How To Change the Drive Belt on a Can-Am Maverick X3
Тәжірибелік нұсқаулар және стиль
Can-Am OEM Drive Belt!
www.rockymountainatvmc.com/p/...
If you’re looking for a belt that can last for miles or just want a reliable spare to get you home, the Can-Am OEM Drive Belt is always a good choice. In this video we demonstrate how to change your drive belt on a 2017 Can-Am Maverick X3.
Can-Am Puller/Locking Tool
www.rockymountainatvmc.com/p/...
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Us On Social Media!
FACEBOOK: rmatvmc?utm_...
INSTAGRAM: rmatvmc?ut...
TWITTER: RMatvmc?...
Пікірлер: 73
Glad I found just enough internet service out on the trail to teach me how to change my first belt. Thank you thank you thank you
Simple and informative. Thanks for sharing
Thank you for this video 🙏
Thank you for this info. Great video
I know it's an older video but thank you guys for putting this up it helped me out a lot and I just bought this exact model
@mikemiller9119
Жыл бұрын
Thank you :)
You guys Rock.
Great Video
Helped me out when I ripped mine apart on the trail.. Thank you👍🏼🤙🏼
Very helpful. 2018 belts easily lasting 1500 miles.
Can you thread a bolt through the center of the tool? Or does it have to be the threaded hole on the side?
Thanks
how do you adjust belt deflection?
can you please show canam ryker owners how to change cvt belt on ryker rally?
Hi, i have big problem with my can am outlander 1000r xmr , i changed two belts in last 2 months wich means one month one belt i dont do wheelie or something like that but it breaks so often pls help should i buy maverick belt and put it on my outlander and what i should do before i installed it pls help and do you have tips what i shoudn’t do .
If you broke the back side of the housing what do you have to do to change it
I purchased a super atv belt for my x3 there are not any directional arrows on the belt. I need some guidance
Great video and well explained. I had to help my buddy with his Can Am and this was useful. However, I will admit, this whole episode just adds more reasons to why I LOVE my Yamaha YXZ so MUCH!! Also, I did not realize the Can Am belts cost more than a YXZ Barnett Clutch, carbon fiber, with springs; which you change in a YXZ at about 9,000 miles. No regrets! Thanks!
@sal3321
6 жыл бұрын
parkcitymacs i
@davidpaulin
6 жыл бұрын
depends how it's being driven .. brp research center have a xyz and they exploded a clutch well before 1000kms
@parkcitymacs
6 жыл бұрын
Very true! In particular if you race. Having a product that can be raced and hammered on, yet is reliable... Well, it's why the YXZ is the dominant race machine. Reliability and cost.~ proof is in the race results. If they get King of Hammers this year, they will tie up almost every off-road series. Again, working on my buddies 17' Can-Am and the seeing endless electrical problems he has had and see how many X3's sit in the shop weekend after weekend, really made me glad what I chose!
@ericbuchta9765
6 жыл бұрын
parkcitymacs How to replace the x3 spark plugs? I have a miss fire on all three cylinders. That is what they told me to do. Also bad gas they said did it.
@ericbuchta9765
6 жыл бұрын
parkcitymacs cool just found out how to send messages on here😆
Thanks I’m ready to do this shit lol
I purchased an 2019 Maverick x3 turbo R. I was told that I should always have an extra clutch belt on hand before going out riding. What aftermarket belts do you suggest, please?
@rmatvmc
5 жыл бұрын
Congrats on the new machine! There are a lot of varying opinions out there and everybody has their preference but other than the OEM belt, I would recommend trying one of the Trinity Racing Extreme belts. You can check those out here: www.rockymountainatvmc.com/parts/trinity-racing-extreme-drive-belt-p
My belt will not tighten help?
When rotating the clutch to settle the belt, if I rotate it too much will harm anything? I’ve been going into limp mode going over 40mph
@sahibdipsandhu
2 жыл бұрын
nah it shouldnt do naything buscause all your doing is spinning it. Nothing is really going on. I'd say its pretty good chance something else is wrong with your unit. Best of luck to you homie
I have heard that you should wash the new belt with soap and warm water before installing it, is this true? I have not blown a belt yet as I just recently purchased my Maverick X3 Max Xrs. I have purchased a spare belt just in case. I need to find out if washing it is required or not.
@rmatvmc
5 жыл бұрын
*Babak Sadeghpour* We don’t see it to be a problem just as long as its dry before install. Definitetly a little scotch bright pad on the sheaves is a good practice as well. Thanks for watching.
