Your videos on the cast iron overlocker/serger is very helpful. I subscribed. During and after the pandemic, the population of students taking up dressmaking/tailoring exploded (K-12 Students, Young adults, Hobbyist and even Retirees/Senior Citizens, a lot of first time/beginners do not know anything about the sewing machine which they have just bought or acquired, much so the overlocker/serger, totally new in operating such a machine. I have viewed your videos on this topic you made several years ago. I hope you will update these overlocker/serger videos to be viewed in the current time. Thank you.

@ArtOfClay

Жыл бұрын

Oh, that's interesting to hear! Thank you for sharing it! I have already uploaded some of the videos for this machine as KZread shorts. I will think of how to present them better in a playlist or something. It's a great machine.

video of a yamato 5threat safety overlockers how to replace or sharpen the blade

@ArtOfClay

6 ай бұрын

I am sorry, but I don't have that specific model, so I can't provide a video demonstration on replacing or sharpening the blade for the Yamato overlocker.

Pls have tried to fix the blade but not working properly, on testing it, the edges àre not smooth or do I have to sharpen the lower blade? Thanks

@ArtOfClay

3 ай бұрын

Before sharpening the lower blade, double-check if both blades are properly aligned. From my experience, even a slight misalignment can cause issues with cutting the fabric properly. There is a nut on the side that can be loosened so you can move the whole blade mechanism closer or further away from the needle, so you may want to check if it is tightened. If none of this helps, then sharpening might be necessary.

Can the knives be sharpened it it's blunt please

@ArtOfClay

Жыл бұрын

Yes, the overlocker knives can be sharpened, but it requires the appropriate tools and skills. If I acquire the necessary knowledge, I will create a video demonstrating the process.

Thank you very much great video indeed! Fixed my problem. I would like to add though, I had to end up pushing the blade towards the presser foot and the actual still mechanism to the right hand side, separating them as much as possible whilst tightening the upper screw in order for my blades to be touching enough to cut! Hope this will help others too.

@moniquebree3425

Жыл бұрын

My machine is a 1930s Singer 81k.

@ArtOfClay

Жыл бұрын

Thank you for your kind words! I'm glad to hear that the video was helpful and that you were able to fix your problem. Your additional tip is valuable, and it's great that you shared it.

En dónde encuentro el porta hilos?

I have a similar model but it doesn't cut. What should be the problem? please help

@ArtOfClay

Жыл бұрын

I guess the knives are dull, or may not be installed correctly. Also, the presser foot may be installed too far away from the knives.

I tried it for the first time and it worked but during tying the pins it changed the move. And I tried several times but it failed to work again

@ArtOfClay

Жыл бұрын

It's frustrating when something that initially worked doesn't function as expected, even after multiple attempts. I understand your frustration. I hope you can soon adjust the knives on your machine to resolve the issue.

I would also l ike to add that I have seen videos calling this cast iron overlocker/serger kind that you have in your video a weaving machine, and I was amazed that instead of a motor, this kind of overlocker/serger/weaving machine is manual, it is operated using manual foot pedal on the overlocker/serger/weaving machine. Have you encountered anyone converting their motor powered into a manual pedal operating one? I am interested to know how to convert to save on electricity.

@ArtOfClay

Жыл бұрын

I haven't seen a converted one with a pedal. I have seen one with a flywheel that has a handle to it. But you have to spin the flywheel too many times to get the machine to sew fast. Just an idea, I think it can be easily made into a manual pedal one using (legs/lower metal part) from an old lockstitch sewing machine. Many people get rid of these old machines and the part with the pedal can be used to realize that idea. At least in the country that I live in, you can find a working machine with legs, and a pedal (all parts) for about 20-30 euros. You may need a custom size belt and a wooden board for the top.

@mcjose100

Жыл бұрын

@@ArtOfClay This girl has a 3 thread manual overlocker weaver ... kzread.info/dash/bejne/qot318-Ec7y8ctY.html

@ArtOfClay

Жыл бұрын

Oh, yeah. Thank you for sharing this. It looks like the lower part with the pedal is from an old sewing machine.

The best tutorial. I tried but the knife is not cutting.

@ArtOfClay

Жыл бұрын

Thank you for your feedback. I didn't make it perfect when I tried for the first time, so I also needed to readjust the knives. Does the knife cut the thread when you do the test (before mounting the presser foot)? If so, make sure the presser foot is not too far away from the knife because it has to hold/push the edge of the fabric. Otherwise, if you know that your knives are in good condition, make sure they are properly mounted. You may need to try to reinstall them. I don't know if any other adjustments are needed if all of these are set. I hope you can manage to fix them with ease.

@aggasheri06

Жыл бұрын

@@ArtOfClay thank you for the tip, i will try mine too since it was not cutting and respond to this.

@ArtOfClay

Жыл бұрын

I hope you will fix it easily.