Seems like everyone's mice stopped working during this quarantine lol

@Jaybon

4 жыл бұрын

LOL!

@tautvydas7326

3 жыл бұрын

@@Jaybon the problem is my mouse gets stuck like i release my finger and the click stays there :/

@ImZubbly

3 жыл бұрын

@@tautvydas7326 exactly, thats what's happening to mine at the moment and Idk what to do except buying a new mouse

@windowsxpprofessional

3 жыл бұрын

Both of you clean the internals using wd 40 or sandpaper

@condorX2

Жыл бұрын

Because people cheap mouse 🤓

Minecraft Pvpers: **Nervous Sweating**

@theopskeletonz9163

3 жыл бұрын

Ye i fucked my kain 100 LOL

@zkvn

3 жыл бұрын

@@theopskeletonz9163 my model d is dying slowly

@QNAS1

3 жыл бұрын

Fucking block hits instead of normal hits

@zkvn

3 жыл бұрын

@Brody Powellu a jitter clicker?

@zkvn

3 жыл бұрын

@Brody Powell y e s

This kind of small engineering makes a big difference in others life, that is exactly what i was looking for bro...

@Jaybon

5 жыл бұрын

I'm glad I was able to help you bro Dinesh! Thanks!

The start of the video was LITERALLY ME when my button was stiff LOL

@Jaybon

5 жыл бұрын

I do that all the time haha

thought i've lost the left mouse click there for a sec... looked at the 2nd one to figure out the mech... word of advice: DO NOT TAKE the coper thin metal thingy off, it's just not worth it. Clean as you can, it can be just dust in there

@Lemonademan

3 жыл бұрын

I removed it and now im struggling to put it back lol

@WeMustSecureABetterTomorrow

3 жыл бұрын

I've made a lot of mistakes in my life, but if I could go back and change any of them, it would easily be this.

@cattysplat

3 жыл бұрын

@@Lemonademan I bent mine trying to put it back together. Now it will never click. Might as well just buy new mouse or replace the switch.

Thank you so much!! I ended up nearly butchering the copper sheet but it all worked out in the end :D Fixing my mouse this easily felt really good!

@unknownuser8454

Жыл бұрын

"this easily"

Your Gollum cameo had me dying ! It's exactly how I will look when I try this X D Thanks for the great vid, I had no idea how i would be able to open these switches. I thought it would break if i tried.

@Jaybon

3 жыл бұрын

Same here, Lu! Hahaha

I have the original razer abyssus, still works but the right click is feeling a bit stiff, pretty sure it uses the same mechanism so might have to give this a try (especially given that it now cost $100 Australian, compared to $35 when I bought it in 2013)

I fixed my favourite Logitech MX mouse with these instructions. Thank you. Somebody online once told me that the capacitor in the mouse was faulty, and I had to buy it on eBay to replace it. Turns out it wasn't true, until these instructions showed me how to fix it.

I’ve Been looking for a working video for a while. Thanks!

This is the greatest editing on a KZread video I've ever seen, great job!!

Me a Minecraft player who mouse abuses : laughing for clicking 40 clicks per second

@scientistmiles

3 жыл бұрын

so my razor viper mini left button fell off can you help

@dragnify7456

3 жыл бұрын

@@scientistmiles yes so what's u do is you try to just plug it back and if it clicks it's ok otherwise buy a new one

@scientistmiles

3 жыл бұрын

@@dragnify7456 ok

@DeezNuts-jn8gr

3 жыл бұрын

I play minecraft bedwars a lot and pass this video

Great video, explained well since step 1 and I had an easy time :)

@Jaybon

4 жыл бұрын

I'm glad you liked it. Thank you, David.

This actually worked. The copper piece wasn't even black like yours, but remounting did the trick.

@Jaybon

4 жыл бұрын

That's good to hear, bro Guilherme.

