Nice video! I have a 2007 Dyna street bob, one thing to keep in mind is that the engine is rubber mounted and the oil filter is directly above the rubber engine mount. Taking off the oil filter like that will put oil on the rubber mount and ruin it in no time at all, the rubber will expand and the engine will eventually shake like crazy and the mount will have to be replaced often. I have a flat funnel that goes under the oil filter, you take a big nail and put a hole in the top of the filter, then unscrew the filter a half turn so the oil slowly drains out of the filter and down the flat funnel. Then when it's completely drained you take off the filter. You can do it like you showed but I'd follow up with brake cleaner and clean off the rubber engine mount or you'll run into trouble. When I bought my bike the front mount was covered with oil, the rubber was expanded about 2X out of the mount and the engine shook so bad I was afraid to ride it without replacing the mount.
@SingleMaltMotors
3 жыл бұрын
Thanks for the tip, I'll pull that in next oil change
@JOSUE_LENIN
2 жыл бұрын
I'll give it a try sounds like a great idea
@nandosworld6303 Жыл бұрын
Awesome 🤩 videos amigo. Straight to the point. Cheers 🍻
@SingleMaltMotors
Жыл бұрын
Thanks friend
@bama59192 жыл бұрын
Thanks for the video brother 🙏
@SingleMaltMotors
2 жыл бұрын
Thanks brother
@gillybob7747 Жыл бұрын
Im 18 and I had bought a 2008 dyna street bob from my mentor, got a good deal for it, worked my ass of for it though lol. My dad's got a 1986 low rider special edition, and I bought mine so I could ride with him. But anyways, I appreciate you getting straight to the point and no bullshit, I need someone to teach me this stuff and watching your videos helps me out, thanks man!
@SingleMaltMotors
Жыл бұрын
Thanks brother
@mitchmcbride605311 ай бұрын
Excellent video mate one tip if I may share it you probably already know but get a plastic water bottle cut the top off where the lid is and slide it iber the filter works the same as the Harley drain thing you gotta buy
@SingleMaltMotors
11 ай бұрын
Thank you for watching, and thank you for sharing that tip. Cheers
@Voltomess2 жыл бұрын
Do you also have a specific torque for that linkage?? I bought my fxdb few months ago and now I want to change oil in March and I also have no access to oil filter because my linkage.
@SingleMaltMotors
2 жыл бұрын
Per manual, torque spec for shift linkage nut is 96-144 in.-lb.
@Voltomess
2 жыл бұрын
@@SingleMaltMotors yes I found that thank you Sir.
@noodlescnx31462 жыл бұрын
Keep going bro@☮️😬👍
@SingleMaltMotors
2 жыл бұрын
Thanks brother
@justinfinn68502 жыл бұрын
Are you supposed to run the engine and get it up to operating temp before draining oil?
@SingleMaltMotors
2 жыл бұрын
Yes
@windchaser510 ай бұрын
is it necessary to change transmission oil? Because I want to service my dyna street bob by myself and I saw couple of videos on KZread to find out how to service our bike at home. Some people changing a transmission oil also and some people don’t. So if I had to change transmission oil then which oil should I use?
@SingleMaltMotors
10 ай бұрын
Yes, you can and should service your transmission and primary drive oils as well. Per the Clymer manual the transmission and primary take the same oil, i.e., HD Formula+ Transmission and Primary Chain Lubricant. If not available then 20W50
@windchaser5
10 ай бұрын
@@SingleMaltMotors Sir. You mean the Engine oil 20W50 can be use on transmission and primary as per the rule? Sry for asking the same question twice . I just want to be 100% sure before i step on it.
@SingleMaltMotors
10 ай бұрын
@@windchaser5 No, you'll still need to use transmission oil. Here's a link to HD for reference, you'll want to make sure this is right for your specific bike. www.harley-davidson.com/us/en/shop/heavy-synthetic-gear-oil/p/62600091
@windchaser5
10 ай бұрын
@@SingleMaltMotors Thank you sir. But in my country is only available 85w140 :(
@bullast20462 жыл бұрын
No primary oil change?
