Excellent step-by-step instructions for cleaning the Dyson V7 stick. He gets straight to the point, adding commentary on avoiding damage and safety of parts. He doesn't rush the info and speaks clearly. Excellent, 5-star video.

@lords-electrical

11 ай бұрын

Thank you for your kind words, great to know it was useful for you.

@aidanr9012

7 ай бұрын

Ditto

@bensilverstein9019

4 ай бұрын

My vacuum hadn't been cleaned in 4 years- clear instructions and it runs like new!

This video is excellent. I’m almost 70, have medium tech skills. Had no problem understanding steps. Did have to go buy a torque screwdriver, inexpensive. With the trip to hardware, it took about 75 minutes from start to finish. Dried everything with a blow dryer on low heat and fan. Thank you so much.

@heyheythecat

3 жыл бұрын

I had to give you a like doing this at 70!

@JP-cy1lw

2 жыл бұрын

If you are able to do this outside, in the garden on a breezy day it is much better than doing it inside, especially in the kitchen. That dust is everywhere in the air, and if there was a ray of sunlight entering the room it would illustrate the point I make. Rather than brushing and tapping if you have access to a vacuum cleaner that blows use that, outside of course. The harmful germs in that dust are not good to get into your lungs - dog & cat poo, avian bacteria etc. etc. This is not scaremongering it is common sense. As with sanding wood, do it outside on a breezy day and save your lungs!

This guy explains each Dyson beautifully, straight forward, clear and easy to follow. I have watched all his videos for my Dyson's. No gimmick or silly voices.

@lords-electrical

2 жыл бұрын

Why thanks for the feedback

Thank you so very much for your helpful and very clear instructions.. You just helped a 72 yr old grandma disassemble and reassemble a machine the first time in her life. I love it!!!

@lords-electrical

2 жыл бұрын

Glad it helped

I would suggest just to press on the plastic of the metal screeded shroud so you don't bend the plastic with the flat head screw driver. If you press on the front side were the tab is (where you began to pry with with the flat head) and keep going round until it all unclips I found it worked just as good and without the slight damage.

@jasperallen

Жыл бұрын

Brother, your comment deserves more likes. I made a few minor scratches on the plastic and even one on the shroud itself when trying to pry it open with a flathead screwdriver. I was about to give up. But, I came across your comment...it took a bit of force, but it worked. Thanks so much.

I was worried I may have to replace my vacuum , already! its only about 3 years old. Following your video I have stripped it, cleaned everything and reassembled it, and now it works like a new one. Thank you so much.

@lords-electrical

7 ай бұрын

No problem glad this was helpful for you. Thanks for the great feedback.

Excellent video. I had a pulsating problem in my dyson. I took the filter out and cleaned it thoroughly and the took cap of motor area dry brushed it all out and now works perfectly thanks for the easy steps to follow. Most helpful. I didn’t take mine all apart like you have shown but if I have to will follow your video again to do it. I’m am 75 yrs old and was able,to understand every step that was taken. Thanks for the help !!

Thank you so much! Just cleaned mine watching your video. Important Tip: Adding to everyone else's advice, be sure to assemble the bin to the handle first before pushing in the top portion back in. It makes everything fit better. Also, the clips holding the metal filter are very fragile and higher up than you could imagine. Brush works but I found using compressed air outside is much better.

@chantellechapman4528

Жыл бұрын

Yeah, I stuffed up there, before I came to this channel. 🤦‍♀️🤣

This was one of the most useful and straightforward tutorials I've seen on KZread 👍🏼

Great detailed information. I just cleaned my V7 watching your video. Thank you for all your help! I like the idea of compressed air ( by Jay). I used running water in All plastic parts and let the parts dry really good for half a day. It is working very well. I would do this deep cleaning maybe once in 2 years. Except for the small blue filter.

I used an air compressor that was designed for a pneumatic nailer, worked like a charm and I didn't have to take the unit apart as much as you did. Good video for those that don't have an air compressor.

@uhjyuff2095

Жыл бұрын

change the filter or remove the existing filter from the frame piece and use compressed air to get the dust dirt out of it and the vacuum will work again with good suction!

I love this channel. He explains and shows us step by step, slowly and clearly. Thank you so much!