Thank you, my mouse works again. Tip 1: before opening the little case, place a small piece of sticky tape onto the little case. This prevents the small white little plastic piece from flying away never to be found again. Tip 2: consider cleaning the metal sheet without extracting it. It seems it's not always necessary, or desirable, to extract it.

@Jaybon

3 жыл бұрын

You're welcome! I'm glad you managed to fix your mouse. Thanks for the tips as well.

@Dr.CandanEsin

2 жыл бұрын

Taping from the top side also helped me to reassemble the case easily. Thank you!

@husher5142

Жыл бұрын

This reminds me of the first time i put a square bracket into the racks. 10 points for the fling lol

Thanks mate! You helped me fix my mouse instead of having to buy a new one :-D

@Jaybon

3 жыл бұрын

You're welcome, Filipe! I'm glad you managed to fix your mouse! Thanks for supporting my channel!

Immediately after watching this vid my mouse somehow got fixed without me doing anything :p

@Jaybon

4 жыл бұрын

Ahahahah!

@ttvhomiep8576

4 жыл бұрын

My mouse is messed up my side button won’t press as smooth as my other side button any tips

@blainehunter9264

4 жыл бұрын

Lol me too

@hariskhan-yh4jl

4 жыл бұрын

Odin is with u

@catchy9931

3 жыл бұрын

The hey dood, the same thing happened, i just started the vid and my mouse got fixed

I have fixed this same problem with a drop or two of IPA (isopropyl alcohol) on the bad button while keeping it depressed to allow the IPA to get inside and clean the contacts by cycling the button.

@Jaybon

3 жыл бұрын

I'm glad you managed to fix your mouse, A Alborz.

Thank you for this video. Exactly what I needed. Fixed my ROG mouse. Hopefully good for another 3 years

@Jaybon

3 жыл бұрын

I'm glad you managed to fix your precious mouse! Happy Holidays!

Thanks for the nice video and a 2nd lease of life for my mouse. The critical part is getting the copper plate back in its place. If anyone is having issue with that part just remember that both middle and front contact points have two steps and the plate needs to be on the first step in both of them. Just pop open the other side switch for reference and you will get it.

@Jaybon

3 жыл бұрын

I'm glad you managed to give your mouse its 2nd lease (the same is true for your future mouse)!

GOD BLESS YOU, SERIOUSLY, I WAS TRYING TO FIGURE THIS OUT FOR 4 HOURS AND IT FINNALY WORKED, THANK YOU SO MUCH.

Observations on Logitech Nano optical mouse: 1- at 2:30- The reference to removal of 'cap' seems to imply the small tabs can be pushed in to unlock the top. In my case the tabs are attached to the base and would not move. I used a straight pin to pry out the corresponding 'ears' of the top outward to unlock/remove the top. 2- A caution, the small foil is easily bent if cleaning is not done very carefully. 3- The small curved portion of the foil holds it in tension and is the main actuator for proper actuation of the button. If over done, you have a hard time getting it back to correct tension. 4- cleaning the contact points in the base with a steel screwdriver took the copper plating off the contacts AND damaged the small grooves that the copper foil sits in. Thanks for the video!

this definitely helped me. I bet if i brought the mouse to PC service store , they would tell me "it doesn't pays off to repair it, just buy a new one" or "we don't do that"... Thanks to this guy's tutorial, my left click works normally again.

@Jaybon

4 жыл бұрын

I'm glad you managed to fix your mouse, bro.

@astrotecn

3 жыл бұрын

yeah it doesnt pay off for them

Ended up pulling the switch out of the circuit board trying to lever the switch open. It also pulled the solder pad off, so there is no way I can solder it back on. Basically wrecked my mouse completely. Also damaged the catch on the switch so it doesn't close fully. Trying to repair a heavily used switch is kind of a waste of time, as the metal is already weakened, it will soon bend and produced weak/no clicks soon enough. Much more sensible is buying quality replacement mouse switches (most switches in computer mice today are cheap crap), unsolder, replace and solder with new switch, then you have a switch that will last almost forever.

