How to change rear rotors and pads : Ford Mustang V 2005 - 2013
Автокөліктер мен көлік құралдары
In this step by step video you will see how to change the rear brakes on a Mustang GT 4.6 V8.
I'll show you :
- How to unmount the caliper and it's bracket
-How to change the pads
- How to change the rotors
- How to push back the piston
Пікірлер: 37
Great job thank u.Love the color of caliber.
@fab-b9818
5 ай бұрын
Thanks ! My pleasure 😉.
Thank u .good job.appreciate it
My dude just the video I needed to see
I'm trying to learn to fix my own car. I have a 2010 V6 Mustang 🐎 and it's been giving me a hard time lately. I got it from a crappy dealership I wish I didn't. I do love my car and would do what I can to fix it. Without going to the shop or if I have too. I Have others too. That helps me a lot. I want to learn how to do this too and save money. I'm having a leak issue right now and I can smell it. Even though I replaced the water pump.
Hey man really appreciate the help with the video.. good stuff
@fab-b9818
5 жыл бұрын
Hi Jose, glad you appreciate, thanks 😉 !
Thank you
These are great videos thank you
@fab-b9818
5 жыл бұрын
Thanks, my pleasure 😁 !
merci
Who sands the break pads first lol
if one of the dual piston is slightly leas compressed than the other one maybe by like 5mm will it make even contact once i pump my brakes during normal use?
I wonder if you can put a breaker bar with a socket on instead of hitting the wrench?! Or use a deadblow not a hammer( if you have nice wrenches)
@fab-b9818
3 жыл бұрын
Yes you can, my wrench is a cheap one I use only for this, and he's still alive 😄.
I was struggling so hard with those pistons, they were extremely tough it took me and a friend like 20mins each side
@fab-b9818
6 жыл бұрын
So did I until I figured you have to turn them as well as push in ^^ !
@thisguy9569
6 жыл бұрын
FAB-B I put a good amount of pressure on it and it still wouldn't turn well, was just a pain
just use the correct tool so you dont damage the piston or boot !
You said rotors and pads🤔 I saw caliper and pads😑
You can really just spray paint the calipers?
@leorodriguez8679
4 жыл бұрын
Highly recommend heat resistant paint such as engine enamel paint or caliper paint. Anything high heat will work!
clamp and pliers!!!!! omg dont do this people!!!!! tool is cheap go buy one for god sake
@fab-b9818
5 жыл бұрын
If you don't have the right tools but have to do the job you have to find a way...
@dennispetersen511
4 жыл бұрын
I just bought a tool on Amazon for $20. Well worth it!
@markcarter2613
4 жыл бұрын
Should have just hit the "key" with his purse!
The wrench is not called a key
@fab-b9818
5 жыл бұрын
I have trouble with technical terms, my native language and main channel are in french...
South African?
@fab-b9818
2 жыл бұрын
French 😄
bleed the brakes,,,the fluid is dirty looking
Your embedding advice is terrible. You need to embed them properly. Also didn't see you tourque the bolts to the right amount. Also very important.
@fab-b9818
Жыл бұрын
For every day road use, it will do just fine. Never had problems bedding in my breaks this way... You're right about tightening to the right tork, but most people aren't equiped, and with that as well I've never had issues.