Damn this guy clean. when i did my brake job on my audi i was a mess. even lost my 21 mm socket in the process haha

@aristica1

Жыл бұрын

I also broke a 21mm socket. Those caliper bracket bolts are a mess huh

Hold up a minute. I just changed out these rear discs without having to take off the caliper bracket. That's not really a required step and I just found it by accident. I was prepared to undo the bolts in the back and the disc shifted, after I removed the securing bolt for it, and the disc came out when I had braced to catch it. Good stuff though.

@autodocuk

5 жыл бұрын

Thank you for your feedback ! Thank you for your valuable remark! It will be very useful for our viewers. Our new videos will show the replacement in more details and we will tell more about it. Best regards, Autodoc.

@ConSamification

4 жыл бұрын

Your comment has helped me so much tonight as couldn’t remove the Cali per holder!!! Thanks from UK

@leightoncristian7590

2 жыл бұрын

I guess I am kind of randomly asking but does anybody know a good site to stream new series online ?

@konnorzayn5097

2 жыл бұрын

@Leighton Cristian flixportal

@leightoncristian7590

2 жыл бұрын

@Konnor Zayn thank you, signed up and it seems like a nice service :D I appreciate it!!

Whoa! - what you just do there, at 2:52 ? Something we should know?

@autodocuk

5 жыл бұрын

Thank you for your feedback! At that moment we were dismantling the sport bracket second bolt. In our new videos we will describe and show this replacement in more details. In our new videos we will describe and show this replacement in more details. Best Regards, Autodoc.

excellent video 😊

@autodocuk

7 жыл бұрын

Thank you for the feedback! We are glad that our videos are useful for you. Best regards, Autodoc.

I heard I don’t even need to take out the caliper bracket, is that true? 🧐

@autodocuk

Жыл бұрын

We do not have such information, we recommend that you consult your mechanic.

@jorjdegoatt1703

9 күн бұрын

you can fenagle out the disc without removing the caliper bracket.

So no need to adjust the parking brake after changing brake pads?

What do you call that 8mm hex key? Thanks

@autodocuk

6 жыл бұрын

Thank you for your feedback! It can be also called the allеn key. Best Regards, Autodoc

using a spanner on those hex bolts?. those bolts are rigid and u could never use just a spanner to loosen them. the bottom shocker bolt should be removed in the real world with a 3/8 power bar and 8mm Allen key with socket..

@autodocuk

7 жыл бұрын

Thank you for the feedback! Your opinion and remarks are very important for us. We will take them into consideration for our next tutorial. Best regards, Autodoc.

4:50 'Lubricate the brake caliper guide pins with special grease'... What 'special grease'? What would I ask for at my auto shop?

@autodocuk

5 жыл бұрын

Thank you for your feedback ! In this video we used special lubricant for support guides.Please, contact our support team, and be sure that we will check it for you. Best regards, Autodoc.

@iangraham6730

2 жыл бұрын

Copper grease.

@ClaimOfRightMuso

2 жыл бұрын

@@iangraham6730 Cheers, Ian. I reckoned that from around the time I asked 'autodoc' the question. Your reply was what I needed from them at the time, but unfortunately copper grease seems to be some closely-guarded secret of the trade: "special grease" "special lubricant" - why couldn't they just say 'copper grease' or 'lithium grease', 'red rubber grease' 'ceramic brake grease' or 'Mission Automotive Dielectric Grease/Silicone Paste/Waterproof Marine Grease'? 👍

@iangraham6730

2 жыл бұрын

@@ClaimOfRightMuso It's all about the 'sell' . . the less you know, the better for them ;-) I worked in a garage for the guts of 20 years, copper grease was the go-to for brake slides, actually silicone grease is probably better for the rubber dust covers sake, but I still prefer copper :-)