He looks a bit like Jackie Chan Edit : your watching this to play fortnite lol 😂👊❤

@jahhbucks

5 жыл бұрын

every asian does

@Tassos_Chatz

4 жыл бұрын

@@jahhbucks racist but good

@erdstjova

4 жыл бұрын

I thought it was on the thumbnail 🤣

@ignfroggy9417

4 жыл бұрын

jah hah not me

Thanks so much. I didn't have to remove the copper plate, but now my mouse is working much better.

i love how informative your videos especially in the first part of the vid.

@Jaybon

3 жыл бұрын

I'm glad you liked it, Aldriniel! Please stay tuned if you want to see a video on how to fix a mechanical keyboard key/s. Thanks for supporting my tiny channel! :)

this was awesome, what's the best way to put the little pads back on at the end tho? what kind of adhesive do i need for that?

@Jaybon

4 жыл бұрын

Hello, Bishop! You may use a regular double-sided tape.

I've got a razer naga molten mouse, the thing is it does not double click but i am having troubling clicking it. it seems that it has become heavy and hard to click "softly" unless i apply more pressure for it to click. what can i do in that case? is it broken? or is there dirt? fixable? Dont want to throw it away, really love this mouse and helps me a lot in MMO games.

Is there a regular liquid/solution that you'd recommend to clean the carbon build up on the copper clickers?

Hi, did you put back the black thingy in the mouse? the one that left a yellow thing i dont know what its called but its in 2:00

Hello Bro, its me again. I had issues with the Rival 600 and you found a solution for me. I am not sure if you remember me though. I got a new mouse its a Glorious Model O and the Left click is feeling sticky, alot of people had this issue on youtube, reddit and so on. I was wondering if i do what you did on this video if it would fix. I researched but couldnt get any answers i was wondering if you could research more deeply for me and try to get a solution. Thank You! Have a good week

Thank you for great video with the manual for repair mouse button! I repeated everything from your video and my left click button become clear. There is no miss clicks anymore! I have Razer Deathadder, 3 years old, sc2 play. And don't forget to smile =)

@Jaybon

3 жыл бұрын

добро пожаловать, товарищ!

Thank you a lot ! ! ! I was upset cuz my left click was messed and i couldn't holding the input click while was moving the mouse even though i was holding the button. A quirky 'miss click' issue. It took me a lot to put that copper tool and when i did, it didn't sound but works. When i proved the click, i was and i am fascinated, now my mouse ( at least my left click xD ) feels like a expensive one, the sensibility is high and i'm more comfortable with it. Thank you again :).

@Jaybon

4 жыл бұрын

You're welcome. I'm glad you managed to fix your mouse, Caelestis!

I need help with re installing the copper strip. I made the mistake of removing both of them at the same time and I can’t figure out which one are they supposed to go on. I tried many ways to install them but I can never get the click sound you mentioned and I can never seem to install them in a way that they are not loose. Are they all supposed to go in the same way in all mice? I have the razer deathadder chroma. Thanks in advance

I had problems when dragging windows, often dropped while moving my hand. I opened the micro-switch, cleaned a bit with alcohol and what this video shows and now works perfectly. Thanks.

Perfect video. My mouse right click button was working less than half the time I clicked it. About 2 out of 10 clicks would actually register. After cleaning that little copper spring and coupling everything back properly, it worked flawlessly like a charm. 10/10 video. Worked for my 6-button gaming mouse.

@unknownuser8454

Жыл бұрын

flexing on wasting money on a mouse

@chibu3972

Жыл бұрын

@@unknownuser8454 actually it was a hand out from my older brother who found it at a junkyard for like 10 bucks but stay mad ig

A very good guide. But be extremely careful with that small copper clip. I broke it and then had to use my copper clip of middle click button ones to fix it.

@Jaybon

2 жыл бұрын

Thanks and thanks for the tip, Batman!

thank you man, just fixed my mouse. didnt go to the extend of your video but i guess the dust on the surface was the issue. thanks again!