I'd imagine probably twice a year and monthly for the main skinny filter, just got a v7 and I'm amazed with the performance for a cordless vacuum, well worth the extra money top notch engineering

Thanks very much. I now know T10 and T8 bits to take it apart. I cleaned it up a bit and turned on without it being 100% dry, now have a moldy smell. Need to take it ALL the way apart like you did and clean all the bits and wipe with a slightly damp rag, let dry. Very calming voice.

Excellent video, very clear and easy to follow. I wasn't comfortable removing the outer shroud part so I took that bit out to the garage and blew all the dirt out with the leaf blower. I think it's pretty clean now and then I'll put it back together when the washable parts are dry. Thanks for the lesson!

I had a very bad odour since I bought D7 mattress and cleaning of filters, this has been on going for 6 months , after opening I found baked on dirt which cause bacteria to grow, now fully washed with disinfectant and soapy water internally as long as plastic and stainless steel fully dried I have had no issues now no smelly vacuum, I went one more stage than you and took next internal top apart very dirty in side. Spot on video , straight forward when you know how 🍻👍

Thank you so much! I just got one of these for a hundred bucks used (because the guys' wife got him a fancier one for Christmas) and it was in dire need of a deep cleaning. Everything is drying overnight and then I'll install the wall mount. Thanks again!

Brilliant video. I bought a replacement battery because our V7 Animal kept pulsing and cutting out. Even with the new battery the problem persisted, so I decided to give this a go - right down the getting in at the inner cyclone. And it's fixed the problem! I can send the replacement battery back, and my Dyson is saved from going to the recycling centre. Many thanks!

@lords-electrical

3 жыл бұрын

Thats great to hear well done.

Thank you so much for this excellent video. You take the viewer through all the straps, give clear & succinct instructions, advice on safety measures, at the perfect pace. Your work area is set up well (my dear mother would approve of using the old newspaper on the work surface). This video will help me clean my device & prolong its life which is good for the environment. Thanks again for taking the time to make the video & in turn help others.

This device is from another planet. Amazing physics at work. Fabulous engineering. Japan and England!

Thank you so much for such a good video. I just bought a V7 (other videos made me question my decision ) but after using it I am very happy.

Thank you so much for your video. I bought my V7 18 months ago and had no idea how to clean it all. I have cleaned the blue filter before but didn't know how to take it all apart. Now I need to go out and buy T7 and T8 screwdrivers because I don't have any and nor does hubby in his tool kit.

I just purchased one, still in need of an unboxing. Dyson are unjustifiably expensive, so helping them go the distance is well worth the effort. Many thanks for this very instructive video. Dave Australia

@kassandrawiggum3222

5 жыл бұрын

Trust me the price is worth it. Life changer in our home.

Thank you! This step-by-step tutorial was easy and very helpful.

Followed along step by step and cleaned and reassembled my Dyson V7 in under 20 minutes. Well done!

@lords-electrical

3 жыл бұрын

Great to hear that, thanks for the feedback

I can’t believe how easy this was. Thank you my vacuum was disgusting I just got it a month ago and I’m so glad I found this video I thought I was cleaning it until I saw this. 🙏🏻 many thanks

I've used this video each time I clean the machine. Just did the first cleaning with removing the Torx screws and all. Excellent pictures to get it right! Thanks.

@lords-electrical

2 жыл бұрын

Great thanks for the feedback

OMG it's like a new vacuum. I genuinely didn't think it could make so much difference

@DrJamskii

4 ай бұрын

Did you completely take it apart or just partially?

Excellent video. Clear,concise and easy to understand not like the previous one I have just watched. Excellent.

this actually helped alot (specifically re: putting it back together without breaking it) thank-you!

Me he quedado ACOJONADO del trabajo que ha hecho... Es PERFECTO... Creo que este Señor debe de ser el técnico que desmonta todas las aspiradoras Dyson... UN 10. SUSCRITO...

Thankyou so much for this, I haven't gone as far as the torque screwdrivers as not confident but Dyson is working tonnes better now thanks to you!😄

Excellent video - I managed to follow all of the steps successfully (after borrowing the screwdrivers from my neighbour!). Thank you.

