How to Clean the P320 FOR BEGINNERS
Ойын-сауық
If this is your first time to field strip and clean the Sig Sauer P320, this is the video for you! The P320 featured in this cleaning tutorial is a full size variant with a Wilson Combat Grip module. I find the Wilson Combat grip to be less bulky than the factory grip. It has more aggressive stippling that aids with coil control. The Wilson Combat grip has a better overall ergonomic feel.
Visit the Skull Crush website for cleaning gear and holsters: skullcrush.com
Пікірлер: 116
🇺🇸Thanks for watching! My Cleaning Gear & Holsters here👇 skullcrush.com
Gun owner for years.. just bought a P320.. i know how to clean guns... thought i'ld look at youtube anyway for suggestions... your Explanations are EXCELLENT! One of the best of tons i've looked at for all my firearms... One suggestion and only one improvement.. i wear latex gloves while cleaning..
Clear, concise, and straight to the point. Well done.
This is a model for how instructional videos should be done. Thank you.
@SkullCrushInc
2 жыл бұрын
That’s a great compliment Nick! Thank you.
Nice video. I do want to make a comment that might help some viewers. When installing the guide rod your comment sounded like it should be obvious which way to install it. Actually, it is a very common problem to install it backwards. In addition, Sig doesn't make it easy because there are at least three different guide rods. I have three in front of me. The guide rod for the full size has a single spring and on mine and yours the breech end has a rectangular dimple in it. Compact and subcompact guide rods have two springs. The end with the double spring is the muzzle end. In addition some guide rods have the round breech end cutaway to have two flats on it. If it has flats the should be vertical so the narrow profile matches the barrel extension. As always, the manual is the best source of information.
Thank you so much. I am looking to buy the Wilson Combat Sig P320. I wanted to make sure it was friendly to clean. I'm an 'ol tomboy and have used my hands a lot. I will be moving forward on my purchase.
Bought mine yesterday and already shot 200 rounds through it Appreciate it
Thanks I didn't realize how easy it was to remove the fire control piece.
Thank you very much for this video! I'm a beginner, and I got my very first gun a few days ago, a P320 M18. I'm so happy with it, thanks for your help!
Great job! Straight to the point, without all the testosterone-laden shit that plagues way too many firearm videos on KZread.
Very good video. Helped me clean my P320 for the first time with no issues. Thank you!!
Thanks! Very helpful. My first clean before first shoot.
Excellent video! I had trouble the 1st time at disassembly and especially at reassembly of my new P320 Equinox , this video was very helpful . As you stated, there are a few tricks that are helpful, many thanks!
Thanks I'm glad you made this I just bought a p320 9mm for my first handgun now gotta learn to take care of it........
@sidneezingara1976
2 жыл бұрын
Just bought my first, also Great video
@user-lr2ez4ny2z
2 жыл бұрын
Did you guys clean/oil yours before breaking it in? Gettin mine Monday
The most professional, description video I've seen . Thank you
Awesome video great instructor, great pace very great instruction as I disassembled, cleaned, and assembled within 1 hour, and everything worked as described!! 5 stars!!
Very informative. Thanks for the video!
good video💯gives every detail needed including how many pads you used n stuff like that, I haven’t seen alot of videos like this
I saw that and fixed it. Then I came across your video and was glad I wasn't the only one who made this mistake at first. Thanks for the video brother.
Maybe THE best cleaning video tutorial I've ever seen!
Thanks for the video, Just picked up a police trade in. I just cleaned it & Love ballistol. Good day.
Great instruction !! I enjoyed the way you took your time to explain & show everything step by step .. Thank You
Thanks Skull, you're crushing it!
Very thorough and helpful video. Thank you sir.
Thanks for the video man. Just got a 320 xfull rxp for my first pistol. Love it. Appreciate the info.