Whoaa it's working again! It gets more silent though, i dont know if its good or not but i dont need to buy a new one. Thank you

@Jaybon

3 жыл бұрын

You're welcome! :) I'm glad you managed to fix your mouse, Sugarin!!! :)

Wow, thanks. That worked really easy with your help and even though it wasnt the same mouse and mine had a completly different mechanical layout it was really easy to figure out what was what with a little bit of brainwork.. thank you very mutch that saved me money..

Just fixed my mouse!!! Couldn´t make it do the actual click but al least it works!! Thanks a lot!

@Jaybon

4 жыл бұрын

You're welcome! I'm glad that I managed to help you.

I was going to buy a new mouse, until I saw your video you saved me

Thank you, your tutorial really helped me!!, my mouse comes back to life 😁

mine's not faulty, I just wanted to see the configuration of that little bronze spring piece. thanks! been kicking my own butt trying to figure out how to put it back on pr operly without it flailing, and to make it click properly. I have ordered some new omron switches, (I've never soldered, I plan to take the spring out) since one of them ripped. Again, Thanks for the tutorial. My mouse is a Razer Naga Chroma incase you had any tips for me, which I'd appreciate it, not sure if the mouse is 2014 or a bit earlier, but it is wired too.

@Jaybon

4 жыл бұрын

Hello, Lyle. You're a welcome. If you are using Razer, I'm pretty sure that it uses Omron switches that has a thicker and wider copper / Bronze spring piece. I learned about it when my I tried to replace the spring piece of my Razer Naga. I had several Razer products in the past and honestly speaking, based on experience, they easily breaks (Mouse and Keyboard compared to Thermaltake or Logitech. :(

@rados1aw

4 жыл бұрын

@@Jaybon My razer deathadder sometimes doesn't configure me clicking the mouse 1 button. As a last resort I am planning to see if I can fix it

@Jaybon

4 жыл бұрын

I strongly suggest that you do this method first before getting a new one. I hope and I pray that it will solve the problem.

Nice video! Btw you look like Jackie Chan lol

Effective and It took me more than 3 and half hours but it was Worth it

You don't really need to remove the contact piece entirely if you got WD40.

Thank you for helping out. I managed to fix my mouse and it works like a charm. Took me 2 hours to put that damn copper spring back but it's my first time so it's all good.

@Jaybon

4 жыл бұрын

I'm glad you managed to fix your mouse! Congrats!

that you very much friend! you saved my mouse and also my money!😊

@Jaybon

4 жыл бұрын

You're welcome, Abhijit!

Me plays Minecraft Also my mouse disconnects when I'm about to get killed Me: ........

Gracias!!! Excelente video! Arreglé mi mouse TT black gracias a ti!

@Jaybon

4 жыл бұрын

¡De nada! Patricio!

Bro my mouse adx m0318 was perfect nd today i woke up nd it started doing freakin 18 cps clicks from 1 click on mc nd i play fn not mc any fix?

Worked for me ! Thanks 👍

Thank you so much brother , you saved me from buying another mouse however the copper sheath part was quite annoying and I have a Logitech mouse so it was a different setup but bro you got me fixed 10/10

1:22 Minecraft goes CRCRCRCRCRCRCDCR

minecraft:20 clicks in 1 sec

@el_khanez5017

3 жыл бұрын

that's why im here ahahah

@karido4974

3 жыл бұрын

@@el_khanez5017 same

Thank you so much! :D

Thanks, this worked with my Logitech G203.

@Jaybon

4 жыл бұрын

You're welcome, Zen. I'm glad you managed to fix your mice.

My problem is my miniso wireless mouse fell and i need to really click it hard for it to work especially the right click. Should I do this too?

