Amazon USA/Can/Europe - amzn.to/36FLfyF UK - amzn.to/35kzRI1 Shavers @ Banggood - www.banggood.com/custlink/vmGhNqWnDm You can support the channel if you buy items off the Amazon links or via Patreon - www.patreon.com/mrbazreviews

After spending a good half an hour sat on the toilet next to the sink trying to figure out how to put these back in place. Giving up leaving it 3 weeks before consulting the university of KZread. I thank you sir. Your legacy lives on

@MrBazReviews

5 ай бұрын

That's great glad it helped! Yes can be tricky at times. Some keep the cutters matched to the foils but it doesn't matter IMO

For a boy who's dad isn't around. This is very helpful and simple tutorial!

@MrBazReviews

Жыл бұрын

Glad it helped

@GinaMazzola

Жыл бұрын

Sending you a hug after reading your comment.

@kitjasabsgabs1830

Жыл бұрын

Idk about dad or not but I will say I know ppl with parents and they can't have a bowel movement without parents. I'm damn proud of ya. I'm lucky to have my dad teach me at a young age it's good to know a lil bit bout most things than the most about 1 thing.

This was exactly what i was searching for. Thank You!

@MrBazReviews

3 жыл бұрын

Glad I could help! Thanks for the comment

Thanks for that pal, mine fell apart while tapping over the bin cleaning it and I thought I’d lost a bit in the middle until I seen you turn it, brilliant!!

@MrBazReviews

10 ай бұрын

No problem 👍 Glad it helped in this emergency!

Thanks man, I was too dumb to figure out putting it back together.

@MrBazReviews

2 жыл бұрын

No problem

A very informative video with step by step instructions, a job well done!

@MrBazReviews

Жыл бұрын

Thanks appreciate that

Thank you very much, I searched for this video for how to install Philips machine parts because they broke up with me by mistake, your explanation is clearer than the instruction manual. ❤😂

@MrBazReviews

Жыл бұрын

Not a problem !

By the time I found out how to deep clean my shaver like in this video, the hair residue that stuck in the blades for years has become sentient and I had to fight it off with torch.

@MrBazReviews

2 жыл бұрын

I blast it every month or so with hot water, helps reduce any build up

@chevyguy6961

Жыл бұрын

I clean my 8240XL's combs and cutters weekly when it's in use. It doesn't take long for the buildup to happen when you shave daily. The first time my shaves took longer and I thought the blades needed sharpening. Nope, just a good cleaning 😊

I tried to use this for body shave, just on a small portion to see if it works. It worked but then it needed deep cleaning, the video was very useful. Thanks

@MrBazReviews

10 ай бұрын

No problem it's not really a body shaver but knock yourself out!

thank you brother. I was playing around with my brothers shaver and the whole thing came undone, gave up on trying to assemble it myself so I came here. :D

@MrBazReviews

Жыл бұрын

Not a problem glad it helped

look bro you just saved me , mine just get disassembled for no reason and i though it's broken i was about to throw it away but i did a search on KZread and your video showed up and yeah i fixed it 😁 thank you 😍

@MrBazReviews

Жыл бұрын

No problem it's simple enough some match the cutters and foils and keep them the same, I've never found a problem mixing them up myself.

@thecatguy

Жыл бұрын

@@MrBazReviews thanks my friend

Was exactly what I was looking for, thank you.

@MrBazReviews

Жыл бұрын

Glad I could help!

Most useful as I just got one! Many thanks.

@MrBazReviews

2 жыл бұрын

Not a problem!

Thanks for this, a friend dropped his & it was like a puzzle getting it back together. Your tutorial taught me how to lock everything at the end so hopefully when he drops it again it won’t all fall to pieces!

@MrBazReviews

Жыл бұрын

Great to hear! Yes accidents do happen

excellent video, easy to follow. thank you.

@MrBazReviews

6 ай бұрын

Glad it helped thanks for the comment

Very helpful thank you Mr Baz you are a gentleman and a scholar

@MrBazReviews

Жыл бұрын

So they say!

Great review you explained it so well I was on the verge of giving up and throwing the electric razor in the bin.

@MrBazReviews

4 ай бұрын

Glad it helped you, it can be annoying yes!

Brilliant explanation, thank you so much!!

@MrBazReviews

3 жыл бұрын

Glad it was helpful!

