977

3 жыл бұрын

Wondering the same thing ... will require quite a lot of it!?