I needed this, i broke mine from hitting 34 cps and it broke Yes btw dragclicking :weary:

@Jaybon

3 жыл бұрын

34 cps!!! (O_O)

@Jeremehhh

3 жыл бұрын

@@Jaybon also my mouse is fixeddd thanks to you!! Salamat kuyaa

I clicked like with my fixed mouse button, thank you! (I found that its better not to bend the lil clicker piece like shown, but rather, make sure it is straight and the little tab is not bent down too far, tried it both ways, got much better audible click from the second way.)

Nice! My mouse is fixed. Now I can finally Skye dog in peace..

Thank you mate...opening the button box was the missing piece of my cleaning operation.

Thanks, A lot Man! left a like....my forking mouse right-click was getting triggered at the same time..when i was clicking left ....NOW its working fine after this trick! Cheers!

i only have a basic screwdriver. is there any hope for my mouse?

@Jaybon

4 жыл бұрын

Hi, CheapDoggo. If you don't have a tiny flat screw, you need to improvise. Try using a pin or a needle to unlatch the housing of the mouse click. ;)

Me: Jackie Chan in the thumbnail......

@Jaybon

3 жыл бұрын

I get that a lot Maheep! Heheh

Heyy, thank you so much! You helped me fix my broken mouse button :)

do u know how to make ur alcatroz gaming mouse not get stuck because im using it and it wont work is it becasue of mouse pad?

Thanks fixed the issue :) I got lucky with putting the small piece of metal back to its place

@Jaybon

3 жыл бұрын

You're welcome! I'm glad you managed to fix your mouse, Mist! I got some tips in one of the comments (Land.on.off Mars) which can make your life easier next time. Tip 1: before opening the little case, place a small piece of sticky tape onto the little case. This prevents the small white little plastic piece from flying away never to be found again. Tip 2: consider cleaning the metal sheet without extracting it. It seems it's not always necessary, or desirable, to extract it.

omg i love you i had this mouse for ages and it broke awhile back and i have been using like a 1996 microsoft mouse xD and after 2 hours of trying to get that little metal thing back on i fixed the mouse my cps is already high tysm

@Jaybon

4 жыл бұрын

I'm glad you managed to fix your mouse! Congrats, Halansi!

@Yu-yn2en

4 жыл бұрын

Literally 2 hours man ! x'D

@smokked

4 жыл бұрын

@@Yu-yn2en yes.....

And this is minecraft pvp: *shows 40 clicks per second*

dude i just fix my old mouse and my current mouse that are always double clicking now i have two mouse hahahaha thanks man

You're a damn life saver bro,thanks a lot!!!

Does this work with a logitech g502 hero?

Thx bro! 😃

@Jaybon

5 жыл бұрын

You're welcome bro Dso-Izso!

4:02 first put the bottom, then the top, and at the end, push the mid. This way worked for me. Thanks a lot for the tutorial! :)

@Marvin-wg8ho

3 жыл бұрын

Can you tell me well how to put the chopper? I didn't understand

@Jaybon

3 жыл бұрын

You're welcome and thank you so much for the tip, Greeneye!

@Jaybon

3 жыл бұрын

Hi, Marvin! It's difficult to explain it using words but Greeneye's instruction is a good one!

@Aalokk

2 жыл бұрын

Damn it.. was struggling for so long. This comment helped. Thanks Man

you Jay I have a Garuda Gear Hawk 1 mouse I don`t know how to dismantle the mouse to repair loose clicking it has magnets can you teach me how?

1:51 that's a +12 epic legendary brush right there newbs

thank you bro you helped me

@Jaybon

3 жыл бұрын

You're welcome and It's a pleasure to help! Thanks for supporting my channel as well!

Seems to have worked. Now I know how to fix mice buttons if the button-action part still works properly. Thank you!

@Jaybon

5 жыл бұрын

You're welcome! :)

this saved me money from having to buy a new mouse

@Jaybon

3 жыл бұрын

I'm glad you managed to fix your mouse, Droganachi!

i liked the video. informative. however theres just one thing that makes it unclear if this would fix my problem, my buttons dont miss a click. the failure they have is that i get double clicks when i only click onse. so i am not sure this would fix that problem or not.