Really helpful I wanted to clean it opened it then panicked because I didn’t know how to put it back in together and then saw this video thanks

@MrBazReviews

Жыл бұрын

No worries!

Hi. Philips Shaver works! Thank you so much!

@MrBazReviews

Жыл бұрын

Great to hear! It's fairly easy to keep clean

Hello, I have a question I was using my machine and as I was using it only 1 blade stated spinning.... so i followed what you did to see if i can fix it but still only one blade spins, any advice?

@MrBazReviews

3 жыл бұрын

Make sure all 3 blades are seated properly the should just drop in, and the cage also just slots over no pressure is required (make sure you tighten the cage up as shown)

This helped immensely when I was first attempting to clean the shaver heads. It made a huge difference in the quality of the shave. But after a time, it did not seem to fully handle the cleaning. There was a gunky residue building up in the heads. (I'm thinking this is due to the use of electric shave before shaving.) I found running a q-tip just around the edges remove that nicely. I used a can of compressed air on the main part not shown in the video to make it "factory fresh". However, today used a brush there and am in a pickle now. Somehow, i dislodged the front latch. I managed to reinsert it, but it wont hold the cover down now. I discovered a tiny spring had also come off. Any ideas on how to get that back to working order so it stays latched?

@MrBazReviews

6 ай бұрын

My latch broke there is a small plastic part which holds it in place which came off. I had to claim a warranty replacement from Philips because you can't use the shaver (well you can sort of if you push it down!) You might have the same issue, the spring is just there to push it out, if it's broken then the plastic tab will keep falling out. To be fair to the company I did get a replacement from them (same model) the warranty is 2 years. I would check that to see if it's broken or not.

Thank you very much. A simple guide to clean and reassemble the shaver. Appreciate it very much. Cheers

@MrBazReviews

3 жыл бұрын

No problem 👍

THANK YOU OMG ! YOU SAVED MY DAY

@MrBazReviews

2 жыл бұрын

Glad it helped! Thanks for the comment!

Thanks so much, I kept trying to put it in but flipped the final part the wrong way and it didn’t work.

@MrBazReviews

2 жыл бұрын

Not a problem!

cheers mate I had dropped the razor and it was in bits scratching my head for a bit thanks again

@MrBazReviews

Жыл бұрын

Not a problem lot of people done that!

Absolute legend. Thank you!

@MrBazReviews

Жыл бұрын

I try thanks!

Thank you it came in VERY handy

@MrBazReviews

4 ай бұрын

Not a problem

Very helpful. Many thanks.

@MrBazReviews

3 жыл бұрын

No worries! Thanks for the comment

Hi there, quick question, my shaver is assembled as you have shown, but for some reason when I apply force onto, it just stops working. Any way to fix this Sir?

@MrBazReviews

3 жыл бұрын

It can't be in correctly otherwise it wouldn't jam up. I'd take it off again and try it again. Parts just slip in, no force, the cage that lines up with the slots

@DNCYN

3 жыл бұрын

@@MrBazReviews mine is the Philips shaver 1000, I’ve tried again and again but it still gets jammed, even after I’ve properly cleaned it, I’ll get a replacement but thank you for your help🙏🏾

Thank you so much for this video 🙂

@MrBazReviews

2 жыл бұрын

Not a problem!

My shaver doesn't have the tabs on the foils, and whenever I put it back together the foils can't move. It's a Phillips Series 3000 and looks like the one in the video, so I am not sure on what I am doing wrong

@MrBazReviews

2 жыл бұрын

I've not seen one without tabs. The foils fit in place, if they are not seated then it should be obvious, try rotating them around again. The cutters fit behind the foils, the cutters move the top foil is stationary. .They do not contact each other

many thanks. I have this model but it's an older one. I was always wondering how to clean it. thank you very much

@MrBazReviews

3 жыл бұрын

No problem, doesn't need doing often maybe every month or two

You are fantastic. Thank you!

@MrBazReviews

2 жыл бұрын

Happy to help!

How do you clean the sideburn trimmer?

@MrBazReviews

3 ай бұрын

Just wash it off or brush it clean

How to clean the coupler part area which made the Blades work

@MrBazReviews

8 күн бұрын

Old toothbrush works quite well, secret is to let it soak for a while and it's easier to clean.

