HOW TO CLEAN FOGGY FADED HEADLIGHT on Mazda 2 3 5 6 cx-7 cx-9 cx-5 cx-3
Автокөліктер мен көлік құралдары
HOW TO CLEAN FOGGY FADED HEADLIGHT on Mazda 2 3 5 6 cx-7 cx-9 cx-5 cx-3
If you have Mazda and your headlights are faded, foggy, yellow and you want to polish your headlights and make them shiny and crystal clear like brand new we will show you how to do that. We used wet sandpaper and water to remove the burnt layer off the headlights, they we used a few compounds to make the headlight shiny and crystal clear. If you want to keep your headlights in great shape apply polishing compound every 6 months and they should stay in great shape.
This video may be helpful on:
Mazda 2 Headlights Yellow, Faded, Foggy. Headlight Restoration
Mazda 3 Headlights Yellow, Faded, Foggy. Headlight Restoration
Mazda 5 Headlights Yellow, Faded, Foggy. Headlight Restoration
Mazda 6 Headlights Yellow, Faded, Foggy. Headlight Restoration
Mazda cx-9 Headlights Yellow, Faded, Foggy. Headlight Restoration
Mazda cx-7 Headlights Yellow, Faded, Foggy. Headlight Restoration
Mazda cx-5 Headlights Yellow, Faded, Foggy. Headlight Restoration
Mazda cx-3 Headlights Yellow, Faded, Foggy. Headlight Restoration
Mazda Miata MX-5 Headlights Yellow, Faded, Foggy. Headlight Restoration
Mazda rx8 Headlights Yellow, Faded, Foggy. Headlight Restoration
► Sandpaper Assorted: amzn.to/2nT0H4g
► Sanding Sponge: amzn.to/35w8cyW
► Polisher: amzn.to/2NkjAXZ
► 3M Perfect It Series: amzn.to/2pm7kfM
► Chemical Guys Glossworkz: amzn.to/32nNBLi
► Buffing Pad: amzn.to/31SxwwA
► Microfiber towel: amzn.to/2TND6NO
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmech...
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Electrical Car Repair LIVE is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Electrical Car Repair LIVE, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Electrical Car Repair LIVE.
Пікірлер: 68
⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzread.info/dron/k_lcDzEWLs5fVRYceK3-9Q.html ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
@ryulee458
2 жыл бұрын
Dude I love your videos they're so helpful I'm going to try this for my headlights
@subhanmansoori1542
6 ай бұрын
88pyuyyhkbyjk6t2,
My mechanic told me my headlights were unable to be cleaned, and the entire assembly would need to be replaced. You, my friends, have saved me probably $1,000 after installation and parts costs. Thank you guys!
@beardifulhiker6701
2 жыл бұрын
Sounds like you need a new mechanic
@RGTomoenage11
Жыл бұрын
He a scammer
@BRIANnj1
Жыл бұрын
it depends if its on the inside
Thanks guys! I tried this and it worked!!! My headlights are like new again!
I've always found it helpful to go in one direction with one grade of sandpaper, then the perpendicular direction with the next grade and so on.
Love the accent and the explanation on how to restore your headlights when dirty and nasty looking!
Най-добрият си брат. Живи и здрави!!!
VERY helpful, thank you!
Holy crap, this worked! Thanks man!
Awesome work. Thanks
Amazing Amazing video guys. Thank you this helps so much
Thank you for explaining!
Golden ring was reason for subscription for me.
Can the buffer be rented at Home Depot or someplace else? It's cheaper to replace the headlight covers than buy the tools.
@kcoop99
2 жыл бұрын
Headlights are at least $140 each. Harbor Freight has that tool for $30-40. Compound is another $20. Sandpaper is $5.
@shanethrelfall416
2 жыл бұрын
You can buy new headlights but they’ll go dull after a while anyway sooooo where’s the logic in that? You can rent tools but the buffer is cheap anyway, they’d probably charge you the same amount it costs to buy a used one
Is the 3M compound available at Lowe’s & Home Depot?
Kluci díky moc za všechna videa s CX 7 Nemáte náhodou český kanál. 😅
Can you use magic eraser?
Please confirm wat chemical u used after using the 2000 sand paper. List the 3 for me.
@ericmccolough2482
2 жыл бұрын
Tap the name of the video, all the products are listed there
You need to put a uv coating on at the end, otherwise they will just fade and discolour again. The stuff you use will not do the job, also if you put UV coating on there will be no need to polish every 6 months.
