Airflow/faster draining aside, best practice for oil change is to remove the fill plug first and then remove the drain plug. If you drain the oil out of something and then can't refill the oil because the plug is stuck, you're in a bad spot. This mostly goes for cars and trucks (especially differentials, and transfer cases), but is definitely best practice across the board.

I really need basic videos! Nothing is too basic for many of us newbies> Thanks for making this video!

Thanks for the video. I have the same compressor and I think an oil change is long over due. Appreciate it!

We all need basic videos , thank you.

nice job, thank you for sharing !

Great work Ed

Good video. Very informative. Thank you.

great vid!!! keep em coming!!! neccessary!

thanks - helpful. Can't get motorkote in UK.

Thanks, enjoyed the video.

Great video. I just done this. Tick!

Was the oil fill capacity 16 oz?

Thank you for the video

Thank you Jimmy

Thank You!

Well done.

Thank u much appreciated

How's the comp holding up with the Motorkote? Increased performance or Snake oil . . . Inquiring minds want to know.

@SevenSixTwo2012

2 жыл бұрын

Motorkote is not about increasing performance, but about increasing longevity. His compressor should theoretically outlast one without Motorkote after same amount of cycles or hours. See Project Farm's videos about lubricity testing.

can i use ATF for air compressor oil ?

What kind of oil do u use.

Oil capacity depends from how hp and air litres has the compressor, as an example a toros em 50l/2hp needs 250 ml sae 30 api-sj/cd

How often should you change the oil? I’m sorry if it said in the video I had to skip quickly while at work. Thankyou I’ll definitely be coming back to the video for reference.

@Sparkyspage

3 жыл бұрын

Every 300 hrs

@hastabyebye

3 жыл бұрын

Christopher Spark ; What if I've had it for 10 years and only put 30 hours on it?

@donschlonski2936

2 жыл бұрын

@@hastabyebye manual says every 3 months or ......

I just gave the 1K like.

I would of put that oil back in it was nice and clean.

@hastabyebye

3 жыл бұрын

I was thinking of asking for it.

The General Expert had his compressor overfilled before the change....

@JAI45624

3 жыл бұрын

Thats the general for you

My site glass is old and dark I can't see how much is in there how can I tell if it's over the mark

@glendakaycopass6286

2 жыл бұрын

Over mark lol I think I need to drain it out down to a mark I didn't look for so where is this mark please help

@frankielomas7826

2 жыл бұрын

@@glendakaycopass6286 do they sell a site glass to change it out

@frankielomas7826

2 жыл бұрын

@@glendakaycopass6286 I did drain it down to the mark but still dark

I did this today and spilt oil all over my parent's concrete tiled driveway. The funnel didn't work well and I didn't tilt it.

@jcoul1sc

9 ай бұрын

do it on a hill. You can buy chemicals to help remove oil off concrete, try lots of Dawn dish soap too and pressure washer

Are compressors without oil better?

@AlessioSangalli

3 жыл бұрын

No, they are either cheaper or used when air has to be good grade. For general performance oiled compressors are typically much better

@smallenginesgarage7168

3 жыл бұрын

@@AlessioSangalli why

@AlessioSangalli

3 жыл бұрын

@@smallenginesgarage7168 because most mechanical devices need lubrication to function properly, and not providing it makes them either cheap or very limited in performance.

@smallenginesgarage7168

3 жыл бұрын

@@AlessioSangalli i use my oilles compressor only for blowing air and pumping tires

@AlessioSangalli

3 жыл бұрын

@@smallenginesgarage7168 that's pretty much what an oil-less is supposed to be good for 👍

Thnax Jimmy

You don’t need to tilt it

USE ONLY 20W40 or 50 MINERAL....

Why is the compressor full of oil?! You should only fill to half way up the indicator window.

my sight glass is completely useless at this point. can't see anything through it. it honestly looks like metal instead of glass/plastic

Did ther Motorkote additive quit down the compressor ??????

You have a sight glass then you don’t need to measure how much oil you put in. Besides, you don’t have to tilt the whole compressor to drain the oil. The drainage hole is already put at the lowest level.

@AlessioSangalli

3 жыл бұрын

On my 60gal compressor i can get a great deal of extra oil out if I tilt it (which is a two men job)

@KTHKUHNKK

2 жыл бұрын

It doesn't hurt to give it a little tilt

@martindesmarais7158

Жыл бұрын

So if this window with the red point is the oil gauge, how is the read on it ( suppose that level must be over or NOT UNDER the red point,,, Can you confirm ??

@sptrader6316

11 ай бұрын

@@martindesmarais7158 Oil level should be on the red dot. (middle).

@jcoul1sc

9 ай бұрын

@@AlessioSangalli Just ask Jack to lift it, she's very strong, lifts cars and trucks!!!

I have never owned 20 gallon air compressor daughter bought it for dad God rest his soul and I thought my farm working friend was a little smarter than he was doing the day I picked up he was thinking about it not break the plastic cover round the moter rit looked smart to lay it over but time we got home oil naturally drained out lol again I thought he new better anyways I had to get compressor oil I think I might've over filled I put it all in I haven't plugged it up yet but vehicles are better to low oil than to full do I need drain some out SOME WOMEN R PRETTY DUMB BUT I NEED SOME ONE TO PLEASE LET NO WHERE DO I FILL IT TO

I just changed my oil for the first time in 15 years after I heard the compressor sounding funny. It came out thick and black at first then runny and clear looking then back to black now my only problem is trying to figure out how much oil to put in it. Lol. So I was watching this video to try and figure that out. Ow well.

@SevenSixTwo2012

2 жыл бұрын

You should probably flush it with diesel before putting new oil in.

It’s cold ...no no

Where is Taiwan if not in China 😊

Hai

@happysawfish

3 жыл бұрын

SHYAM: HAI !!

Yang milih allah like 800 ya yang milih dajal abaikan saja

Great video. thank you for sharing.