@SingleMaltMotors
2 жыл бұрын
Will do shortly, swapping out my primary cover in the next month or so
@HuntersGaming12 жыл бұрын
Did you use a stand?
@SingleMaltMotors
2 жыл бұрын
Just the kick stand
@stevenrubio853 ай бұрын
What socket sizes???
@SingleMaltMotors
3 ай бұрын
Sorry, friend--I missed that in this video. Will aim for future
@redseaford9426 Жыл бұрын
Well which ones the pip drain plug?
@SingleMaltMotors
Жыл бұрын
I don't understand your question
@redseaford9426
Жыл бұрын
@@SingleMaltMotors fuckin auto correct changed oil to pip lol I couldn't get a close enough look and which plug you removed to drain the oil. There's a couple around the area under mine where it would drain
@SingleMaltMotors
Жыл бұрын
@@redseaford9426 Gotcha. I'll try to paste an image into comments showing the oil drain plug.
@SingleMaltMotors
Жыл бұрын
Link to image on web: www.justanswer.com/uploads/harleytech/2008-10-11_195246_Oil_Drain_Dyna.jpg
@SingleMaltMotors
Жыл бұрын
It's the plug on the side of the oil pan, not the one on the bottom
@RickyCanDo Жыл бұрын
Tool sizes would be nice
@SingleMaltMotors
6 ай бұрын
Thank you, that is valid feedback
@tannersimons1525 Жыл бұрын
Never remove a Overing from the oil filter it ruins it that’s stupid just put a little bit of oil on top of the O-ring but don’t remove it
@SingleMaltMotors
Жыл бұрын
Incorrect my friend, it's completely safe and good practice. Thanks for your opinion
@TankToChest
Жыл бұрын
@@SingleMaltMotorsAs a certified technician with accreditation your an idiot… K&N filters are ALREADY PRELUBED!!!! I bet you 100 dollars I call K&N and they call you and idiot too…
@TankToChest
Жыл бұрын
Folks Don’t pull the gasket off your new filter
@howdiedoodie85879 ай бұрын
Started off as a bad video. Show the damn oil plug. There are some here that don’t know where it is. Also throw that Carrollton oil out the back door and buy some Amsoil.
Пікірлер: 44
Nice video! I have a 2007 Dyna street bob, one thing to keep in mind is that the engine is rubber mounted and the oil filter is directly above the rubber engine mount. Taking off the oil filter like that will put oil on the rubber mount and ruin it in no time at all, the rubber will expand and the engine will eventually shake like crazy and the mount will have to be replaced often. I have a flat funnel that goes under the oil filter, you take a big nail and put a hole in the top of the filter, then unscrew the filter a half turn so the oil slowly drains out of the filter and down the flat funnel. Then when it's completely drained you take off the filter. You can do it like you showed but I'd follow up with brake cleaner and clean off the rubber engine mount or you'll run into trouble. When I bought my bike the front mount was covered with oil, the rubber was expanded about 2X out of the mount and the engine shook so bad I was afraid to ride it without replacing the mount.
@SingleMaltMotors
3 жыл бұрын
Thanks for the tip, I'll pull that in next oil change
@JOSUE_LENIN
2 жыл бұрын
I'll give it a try sounds like a great idea
Awesome 🤩 videos amigo. Straight to the point. Cheers 🍻
@SingleMaltMotors
Жыл бұрын
Thanks friend
Thanks for the video brother 🙏
@SingleMaltMotors
2 жыл бұрын
Thanks brother
Im 18 and I had bought a 2008 dyna street bob from my mentor, got a good deal for it, worked my ass of for it though lol. My dad's got a 1986 low rider special edition, and I bought mine so I could ride with him. But anyways, I appreciate you getting straight to the point and no bullshit, I need someone to teach me this stuff and watching your videos helps me out, thanks man!
