Can't believe it's that easy!!!

New to Skidoo this year. Glad i found you guys on KZread!! You have very informative videos. I just bought the 2020 Backcountry Xrs 850 with Shot. I also have the Titan helmet with electric goggles,have you guys ever thought of doing a video on installing the port for the electric goggles? Keep up the great videos!!!

@4SeasonBros

3 жыл бұрын

Awsome enjoi these fun mschines

Well done. Thanks

@4SeasonBros

3 жыл бұрын

Thank you

There is now a drain plug. The drain plug and the fill to level plug are the same size. For the chain tension, I just tighten by hand then back it off a bit. Done.

Hello do you have the same kind of video but for clean the exhaust valve on a 850 etec???

legend

I noticed your coolant level looks low in the coolant container.How full should it be.

If it were my sled I would have tightened the chain tension a little bit. Otherwise awesome vid!

@dejpenney

6 жыл бұрын

VelocitySCTR I agree, the chain is loose, plus when tightening the pin is designed to stay in....

Will you be doing an install video for the ski doo LED light on this sled

@4SeasonBros

6 жыл бұрын

No i will not be

Hi, I have a problem on my 2012 600ace skidoo. There is a loud grinding noise when I put the gear in reverse. When I back up, it slams and disengages with the noise of the pinion rubbing. Do you have any idea where it could come from? Thank you so much 🙏

Hi I am in a pinch what antifreeze do you run in these gen 4s?

@TheAlexdylan97

Жыл бұрын

dexcool

have you ever changed the spark plugs?

@4SeasonBros

5 жыл бұрын

No

is there a new gasket that needs to be reapplied? thanks

@4SeasonBros

5 жыл бұрын

Not

@4SeasonBros

5 жыл бұрын

No

You’re actually suppose to leave the cotter pin in when adjusting the chain tension. It purpose it to prevent the tension bolt from backing out . I just saved you a few minutes of hassle

@4SeasonBros

Жыл бұрын

I was just wondering if you do not remove the pin you cannot tight or loosen the tensioner So how were you getting around that to tighten your tensioner

@joetech4054

Жыл бұрын

Some sleds have the pin in the hole through the adjuster (my ‘21 does) which prevents the adjuster bolt from loosening. My wife’s ‘23 has the pin in the recess of the adjuster bolt. That allows adjustment without removing the pin but will not prevent the adjuster from backing out over time. Both 600r engines. Not sure why the discrepancy. I like the pin through the hole like my older sleds were.

how many k should we be doing this?

@4SeasonBros

5 жыл бұрын

5000 around

ta pas suivie les spec de tork et la sequence de serrage pour les bolt du chain case

Video of changing plugs

@4SeasonBros

3 жыл бұрын

Will do a video shortly, thanks

Do you use synthetic oil or mineral?

@4SeasonBros

Жыл бұрын

The brp synthetic oil

@handballduenas

Жыл бұрын

@@4SeasonBros thank you.

@4SeasonBros

Жыл бұрын

Your welcome

it is not necessary to unscrew the temperature sensor, it has a connector on the electrical cable

@4SeasonBros

3 жыл бұрын

Ok good to know

you should really take a good look at your chain. spin your track and look at all the links. make sure they arent broken. otherwise you are on a ticking timebomb