@frankgrimes2991
3 жыл бұрын
Can you please suggest a UV coating I can buy? Maybe something from amazon? Thanks.
@thecongenital3035
3 жыл бұрын
@@frankgrimes2991 clear coat
@STILLNIGHTPEARL
2 жыл бұрын
@@frankgrimes2991 glasweld Gclear is what you want, specifically designed for headlights.
Will this procedure work on any kind of faded headlights
@kiarnastoon6475
11 ай бұрын
Yes
What else can you use besides a buffer machine what kind of cloth
@user-go4wm4cp6h
11 ай бұрын
How to replace brake lines on a Mazda cx7 and replace brake calipers and struts shocks front and back on those three things
@user-go4wm4cp6h
11 ай бұрын
2008
I cleanest the lenses. But it's faded inside the lense.
Easier to work with hood opened and use a smaller pad so you dont hit edges and risk to burn threw cleacoat as theres much less piant on the edges.
@OMGWTFLOLSMH
Жыл бұрын
This was a hack job. I would have pulled the headlight, but yes, at minimum open the hood.
What if I don't have the machine to buff it out?
Now put a UV protective like Sylvania clearcoat for headlights and it will last awhile.
I guess mine was on the inside of the headlight i just dont know what to do
@maxmott7489
4 жыл бұрын
Same here , Inside is the problem,
@cooljool1
4 жыл бұрын
@@maxmott7489 the best way is to replace them unfortunately
@chilledboost1982
3 жыл бұрын
Mazda needs to recall these because they burn and catch fire. Ours melted down it was horrible
@JamesSmith-jn5eo
3 жыл бұрын
I know one thing the regular light sucks I have to use the brights
@sarriszx
3 жыл бұрын
@@chilledboost1982 do you have the xenon ones? Because mine doesn’t have a problem
The X-pattern during sanding has left the chat...
Hi, we love your video. With your permission, we'd like to post this on our social media pages and credit your account. Please feel free to contact us at divya[dot]rawlani[at]ntdtv[dot]org Thank you.
@ElectricalCarRepairLIVE
4 жыл бұрын
The video is copyrighted. I do not permit anyone using it.
@ntdtv
4 жыл бұрын
@@ElectricalCarRepairLIVE Sure, no problem, thank you for letting me know. If there is any change in the future, feel free to contact us. Thank you.
Slow down guys
the problem is that we dont all have the polishing machine to do this. cant we do by hands ? spend a few hundred to buy the machine is not worth it.
@kudalaut.official
2 жыл бұрын
you know its like a no pain no gain kinda issue 🤣
@chadchadchadchadchad
Жыл бұрын
I bought mine today at Harbor Freight for $39.
@CrimsonRayne
Жыл бұрын
You can polish by hand. You can do it without machine but machines are life so much more simple
Brilliant.....My Mazda 3 2012 headlights are exactly the same, at least I know of a cheaper way I can achieve It can be done and by myself... Great video guys....
If you don't clear coat them before polish they will be faded and yellow again within a month or two.
So much easier…. Baking soda and dawn dish soap
@JJ-oo3pg
2 жыл бұрын
Have tried it , if yes how good it works
I hear acetone vapors do it instantly - or is that too dangerous?
GUYS GUYS GUYS! I have a 2013 Mazda two and the headlights are so bad that sometimes it doesn't look like they're on. They no longer feel smooth and glossy when I fun my finger over them. The thing is, I'm terrified of doing this; it sounds like you're just putting scratches in them and making them even more foggy. Even ruining them. Someone reassure me that this is the correct course of action for me. I'M SCAAARED!
@gerardofollano8417
Жыл бұрын
This is very common practice to polish all sorts of plastics, you wet sand and then polish to bring back original shine.
@CrimsonRayne
Жыл бұрын
Theres always a junkyard and get replacements if they look better.
Ouch it will create a crack in the long run... the surface will become thinner because of the sand paper
@spencer2721
4 жыл бұрын
Not at all, all you should be doing is taking away the discoloured UV coating, so should not affect the plastic. Where they are going wrong is not putting a new UV coating on at the end.
@gerardofollano8417
Жыл бұрын
What the hell are you talking about, its 600/1000/2000 wet sanding extremely fine barely removes any material.
@chadchadchadchadchad
Жыл бұрын
@@gerardofollano8417 He means if they do it for like 800 years it will wear through the plastic and create a crack.
@philroberts1500
9 ай бұрын
If in doubt don't follow the advice and buy and fit new headlights whenever, or saving yourself the hassle.