Great video

@MrBazReviews

2 жыл бұрын

Thanks! I try my best

How to clean the other side where the hairs fall in? Is it water proof?

@MrBazReviews

Жыл бұрын

You can wash it, it is water proof. The battery area and case is fully sealed

I have the 3000, but this is the first time to use an electric shaver. When I turn it on, it has a very soft pitch sound. Most of the shavers I see being used have a high pitch sound. Is this normal for the 3000? Please advise.

@MrBazReviews

2 жыл бұрын

Sounds normal to me, it is a fairly quiet shaver compared to some

@stewarthilbmann915

2 жыл бұрын

@@MrBazReviews Thank you, I was concerned. since it was so low of a pitch. Take care.

i got the series 3000 & while clearing it out the little button that release the flip top lid came out along with a spring it doesnt look broken but I was wondering are you able to tell me how to put the the button back on with the spring if at all possible (please) ?

@MrBazReviews

4 ай бұрын

This happened to mine, there is a tab that breaks and it won't stay in. I got a warranty replacement from Philips. If you push it back and it comes out again, then it's broken. Only option is to hold the head in place when shaving!

@danielburgess1113

4 ай бұрын

yeah any genius ideas on how to maybe bodge it so the head stays on but is still useable without having to hold it in place ?@@MrBazReviews

@danielburgess1113

4 ай бұрын

any ideas on how to bodge fix it so i can use it without having to hold it in place ?@@MrBazReviews

@MrBazReviews

4 ай бұрын

@@danielburgess1113 I didn't find a way to do it, you can't glue it as it stops you from opening up the head. It will still work if you hold it to your face, well sort of. Seems to be a weak point on the design, though this one is alright so far

TIPS: HQ9 Shave heads fits perfectly in other philips shavers as well. Using them in my s3110, had the same ones to my old shaver that had two shavers instead of 3, and a removable head, so it seems like all philips heads are the same. Dunno if it actually makes a difference, but 3 rings instead of 1 must do something. Bought em cheap from China as well, 15€ or something... I suppose the "foil" might be a bit thicker than Philips expensive ones. My Braun S5 shaves A LOT closer and faster (straight edge), so there just might be a limitation with theese circular heads overall...

@MrBazReviews

Жыл бұрын

Thanks for that it might come in useful for someone. I think the shaving experience will vary quite a bit from person to person, but the Philips isn't a bad shave wet or dry from my own use of it.

@chevyguy6961

Жыл бұрын

They don't alway's correctly fit. The shaver drive spindles can shear off if the cutter head mount is different. It'll take awhile maybe, but it will happen.

I mixed the blades and there from the one of the blade makes noise, help

@MrBazReviews

3 жыл бұрын

The cutters never touch the foils so you must have damaged one

I turned it on while still wet and now it sounds differently, did it break? I just bought it today! 😢

@MrBazReviews

Жыл бұрын

No just let it dry out open up the head part and let it drain

thank you, very revealing!

@MrBazReviews

Жыл бұрын

Not a problem!

Excellent, thank you

@MrBazReviews

3 жыл бұрын

Glad it was useful to you thanks for dropping in

Grazie fra mi hai salvato da mia madre

@MrBazReviews

8 ай бұрын

Not a problem

Thank you!

@MrBazReviews

5 ай бұрын

You're welcome!

Thanks a lot, you save me!!!

@MrBazReviews

Жыл бұрын

Glad to hear that!

I think it's also stated by Philips that cutters and comb are pairs so don't mix and match them because it will make the blade dull quickly

@MrBazReviews

3 жыл бұрын

I heard that but I'm not sure I believe it ;-D Reason is mixed up all the rotary shaver heads/blades on previous ones and never saw an issue. Sure keep them in pairs if you want I doubt it makes much difference they are all the same spec when you buy them

@vk4akp

2 жыл бұрын

@Dnee , your 100% correct. They are matched pairs and should never be mixed.

Lifesaver cheers mate

@MrBazReviews

2 жыл бұрын

Thanks no problem

I done but when I press power button then machine not working

@MrBazReviews

Жыл бұрын

Everything shown is accurate re-do it!

I had two of the couplers for the shaver come loose and can’t get them reinstalled. Any suggestions?

@MrBazReviews

3 ай бұрын

I don't know what you mean couplers, the back plastic part is a single piece and holds the foil/cutters in place.