@5trutta
3 жыл бұрын
Congrats! Got a 320 RXP XCompact - first pistol - last week. Completed Basic Handgun Skills course and put my first 100 rounds downrange today. So much nicer than the G19’s I’ve rented.
@carlpettey5651
3 жыл бұрын
Lucky timing as I can't find one now
Nice presentation. Well done!
This made the process so much easier than reading the owner's manual.
@SkullCrushInc
Жыл бұрын
Glad it helped Chris. 👍
BRAVO! Thank you for a CLEAR instructions!
Excellent tutorial
Excellent video!
Very good video - well done - Just purchased a new Sig P320 X-Compact - Really like this pistol -
well detailled and good close ups well done thanks
@SkullCrushInc
3 жыл бұрын
Thank you sir.
Much more through then the sig video. Great vid. 👍🏻
Great tutorial!
Well done! Thank you!
Just added the Wilson combat grip on my M18 😁😏 best thing I've ever done & best gun I've ever owned period 💯💞 .
@SkullCrushInc
4 жыл бұрын
I agree. I feel the same way about the Wilson Combat grip.
@CanikPlease
3 жыл бұрын
Have you thought about changing the slide? Like maybe black wilson grip and like a stainless steel slide. I've been thinking about that
Amazing explanation. Thank you!
@SkullCrushInc
2 жыл бұрын
Thanks for watching Silvano.
Excellent instructional video
Great video! Thank you!!
Most detailed instructions I’ve seen. Thanks
@craiglawrence7576
Жыл бұрын
Go checkout sig guy on the tube for all things SIG. You won’t be disappointed.
Great video thanks for sharing
WOW, that was amazing! Thank You
@SkullCrushInc
Ай бұрын
Thank you!
Liked subscribed and commented just cus of the quality of this video great instructing thank you
nice job! thank you
very helpful thank you!
Good video. Thanks.
Great video, p320 will be my first hand gun I buy.
very helpful thanks
Thank you for the tip
Best video ive seen! Thank you! 13:03
good guide, thanks
Great video! I just bought My first 320(x compact) which was fun to shoot. Not spot on, but I'll get it.
Very helpful, thank you. My model is an X5 Legion, and the recoil spring isn't neatly packed on the rod like this one was. You have to (I assume) feed the loose spring end into the slide assembly and then compress it into place with the rod and then slip that into place against the barrel as shown in the video. Otherwise everything was the same.
Really helpful video, and I am a novice. Last time I took out the FCU, the safety lever pin just dropped out. Fortunately I saw it and slid it back in, although it still doesn't stay in place sometimes when I tip the FCU while outside of the grip module. Could anything have fallen out or gotten out of alignment in the seer housing while the pin was out? The gun dry fires fine but I have not taken it to the range yet. Thanks!
Thank you
I’m subscribing! 👍
@SkullCrushInc
3 жыл бұрын
Thank you sir.
Thanks
14 minutes well spent. 👍
Thank you for making this video and not asking to subscribe to your channel lol. Jokes aside, great video and thank you for the time.
Nice video. This is my 1st time cleaning my Sig and when I assemble it after cleaning the recoil spring guide sticks out a little after I put the slide on. What did I do wrong?
@SkullCrushInc
3 жыл бұрын
Something to do with the recoil spring. Try rotating it and re-instal.
Cleaning my P320 for first time and saw that my Recoil Spring Guide is painted RED for 3/4 inch from top. Not sure what to do? Any advice? I bought the gun a week ago from local place.
@SkullCrushInc
2 жыл бұрын
Nothing wrong with your spring. The factory sometimes color codes the springs so they are easily identified in the assembly line.
what are your fingers made out of. im having so much trouble taking my gun apart
Thank you for the extremely helpful video. It beats the awful manual by a mile. Do you expect this to apply to all P320s in every aspect? Including the X5 legion?
@SkullCrushInc
5 ай бұрын
Yes, all the P320’s are basically the same.