You have explained the cleaning process with so much patience. Very thorough. Thank you.

@lords-electrical

2 жыл бұрын

Thanks for watching!

Thank you so much for providing this information, you made it so easy to disassemble and clean by just following your step by step presentation!

Great video - thank you. I used an air compressor to blow the dust out of the chambers and it was very effective. Make sure you do that outside and wear a mask.

Thank you, KZread You are more helpful than the operating manual provided with the machine.

Thank you so much! Just purchased a new V7 that was distributed before Dyson had bothered to make online instructions available. Representative who told me this could only send me links to KZread videos! Luckily I found yours. Very clear and informative!

@lords-electrical

Жыл бұрын

Glad this was helpful for you. Thanks for the feedback

Thanks! for thorough lesson on cleaning the best vacuum cleaner in the world! I live with messy people, so I moved downstairs and experience the peace & calm that comes with living tidy.

@lords-electrical

Жыл бұрын

No problem, glad it was useful for you.

Just got a second hand V7. This video was really helpful in cleaning the machine. Thank you very much.

Great demonstration that is easy to replicate by watching the video step by step, as you progress through the cleaning and putting it back together. Thank you!

Thanks! You've made this look so simple. However, I am keeping this open while I work. You get an A+++!

The first time I want to give multiple thumbs up. I am on the fence of buying a dyson v7, because they are so expensive. This video helps me make up my mind.

The best video by far on cleaning the Dyson V7. Well done.

Very useful video - got me to 'first base' disassembling the cyclone unit as without it I'd never dare to apply the amount of force it takes to remove the shroud! But having got to the maximum extent of your disassembly why not go all the way? I found that the filter housing simply pulls off the bottom of the cyclone manifold and this reveals four more torx screws (well buried between the cyclones and hidden by dirt). Then there are two more in the air outlet port. Remove these six and the two halves of the manifold come apart. Then the internal parts lift out and the unit is stripped down to components for most thorough cleaning. I think you may have cost Dyson a V11 or even a V15 sale!

Thank you so much! Finally a video that shows how to - really - clean the V7!

@lords-electrical

4 жыл бұрын

Glad it helped!

These instructions are incredibly clear and well presented. Thank you so very much for making this process understandable and as easy as possible.

@lords-electrical

Ай бұрын

No problem. Glad it was helpful for you thanks for the feedback 👍

A very CLEAR presentation. I have no technical skills but found it easy to understand.

Absolutely fantastic tuition, considering I am not technical at all, this was really easy to follow, I wish everything was as easy to follow, well done!

@salmankutay6956

Жыл бұрын

Turkménistan Je t’il encore Turkménistan Turkiye

Perfect tutorial. My 5 year old V7 was very ineffective these days. My wife wanted to buy a new one. I just went through the whole tuto (whith some extra cleanning for the motor head brush) and it's like a brand new one. Thank you.

@uhjyuff2095

Жыл бұрын

did you buy a new filter, because if that has heavy dust the vacuum loses all suction?

Very helpful and easy to follow. I had to pause and start the video often as I did each step. A list of tools I will need would be helpful at the begging of the video. Warning of not getting the contacts wet should come BEFORE he says to rinse the bin.

@penniejackson8479

Жыл бұрын

Agreed, I put mine directly into water. Now it doesn't work. However, I did leave for 2 days to dry. I wonder if my battery is dead, however, it was working before, albeit on/off, on/off constantly despite emptying bin and filter, etc. Any other ideas I could try before I buy a new one?

@atxbee

11 ай бұрын

@@penniejackson8479What happened?

@penniejackson8479

11 ай бұрын

It worked in the end :) @@atxbee

Excellent video! I was able to replace my battery and put it all back together without getting frustrated! Thank you!

Really thorough and simple to follow cleaning instruction. Thank you

Only part I had a difficult time was taking the last piece with the flathead screwdriver but thanks 🙏🏼 hope it smells better when I start cleaning or I’m calling dyson directly ☺️☺️☺️

Excellent video. Really well explained and inspires confidence in me to do mine. Thank you very much!

Watched this a few times over a few years without fail - thanks!

Thank you !! My Dyson 7 now runs better than new. Such a great video. Who knew it got that dirty inside ?