@markverhagen8878

3 ай бұрын

The three black couplers that turn the blades.

@markverhagen8878

3 ай бұрын

Two of the three have come loose and can’t get them back on.

@MrBazReviews

3 ай бұрын

@@markverhagen8878 They should clip back on

@markverhagen8878

3 ай бұрын

@@MrBazReviews - tried pushing them on and screwing them on and nothing works. Can’t find anything in the instruction manual for the shaver or online.

How do I know when I need to change? How long does it take to change?

@MrBazReviews

Жыл бұрын

The foil will wear out they last around 2 years but it depends on how you use it (wet shaving more likely to last)

@MehmetCeren

Жыл бұрын

@@MrBazReviewsthank you 🙏

I was always led to believe that the cutters and heads should be maintained as a matched pair!

@MrBazReviews

2 жыл бұрын

Doesn't make any difference, they never touch each other

What do I do if my spring falls off

@MrBazReviews

Жыл бұрын

What spring? There are no springs on the cutters

very helpful

@MrBazReviews

2 жыл бұрын

Thanks appreciate that

Thank you

@MrBazReviews

3 жыл бұрын

You're welcome

Thanks.

@MrBazReviews

3 жыл бұрын

No worries!

When do I need to clean them?

@MrBazReviews

Жыл бұрын

Depends on use maybe every 3-4 months, you can just rinse them out too without taking it all apart

thank you

@MrBazReviews

2 жыл бұрын

You're welcome

Helpful 👍

@MrBazReviews

2 жыл бұрын

Glad it helped

Thanks

@MrBazReviews

3 жыл бұрын

No problem!

amazing thanks :)

@MrBazReviews

2 жыл бұрын

No problem 😊

thanks bruv

@MrBazReviews

Жыл бұрын

No problem

Thanks man have you tried to run as Prime Minister? You saved me lol

@MrBazReviews

Жыл бұрын

No problem! I stay out of that prime minister mess, too much of a joke!

I WAS TOLD THAT THAT THE CUTTER AND FOIL ARE MATCHED AND SHOULD NEVER BE MIXED. IS THAT NOT THE CASE?

@MrBazReviews

3 жыл бұрын

I heard that but I've never seen a problem mixed them many times no signs of any issues. The cutters never touch the foils, but if you want to keep the matched up to you

Tip: you can use q-tips and toothpics to clean hard to reach places

@MrBazReviews

3 жыл бұрын

You can!

only water good?

@MrBazReviews

3 жыл бұрын

Stainless steel blades perhaps other things will work do you need to? Water seems to be fine unless you want to disinfect them

price?

@MrBazReviews

Жыл бұрын

Links are included

The motors in these cheaper shavers are so underpowered, I honestly felt scammed when I tried it, and returned it immediately.

@MrBazReviews

2 ай бұрын

Seems to work for me even on chest hair, noisy motors are not good

thank you kind british man.

@MrBazReviews

2 жыл бұрын

Lol thanks

OMG TY FOR SAVING MY LIFE. I ALMOST KILL MY SELF TRYING TO REBUILD IT. FUCK YEAH TY, I LOVE U 4ever

@MrBazReviews

2 жыл бұрын

Lol good to hear!

Hi, it is not necessary to take the knives out of the machine to clean them effectively. Instead, fill the bottom of a plate with warm soapy water so that the knives are covered, turn on the shaver for half a minute. Then let the knives run for 5 seconds in clean water and the machine is clean. By the way, you shorten the life of the knives by mixing the knife and "holster" randomly around. Knife and "holster" belong together throughout their life.

@MrBazReviews

3 жыл бұрын

What I have found is that even blasting water through and soaking, sometimes larger hairs can get stuck in there. So maybe it's worth doing every couple of months taking it apart. I doubt mixing them will make much of a difference considering the cost of the 1000/3000 series shavers for what I paid it's cheaper to just buy another one v the official cutters/foil replacement

@TheLandbo

3 жыл бұрын

@@MrBazReviews You do not have to think about the large piece of beard, it is automatically chopped into smaller pieces and comes out with the other beard pieces you cut. The reason it is necessary and washing the cutters is to remove the fat that is sitting in your beard. If this is not done reasonably often, the machine may not cut properly. It's not every day I hear a man saying he having too much money for to avoid holding the same knives and "holster" together. \;-)

