For any noobs out there, you don't need a hydraulic press to remove and replace studs. A good slap of a little sledge hammer will pop them out and you can use the lug nuts to tighten and pull them back into place. I guess if you have access to a professional machine shop then use it. :-)

@Italjohn

4 жыл бұрын

HI Michael. That's correct, there are many ways to do this job, but as you say, I have access to the tools so why not use it.

Well Italjohn, Great job you did with changing the studs to larger one`s. I 1918 I did the same so when I`m remembering correct in 1918 or 1919.so I do know the struggle you had to fasten the studs and the nuts again. any way nice performance. Great video well narrated Greetings HCS.

@Italjohn

3 жыл бұрын

Thank you sir 🙂

EXCELLENT JOB NICE CHAP EXPLAINED IT WELL

Great content. Keep it up!

great video! i need to put longer studs on mine for my new wheels and will be tackling this soon! who the hell has a 500nm torque wrench though...lol I sure dont :(

It's something like 90 per tyre in greece (Michelin)you can get cheap ones in this side for 60 per piece

Takk for svært god video.

@Italjohn

Жыл бұрын

Så bra at du likte den 😀

Hi John Thanks for the videos they are really helpful, I have exactly the same wheels as you matched in the video, what size of tires did I put on them?

@Italjohn

2 жыл бұрын

My tires are 215/60R16

EXCELENT! OK ! SUPER !

Hi John, nice video! Where did buy the longer studs? I can't seem to find them anywhere. I need 75mm for my application (I think). I have ET60 + 25mm spacer = et35. Currently te standard bolts (47 mm) fall 3 mm short in the spacer.

@Italjohn

6 жыл бұрын

Here you go Yuri: www.brickwerks.co.uk/long-wheel-studs-60mm-m14x1-5.html and www.brickwerks.co.uk/conversion-stud-60mm-m14x1-5.html And please subcribe to the channel as well :-) Thanks :D

@jwgmail

4 жыл бұрын

in the US go to t3technique.com

Half a decade old video and still super useful, thank you ItalJohn 🤗. I'm going to attempt this on the weekend. I have a old canal workshop's manual press, (forged in 1878), it weights about 80kg which I'll use to push out and in, (only paid £20 for it). 😊 My question, is it OK to re-use the hub castellated 46mm nut again or should they be replaced? Many thanks.

@Italjohn

Жыл бұрын

Hi there Peter. I have always reused mine, with no trouble. I don't know if it needs to be changed everytome you loosen it?

@petehuws

Жыл бұрын

@@Italjohn thank you my friend, I'll follow the master and re-use mine. All the best to you Sir 🫡

Maybe next time Lincoln Logs for a jack stand!

Can you tell me the dimension of knurled for the stud ? I wanna know the wheel hole for knurled stud.

@Italjohn

5 жыл бұрын

I don't know what knurled means??? This is the bolts: www.brickwerks.co.uk/long-wheel-studs-60mm-m14x1-5.html and www.brickwerks.co.uk/conversion-stud-60mm-m14x1-5.html

@sanctusemperor

5 жыл бұрын

I found www.dormanproducts.com/p-3544-610-246.aspx?year=1990&make=Volkswagen&model=Transporter&origin=&parttype=Wheel%2520Lug%2520Stud

To switch my Syncro to Mercedes rims, I had to change to 72mm studs

The stock rims are sooo nice ,why not keeping them ?or put chrome hubcaps on them !

@Italjohn

6 жыл бұрын

It's almost impossible to get decent tires for the 14" rims. 16" on the other hand have loads of options.

@type2523

6 жыл бұрын

Italjohn13. How hard can it be? I have these tyres ,search for Michelin agilis or Michelin classic I can sent you pics if you want

Great job John. Did you need to drill out the stud holes in the alloy? What width are yours?

@Italjohn

2 жыл бұрын

No drilling needed. 16x7,5 et36

@adamjarvis3493

2 жыл бұрын

@@Italjohn 16mm? Thanks for your help. I have a set of Ronals. The stud drops into the hole, no problem. I ‘pulled’ the 5 studs into the hub plate using my air gun. I don’t have a press. As a result, the studs are not quite perfectly aligned and the alloy will not push on. The stud hole is 14mm. So, I either find someone with a press, or slightly increase my alloy hole, or both 😀

@Italjohn

2 жыл бұрын

No, not 16mm. The rims are 16" and 7,5" width.

Do you have a video on doing the front wheels? I have a 1989 Syncro.

@Italjohn

5 жыл бұрын

The front wheels just needed longer studs/bolts, as it has bolts before. I don't know how it is on a syncro, sorry.

@trinifirst6702

5 жыл бұрын

@@Italjohn OK.

@Italjohn

3 жыл бұрын

Look here: kzread.info/dash/bejne/ioCJzLRqibu5l5s.html

А если ещё заменить подшипник роликовый на двухрядный шариковый , укоротить распортную втулку то получаетсяещё лучше. Очень хорошее ваше видео.

Merci peur changé le roulement vw t3

How many mm. For rear spacers?

@Italjohn

18 күн бұрын

I used 6mm spacer

Michelin agilis

What is the size of the rear center bolt? 46mm,47mm?

@Italjohn

Ай бұрын

I can't remember, sorry 😐