@myquicklist1
5 жыл бұрын
Thank you for the reply, so you do not see it to be a problem with washing it? or not washing it at all?
@Ramg66
5 жыл бұрын
@@myquicklist1 He doesn't see a problem washing it, hence make sure it's dry before installing.
Some belts have no directional arrow. Then what ?
Easy
Nooicee
Is it normal for the belt driven open tool to eat into the metal? When I changed mine it left a spot where it made contact with machine
@nicklandrum1820
Жыл бұрын
Yes just put a quarter in between or buy the aftermarket wrench
Is it normal for the belt to flop when you let go of the gas?
My new can am belt doesn't have directional arrows on it
That clutch tool, was it supposed to come with the machine purchase?
@rmatvmc
6 жыл бұрын
Buying the machine new yes, they should come with that clutch tool.
@MrMoronification
6 жыл бұрын
Thanks sir!
@camyota
6 жыл бұрын
My buddy has an 800 defender which requires that same tool...it didn't come with it, where would he buy one?
@MrMoronification
6 жыл бұрын
camyota 912 from his dealer or online
@G1bson258
5 жыл бұрын
Southeast Georgia Scale R.C. Walk in your can-am dealer and ask them for a tool kit that comes standard with these machines. They should be free and always have a bunch of spares
Can you write the Part-Number or a Link from the Tool you use? Regards from Germany!
@rmatvmc
4 жыл бұрын
www.rockymountainatvmc.com/parts/can-am-puller-locking-tool-p? Tools needed are always posted in the description of the video.
Any shipments to Mexico?
@rmatvmc
4 жыл бұрын
Yes, we ship to Mexico.
How do I change it on my Honda Talon?
@rmatvmc
2 жыл бұрын
Haha luckily you don't have to!
That's why l own yamahas..
👍👍👏🏻👏🏻
My Honda rippin wile your belt is slippin
Does the SXS need to be in neutral when changing the belt?
@rmatvmc
3 жыл бұрын
Neutral or park will be fine. -Charles
Where can I buy that tool?
@rmatvmc
2 жыл бұрын
The second link in the description of this video will take you to the Can-Am Puller/Locking Tool. Or you can click the link below. www.rockymountainatvmc.com/parts/can-am-puller-locking-tool-p
The round spreader tool does not come with the machine. FOS
Ecu location on a 21’ ?
@rmatvmc
11 ай бұрын
Should be behind the driver seat on a 2 seat or behind the driver side rear seat on a 4 seater.
@jovaniestrada7591
11 ай бұрын
@@rmatvmc thank you!
Should have blown the dirt & dust out of the clutches with compressed air & wiped down the case.
So much easier and cheaper than replacing the defective clutch in the YXZ. Glad I didn't buy the YXZ with NO low range. Poor design by Yamaha.
@ojtamayosr
Жыл бұрын
The YXZ is a one-trick pony. Only good for running fast in flat open terrain.
Thanks for the vid! Changing the belt shouldnt be easier than changing oil, however on the Can Am its way easier. In fact id say this is the easiest part of owning an X3. It surely isnt getting in and out of one of these cheaply made POS vehicles. The body panels and doors on a machine costing over 20k is laughable. My Tonka truck toy when I was a kid was built with more rigidity than this milk carton rig disguised as body panels.The only thing worth a damn on this machine is the speed, everything else fails! Thin control arms, shock mounts thin metal, seats mounting up front on 1/16 inch thin flanges. My god this rig took me and yall to the bank. Next time go Kawi, reliable easy to do maintenece and stout with doors that are actually double skinned and full you dont have to open them with a winch strap.
I’d go with a YXZ but great video!
Where is a good video on how to judge what torque you’ve applied when hand tightening a wrench? You said tighten to 4.4 lbs of torque and I am unfamiliar with how to achieve that without some measuring device??
@rmatvmc
3 жыл бұрын
There is no good method to determine torque by hand tightening. You need a torque wrench
@inpursuitofgoodservice9636
3 жыл бұрын
@@rmatvmc Thank you, I discovered that from a another KZread video I ended up finding.
@smilesaredaggers3088
2 жыл бұрын
@@inpursuitofgoodservice9636 you can calculate it based off the thread pitch and count on bolt as well as diameter in a mathematical equation on metal surfaces number of rotations = force on area of shaft ....
How to realive a slow atv engine