Nice unit thus far... Replaces a two-year old Philips Aquatec that had the problematic results of water getting into the inner mechanism that quite a few have experienced...Very poor design for something Philips claims that can be used in the shower! This one's construction seems a more solid for a wet/dry overall... Major differences between the two are design, no "Lift and Cut" blade system on this one, and no replace blade indicator light, neither of the latter two I'll miss... However, the 3000 does have a pivot under the heads for facial contours, and much more detailed charging indicators...where the Aquatec did not on either... We'll have to see how "watertight" this one actually is... This time, I purchased a two-year retailer warranty JIC... Cleaning on the 3000 is just like my former unit - Open up the unit in front, take off the head assembly, and then undo the triangular retainer to get at the heads... I usually clean my heads once every two weeks... It is actually important (even according to Philips) _to keep head (foil) and cutter together, as they are made as matched sets_ , so clean each set individually, and make sure _you return that particular cutter to that head_ before reinserting into triple head holder...

@MrBazReviews

3 жыл бұрын

I've doubts about the "Matched set" big time why because they're all the same, nothing matched about them. You can get replacement cutters and foils individually, and as they're all machined to the same spec it makes no difference at all. I've replaced foils and not cutters never seen any difference in performance or wear. It's alright so far I'll see ow it lasts. The other point to make is the cost of this (where I got it) is hardly much more than the replacement parts kinda pointless buying them might as well get an entire new unit!

@Jhihmoac

3 жыл бұрын

@@MrBazReviews - My thing is that "Wiil this newer design keep out the water on a supposed 'wet/dry' unit?" The previous one sure didn't, and when I took the damned thing apart, you could see the damage from the water getting in with the corrosion on both the switch and capacitors, and rust all over the motor... No wonder the thing didn't turn on, nor take a charge, and I only had it for two years and only got it wet when washing it out after each use...Never did I use it in the shower! When I purchased the new one, I did not see anymore of the 3000 Series (US iteration of the 3000 was known as the "Aquatec") in the old design, so I'm thinking Philips finally listened to their consumer feedback, realized that the water problem was commonplace, and changed the design... We shall see...

@MrBazReviews

3 жыл бұрын

@@Jhihmoac I did see a tear down a while back not sure how old it was the shaver, but it showed the battery/motor/switch compartment enclosed in a plastic case with O ring type seals on it, obviously something has to keep water out or it would fail pretty quickly. How good the seals are only time will tell. I do use it wet quite a bit - and there are so many variations on the same shaver, it's difficult to know when they were made. So far it's a nice enough shaver I guess the next 6 months will be revealing!

@Jhihmoac

3 жыл бұрын

@@MrBazReviews - Also, I recently found out that this particular design of the S3000 (and S2000) that feature the larger on/off switch, more prominent battery charge indicator and "5D" floating pivot, would be manufactured for right now in Philips' home country of Holland, as opposed to China, where the other cheaper models of Philips Shavers are mostly made... I had heard that when they had redesigned these models because of the leak issues, at least the first year (2020), Philips was going to make all of them in Holland just to make sure the water leak design issues get taken care of before they transfer them back to Chinese plants for manufacturing...

@MrBazReviews

3 жыл бұрын

@@Jhihmoac Interesting I was thinking the one I got was the older design, but the power switch is different to previous ones. Not that either of them are shown problems, I did hear some issues on earlier ones.

I got this razor from a dead grandfather. I hope you don't mind, Grandfather

@MrBazReviews

10 ай бұрын

He would want you to enjoy using it don't worry!

Italiano

@MrBazReviews

5 ай бұрын

No British!

Read the manual. DO NOT mix the cutters and combs.

@MrBazReviews

Жыл бұрын

It makes 0 difference the cutters never contact the foils

Take your shower head.. Put it on massage and hot water, open the razor and clean it.. No need for all that work.. 😀

@MrBazReviews

Жыл бұрын

Depends how you use it gunk can build up, but yes hot water keeps it mostly clean

@TheRealJohnHooper

Жыл бұрын

@@MrBazReviews I spray some cleaner on it and with the strong massage stream it really cleans it out.. 😀

Перепутал притёртые ножевые пары.🤨

@MrBazReviews

Жыл бұрын

Makes no difference the cutters never touch the foils

Thank you

@MrBazReviews

2 жыл бұрын

No problem!