This was very helpful -- except omission of the end HEPA filter--which I have found to be difficult to remove.

Thank you!! We were trying to figure out how to clean our V7 Trigger…found this one…FANTASTIC explanation and video!!!

@lords-electrical

Жыл бұрын

Glad it helped!

Very thorough, easy to follow, and extremely helpful. Now that I've had my v7 vacuum for a little over two years, I an truly say how much I hate it and how much I regret buying it.

@MrSuperdevin

Жыл бұрын

I do agree with you ,this shit is too complicated

@blahblahblahblah2837

Жыл бұрын

@@MrSuperdevin My housemate had a really cheap cordless vacuum that had great suction, great battery life and I could clean the whole thing thoroughly in about 20 minutes with no screws. I just got this V7 today (used) and I can't believe how complicated they've made it. Clearly there's parts here designed to be very fragile so they break and you have to buy a new one

Extremely well made video unlike the extremely complicated Dyson - you shouldn't have to "field strip" a vacuum cleaner in order to . . . clean it! Well done.

@lords-electrical

Ай бұрын

Thanks for this, always like getting feedback like that 😁

Very thorough and helpful thanks, and I laughed at the “squeaky tap noise” subtitle 😁

This video is the best and most informative video I’ve watched on KZread in quite some time. Thank you so much for making it!

@lords-electrical

7 ай бұрын

No problem, glad this was useful for you. Thanks for the great feedback

Thank you for putting this video on KZread. Visually the best way for me to learn how to clean my V7.😊

Great stuff, that saves me pouring over my manual that I can't find. Just one tip, if you soaked that neswspaper and stuck it in the sink it would make your clean up easier and keep the dust down, regards Graham

@claringtone

5 жыл бұрын

This guy lets his wife do the cleanup!

Really helpful video. Thank you. One care point - The outer shroud can get easily damaged when using a flathead screwdriver. I removed mine by flexing the shroud and it came off quite easily.

@user-kc2vi2cl3d

4 жыл бұрын

어떡해🤦‍♀️❤🧡🌷💐

Thanks for the video! Did anyone else find this video as an ASMR trigger? His voice is so relaxing! 😴

Extremely satisfying video! Thank you for helping a stay at home mom in need 👍🏻

@lords-electrical

4 жыл бұрын

Thanks for the great feedback.

Cette vidéo est excellente car elle m'a permise de nettoyer totalement mon aspirateur Dyson V7 en suivant étape par étape le démontage et remontage de l'appareil. Bravo à celui qui l'a mise en ligne.

Brilliant instructor. Thank you. Personally, I use another vac. with some kind of brush head to clean it all. Way quicker. Very little dust.

Thank You. You are the true Lord of the Dyson V7, excellent tutorial.

Thank you so much for this video. I changed the filters as recommended but noticed a lingering smell in the machine. After cleaning it with your instruction back to being like new! Thank you! A shame your shop is so far from me, otherwise i'd pop in for my next electrical purchase!

@lords-electrical

Жыл бұрын

Always great to hear it has helped you, thanks for the feedback

Thank you so much for this quick and easy tutorial. I did everything except remove screws. Maybe next time I'll buy the special driver. Excellent video. 😊

@lords-electrical

Жыл бұрын

Thanks very much for that, glad it was helpful for you.

Thankyou, sorted out my problem, it turned out to be rubbish under the seal, cleaned it out and the seal improved problem over.👏🏻

excellent vid. thanks. thought about taking the crown apart with the 2 screws, but there didn't seem to be much give and it's not worth braking the beast.

A detailed video, very helpful, I thought I would have to replace the battery but after I cleaned all the part it works like new.

@lords-electrical

2 жыл бұрын

Thats great to hear, thanks for the feedback.

Thank you I wanted to clean my vacuum for so long but didn't know how great job. Really DYSON should pay you :)

Fantastic easy to understand instructions, now my Dyson works as new. Thanks very much.

@lords-electrical

6 ай бұрын

That's great to hear, thanks for the great feedback 👍

This was a very informative video clip. Very easy to follow and understand with the step by step instructions. Mine was also filthy inside. Thanks for the help it looks brand new.