@SingleMaltMotors
Жыл бұрын
Thanks brother
Excellent video mate one tip if I may share it you probably already know but get a plastic water bottle cut the top off where the lid is and slide it iber the filter works the same as the Harley drain thing you gotta buy
@SingleMaltMotors
11 ай бұрын
Thank you for watching, and thank you for sharing that tip. Cheers
Do you also have a specific torque for that linkage?? I bought my fxdb few months ago and now I want to change oil in March and I also have no access to oil filter because my linkage.
@SingleMaltMotors
2 жыл бұрын
Per manual, torque spec for shift linkage nut is 96-144 in.-lb.
@Voltomess
2 жыл бұрын
@@SingleMaltMotors yes I found that thank you Sir.
Keep going bro@☮️😬👍
@SingleMaltMotors
2 жыл бұрын
Thanks brother
Are you supposed to run the engine and get it up to operating temp before draining oil?
@SingleMaltMotors
2 жыл бұрын
Yes
is it necessary to change transmission oil? Because I want to service my dyna street bob by myself and I saw couple of videos on KZread to find out how to service our bike at home. Some people changing a transmission oil also and some people don’t. So if I had to change transmission oil then which oil should I use?
@SingleMaltMotors
10 ай бұрын
Yes, you can and should service your transmission and primary drive oils as well. Per the Clymer manual the transmission and primary take the same oil, i.e., HD Formula+ Transmission and Primary Chain Lubricant. If not available then 20W50
@windchaser5
10 ай бұрын
@@SingleMaltMotors Sir. You mean the Engine oil 20W50 can be use on transmission and primary as per the rule? Sry for asking the same question twice . I just want to be 100% sure before i step on it.
@SingleMaltMotors
10 ай бұрын
@@windchaser5 No, you'll still need to use transmission oil. Here's a link to HD for reference, you'll want to make sure this is right for your specific bike. www.harley-davidson.com/us/en/shop/heavy-synthetic-gear-oil/p/62600091
@windchaser5
10 ай бұрын
@@SingleMaltMotors Thank you sir. But in my country is only available 85w140 :(
No primary oil change?
@SingleMaltMotors
2 жыл бұрын
Will do shortly, swapping out my primary cover in the next month or so
Did you use a stand?
@SingleMaltMotors
2 жыл бұрын
Just the kick stand
What socket sizes???
@SingleMaltMotors
3 ай бұрын
Sorry, friend--I missed that in this video. Will aim for future
Well which ones the pip drain plug?
@SingleMaltMotors
Жыл бұрын
I don't understand your question
@redseaford9426
Жыл бұрын
@@SingleMaltMotors fuckin auto correct changed oil to pip lol I couldn't get a close enough look and which plug you removed to drain the oil. There's a couple around the area under mine where it would drain
@SingleMaltMotors
Жыл бұрын
@@redseaford9426 Gotcha. I'll try to paste an image into comments showing the oil drain plug.
@SingleMaltMotors
Жыл бұрын
Link to image on web: www.justanswer.com/uploads/harleytech/2008-10-11_195246_Oil_Drain_Dyna.jpg
@SingleMaltMotors
Жыл бұрын
It's the plug on the side of the oil pan, not the one on the bottom
Tool sizes would be nice
@SingleMaltMotors
6 ай бұрын
Thank you, that is valid feedback
Never remove a Overing from the oil filter it ruins it that’s stupid just put a little bit of oil on top of the O-ring but don’t remove it
@SingleMaltMotors
Жыл бұрын
Incorrect my friend, it's completely safe and good practice. Thanks for your opinion
@TankToChest
Жыл бұрын
@@SingleMaltMotorsAs a certified technician with accreditation your an idiot… K&N filters are ALREADY PRELUBED!!!! I bet you 100 dollars I call K&N and they call you and idiot too…
@TankToChest
Жыл бұрын
Folks Don’t pull the gasket off your new filter
Started off as a bad video. Show the damn oil plug. There are some here that don’t know where it is. Also throw that Carrollton oil out the back door and buy some Amsoil.
@SingleMaltMotors
9 ай бұрын
Thanks for the feedback