How to change the rear bearing of a carpet centrifuge ?
Ғылым және технология
Sooner or later, the bearings on the centrifuge are out of order. This can happen for various reasons. But you will have to change the bearing. How to do this is shown on this video.
We hope this video will facilitate this procedure for you
Пікірлер: 9
Tnx for the video
Hello, do you have ( or know how) video how to replace front bearing from the door? Thank you.
@RWMISTANBUL
6 жыл бұрын
You need to know the model of the centrifuge. different centrifuges, arranged in different ways. If there is a photo, I will try to help you.
@zlatkovujevic7348
6 жыл бұрын
Hello, thank you for reply. I have Cleanvac rl 1400 model same as in this video kzread.info/dash/bejne/pGyqrpugldXNZco.html . I have taken off the 6 nuts from housing but it seem to be stuck or there is some other way to pull it off whit some special puller or something?
@RWMISTANBUL
6 жыл бұрын
Unfortunately, this company makes the front door completely different. very different from our centrifuge :(. How to change the bearing from the front door of this company, we can not tell you, unfortunately. But we can tell you about the repair of your equipment :)
@zlatkovujevic7348
6 жыл бұрын
Rustam Afshani thank you so much for the help.
@RWMISTANBUL
6 жыл бұрын
You r welcome Mr. Zlatko. You can look our web site and our machines :=) www.rwm.istanbul
Kapak için aynı işlemi nasıl yapacağız
@RWMISTANBUL
3 жыл бұрын
Caner Bey, kapak için bu video size yardımcı olabilir. kzread.info/dash/bejne/gpykj86FmsKtaLw.html