@12gaPunisher
5 ай бұрын
@@SkullCrushInc thank you again. God bless man 🙌🏾
How tough should it be to push the patch through the barrel? I have 2.5” patches and I can’t push them through with the jag. It’s been awhile since I’ve cleaned my gun but it doesn’t have too many rounds through it
@SkullCrushInc
9 ай бұрын
Should be snug but not difficult. Cut the corners off the patch to make it smaller.
@Adam-eats
9 ай бұрын
@@SkullCrushInc I’ll try that next. I use same patches on my Glock and have no issues, but on the sig I either have to force it or it just won’t even go
After how many rounds fired do u think it's okay to clean? I only have 200 rounds through it so far
@SkullCrushInc
3 жыл бұрын
Clean after every use, regardless of rounds fired.
Please tell us about the holster.
@SkullCrushInc
3 жыл бұрын
skullcrush.com
the patches never come out clean out of the barrel. i used the metal brush several times, more than 10. and i used about 100 patches. any ideas why?
@SkullCrushInc
3 ай бұрын
You can try a bore solvent first before the CLP but I think you’re okay. It doesn’t have to be perfect.
@rafaelenriquez354
3 ай бұрын
@@SkullCrushInc thank you
Where did you get the module grip?
@SkullCrushInc
Жыл бұрын
Wilson Combat
So no oil on the fire control assembly?
@SkullCrushInc
2 жыл бұрын
Just clean with CLP. CLP will leave lube residual.
stiff slide catch? came straight here after my first time shooting my new 320 with the txg frame. put about 300 rounds through the gun and when i got home i noticed that the slide catch was impossible to depress and the slingshot method was the only way to send the slide home. did i miss something or is this a common issue?
@SkullCrushInc
3 жыл бұрын
Hard to diagnose without seeing it in person. Call Sig customer service and send it back if needed. Your P320 should be perfect. If not, let Sig fix it.
X compact grip or wilson combat ?
@SkullCrushInc
3 жыл бұрын
AnthonyS This is a full size Wilson Combat grip. Wilson recently came out with an X-Compact version.
@Sauce8451
3 жыл бұрын
@@SkullCrushInc Im asking what would you suggest though? Comfortability wise.
@SkullCrushInc
3 жыл бұрын
AnthonyS Definitely the Wilson Combat.
What brand holster is that?
@SkullCrushInc
3 жыл бұрын
Tara Carter Skull Crush
@taracarter4581
3 жыл бұрын
@@SkullCrushInc after I wrote that I checked out your website and found them! Any future plans on making them light/laser compatible? I have a Sig xcarry 9mm with a tlr 8 that I'm looking around for a nice otw for. That belt loop design is genius! I see you are a veteran and LE owned company as well, do you offer a LE discount? Thank you!!
@SkullCrushInc
3 жыл бұрын
Tara Carter Sorry, but we don’t offer anything for that setup. Thanks
Thank dis is perfect for Cleaning my Gum thank
My disassembly lever is super tight.
@SkullCrushInc
3 жыл бұрын
Jiggle the recoil spring guid rod when the slide is locked back. Sometimes that helps.
@reptileguy8458
3 жыл бұрын
@@SkullCrushInc Thanks I'll try that.
@reptileguy8458
3 жыл бұрын
The nylon brush your using is just a toothbrush right?
@SkullCrushInc
3 жыл бұрын
@@reptileguy8458 Yes, I was waiting on a regular gun cleaning brush to come in at the time I filmed.
@reptileguy8458
3 жыл бұрын
@@SkullCrushInc Why? Looks like the toothbrush works just as good.
I don’t know what I did wrong but now I have no click when i pull the trigger and I followed this video to the T
@SkullCrushInc
2 жыл бұрын
Take it to your local gun shop and have them take a look.
@Austynrox
2 жыл бұрын
@@SkullCrushInc will be going to tomorrow gun smith unfortunately not in today. Thank you
Nice job thanks to the point unlike Biden 😮😮😢