@Jaybon

5 жыл бұрын

Thanks for appreciating this video tuga2112. Regarding your question, I believe cleaning and adjusting the tiny copper thing will solve the problem. I suggest that you give it a shot and let us know if it will solve the problem so you can help future viewers with the same concern. Thanks!

Took the copper thing out, bent a lot had to reshape it, managed to get it clicking slightly and put it back on it's working normally just hope I don't have to mess with it again soon that thing is annoying.

i just fidgeted with the copper part, and it worked

@Jaybon

4 жыл бұрын

I'm glad it worked, bro!

Redragon m901 perdition 24000dpi mouse kept triple clicking, so I tried this. Ended up slicing my finger open with a knife trying to open the black click box, which was impossible to open. Somehow managed to get it open and spent 2 hours fiddling with the copper plate. Put it back in wrong, then put the box back together. Had to try opening it again and the small white piece got launched into the unknown. Spent another hour searching for it on a white carpet, but couldn't find it. Patience ran thin and ended up raging and smashing the mouse, knowing it was worthless without the white piece. Battery broke open and got in my cut, finger starts burning. Now I need a new mouse.

Is it safe to just use water to clean them or do you also need to take them apart to clean them?

how u get thr copperpics bac on bro

great advices, thank man!

@Jaybon

8 ай бұрын

You're welcome! Happy to help!

when did Jackie Chan start doing tech tips?😋

high quality video, unfortunate it doesn't have that much recognision

@Jaybon

5 жыл бұрын

Thanks for the complement ByCoolPumpkin YT

@dimitrypilin3098

4 жыл бұрын

I was going to say the same. I was going to replace the button altogether but will try this instead. Thanks!

I don't have grease , will it still work

@Jaybon

5 жыл бұрын

Yes it will still work.

bro I thought you were jackie chan in the thumbnail. lol

@Jaybon

3 жыл бұрын

Ahahahahaha I get that A LOT bro!

Thanks!! It worked for me

@Jaybon

3 жыл бұрын

You're welcome. I'm glad you managed to fix your mouse. Thanks for the support, Alex!

My mouse has been unusable for almost a year now, I rubbed the black stuff off... and now it works.. It's a miracle!

Hello sir! I just watched this video hoping that it would help me but it didnt really have any connections to my problems so. I was just gonna ask for help with my wireless mouse, so basically when i move my mouse to the right it goes down and when i move it to the left it then goes up. I really hope that you can help me because im not really an expert when it comes to these types of situations

because of COVID pandemic and lock-down I have no choice but to fix the mouse myself and this helps a lot dude :) hahaha logitech g300s back to production though I have lost the white plastic PIN but it was easy when I have broken mouse around those generic gaming mouse and use those plastic PIN to replace my lost original pin though at first it didn't work but just a bit of a tweak and it should work :) yahooo. note the problem of my mouse is double-click and when you drag the windows folder it loses sometimes so a lot of problem. well it is fix now. thanks dude!

@Jaybon

4 жыл бұрын

Congrats, bro! I'm glad you managed to fix your mouse!

@pawpotsRS

4 жыл бұрын

@@Jaybon 1000% working though It took me half hour to fix this mess up mouse glad the operation went well despite of some missing pieces luckily to have some spare. thank you bro and take care!

@Jaybon

4 жыл бұрын

@@pawpotsRS you're welcome. Stay safe!

I keep having a weird gap between the click and the pressing, the button felt loose, i opened the mouse and placed a tape piece on each clicker and closed the mouse, now it feels like new again

Does this also fix a hard click ? My right click needs a hard click to trigger it it annoys me when i play

what if the middle bar on the copper sheet is split in half?

@Jaybon

4 жыл бұрын

RIP to that copper sheet then :(

@skellythespookyskeleton

4 жыл бұрын

@@Jaybon well i guess it time for a new mouse then :D

@Jaybon

4 жыл бұрын

@@skellythespookyskeleton if you know how to solder there is still a way to fix it.