@lords-electrical

2 жыл бұрын

Great to hear, thanks for the feedback

Thanks a lot for making this. I didn't make it all the way through - once you got round to removing screws I quit. Why would Dyson make it so difficult to clean the thing? But Ill get to it some day and in the meantime- thanks - it's much cleaner than when I started.

Thank you. My dyson has been having troubles just shutting off even after filters have been cleaned. So we will test it out tomorrow after the parts have dried...😊😊

@lords-electrical

3 жыл бұрын

Good luck!

Good video very useful, DYSON should be paying you for producing such a good job

@annalisa14

5 жыл бұрын

What makes you think they are not ??

@Weakeyedominant

5 жыл бұрын

Dyson would rather you bought a new one when the old one gets glogged up.

@gloriaarevalo6803

4 жыл бұрын

Weak eye dominant Not really! Ii is up to the customer to maintain their appliances in top conditions.

Don't really need it, yet, but this is one I will absolutely come back to. Very well done!

This was so helpful. I have owned my cordless Dyson for at least 4 years. OMG it was disgusting. Thank you now I know how to clean my vacuum.

Great video showing in simple terms what crud gets stuck inside these machines and how to clean it again.

@lords-electrical

2 ай бұрын

Glad to know this was helpful for you, thanks for the feedback 👍

Superb video, ty sir it was very clear and relaxing at the same time. Now it's my turn to clean my own Dyson.

Thanks for making this video. I was able to clean the Dyson in a short amount of time and best of all stress free!

Thank you for this video! I reference it every time I need to deep clean my Dyson. However, I don’t have the Toric (?) screwdrivers. But I can get it pretty clean anyway! I’ll be back for the next cleaning!!

Your video helped me so much. To visually see how to clean the V7 was very useful for me. Thank you. 😊

@lords-electrical

Жыл бұрын

No problem. Glad it was helpful for you 😁

Well after 20 mins of trying to figure out how to put some parts together myself this video saved me from throwing my dyson out the window! Thank you

@lords-electrical

2 жыл бұрын

Glad it was helpful for you, thanks for the feedback

HELL OF A LOT BETTER THAN THE BOOKLET....I WAS DOING THE CLEANING SOOO WRONG. THIS VID IS ALL I NEEDED...THANKS

Wonderful thank you. Hubby bought the DeWalt battery adapter so took the opportunity of stripping it all down. Works like new.

@lords-electrical

6 ай бұрын

That's great to hear thanks for the feedback.

Very good video , but think you should show that the long cylinder filter clips apart as inside in can be heavily blocked and if so your Dyson v7 hoover could still keep pulsing or cause much lower run time , if you just ran it under the tap and left to dry for 24hrs and didn’t clip it apart and clear out the blockage as very common fault for low run times .

Great video, exactly what I needed to be able to clean my Dyson V7. It worked perfectly! Thanks a lot!

@lords-electrical

4 жыл бұрын

You're welcome!

Thank you for the comprehensive tutorial. I was looking for guidance on cleaning the filter on the back of the motor however and it wasn’t addressed in this video. It looks like a small aircleaner and appears to be all one with the plastic piece that comes off the machine. Any tips on cleaning this? Thanks so much

Everything I needed to know - thanks! EDIT: I bought one, partly 'cos of what I saw here, and am well pleased - so thanks again!!

Thank you very much. All back together. Fingers crossed it works a bit better now.

Great video! My V7 Animal Dyson was cutting out every 3 seconds and the battery wouldnt last beyond the upstairs of the home. Only fiddely bit is getting the metal mesh surround off with the flat head screw driver (at 6mins 10 seconds)...where you can void the warranty. I think I bent the plastic and it doesnt fit back as neatly, so suggest youre very careful here. I also didnt know (until this video mentioned it) that you could get replacement batteries, got one on Amazong for £25. Longer lasting and so easy to install. I just did a clean (with the new battery too) and it works like a charm!

@lords-electrical

4 ай бұрын

This is great to hear that it has helped you out. Thanks for the feedback 😊

Very good step by step process. Nicely done. Thumbs up.

Thank you so much. This helped immensely, especially when it came to putting the device back together.

@lords-electrical

3 жыл бұрын

Glead it was helpful, thanks for the feedback