All content creators please note: this here is how you make an instructional video.

@andy_w0ng

6 ай бұрын

Thank you for the awesome compliment. I am very humbled and honored by your comment

Thanks for taking the time to show us the Wong way to get this done!

@andy_w0ng

8 ай бұрын

LOL!!! Nothing Wong with your comment! Total cool 😂😂👍

Excellent instructional video! Well done sir!

@andy_w0ng

4 күн бұрын

Thank you.

Excellent video and showing things a dealer/shop will never do, like correct torque, wiping things off, oil plug washer.

Everything you did was very properly done and that is why I am surprised that you purposely overfilled the oil capacity by 20%. Why would you deviate from factory specs? Since the motor most likely doesn't use oil, although overfilling may cause the start of oil consumption, it is running overfilled til next oil change. The term "max" means what it says.

Thank you for this straight forward no nonsense video🙏

Nice job. Thank you!

I would change engine oil soon, in reference to your video, thanks!! nike work!

Great step by step video!

@andy_w0ng

8 ай бұрын

thank you 😃

Excellent video!!! Very helpful. Thanks!

@andy_w0ng

6 ай бұрын

thank you. and also thank you for watching and commenting on my video 👍

Awesome video

@andy_w0ng

Жыл бұрын

Thanks man 👍

I do the same thing as you but I jack up both the front and back so no old oil can be stuck since the car is tilted backwards. I also use Mobile 1 but the regular synthetic not the hybrid model.

Can you make transmission/differential oil change video?

Great 👍

Question: have you tried that, after you drive on the ramps, to raise the rear on the jacks first and then the front? You would need to raise it less (vs the front), as the front is already on the ramps.

Amazing video. Very thorough. The only thing you didn't show that I wish you had is where you put the rear jack stands. I assume there are two notches to put the jack stands between, back there also, along the pinch weld.

@andy_w0ng

3 ай бұрын

Thank you for the feedback @mrspeeddemon727. Yeah, i realize that part after i uploaded and posted the video lol. But yes, you are correct. There are two notches that indicates where the pinch weld is to place the rear jack stands. On my next video when i do a wheel wash and detail, i'll show it lol.

I think my '22 has a smaller access panel in the skid plate.

Thank you it was very helpful. Can you provide a link to oil filter removal tool.

@andy_w0ng

11 ай бұрын

hey sorry for the late reply. thank you for the like and comment. I got mine from Auto Zone. But here a 2 links that has them: amazon and advance autos has it Amazon: www.amazon.com/Lisle-63250-Range-Filter-Wrench/dp/B0002SR4PY/ref=asc_df_B0002SR4PY/?tag=hyprod-20&linkCode=df0&hvadid=312064691975&hvpos=&hvnetw=g&hvrand=7711846897546536498&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1026271&hvtargid=pla-440428293589&th=1 Advance Auto Parts: shop.advanceautoparts.com/p/lisle-import-car-oil-filter-wrench-63600/25981259-p

Great instructional video! Andy, did you paint the lower aero pieces yourself or outsource? If yourself, how did you do it?

@andy_w0ng

3 ай бұрын

thank you for the feedback and compliment @christophercornell4086! I had my local shop that does wraps to do it for me lol. Depending on where you live, I'm here in dallas texas and it cost me $150. A place called "Fortune Wraps". They also have a youtube channel www.youtube.com/@fortunewraps

Pro tip: Fill the filter with new oil before installing, and use ATF to lube the ring, not engine oil.

@andy_w0ng

2 ай бұрын

I’ve heard of that process before. Thank you for the pro tip 👍👍

Dude those driving lamps are sweet I need a link for that!

@andy_w0ng

4 ай бұрын

Sorry for the late reply lol. Here's the link to where i purchased it: www.carbonmiata.com/shop/mazda-mx-5/nd-15-mazda-mx-5-mazda-mx-5/exterior-parts-nd-15-mazda-mx-5-nd-15-mazda-mx-5-mazda-mx-5/grilles/spyder-grille-lights/

New washer ?

Peccato che ti stia in Texas, se tu fossi in Italia il tagliando lo farei fare a te. Complimenti strepitoso

@andy_w0ng

5 ай бұрын

I had to use Google Translate lol. Thank you for the awesome compliment 😄

Very good video, thanks :) what torque would you recommend for the skid plate screws? something like 12-15nm?

@andy_w0ng

Жыл бұрын

hey Digi20. that is a great question and thank you for the like and comment. not many people wonder about that and sorry for the late response you can tighten these nine bolts in a few different ways. 1. air ratchet 2. battery operated ratchet (as seen used in this video) 3. manually. so, with that said, if you're planning to use method 1 & 2, make sure its a 3/8 ratchet. You won't need to worry about torque specifics. Those power tools will give enough torque to secure all 9 bolts. With power tools, you can zip by them so fast and possibly miss one or two. Thats why i go over each bolt to ensure they are ALL FASTENED and i did MISS ONE lol IF you're going to be using method #3, which will be a hand held ratchet, the torque specification will be 24 - 28 ft/lbs (or 32.5 Nm - 38Nm) IF you don't have a torque ratchet, you can apply roughly 10-15 degree turn rule (or 1/16th of a turn) after those bolts are fastened. That should apply close enough torque with that method. Same method i used for the oil drain plug @ frame 08:59. Hope that answers your question.

@stevederosa1655

Жыл бұрын

snug lol just kidding, as per mazda it says 24-28 ft lbs OR 32-38 NM for the lower shield bolts

@andy_w0ng

Жыл бұрын

@@stevederosa1655 you say "potatoes" i say patatoes lol. Honestly, thank you for the great info. 👍

Nice touch organge sticker. How do you do that pls and thanks

@andy_w0ng

Жыл бұрын

i had a local vinyl wrap shop applied that onto my aero kit 😅. It was about $200. i'm not sure how much it would cost at your local vinyl shop. I wouldn't think it would be too much of a cost. after watching how it was applied, this could had been a manageable DIY for me but i don't have all the right tools. They had to take apart the front splitter, side aero kit and rear diffuser and thoroughly clean it before applying the wrap. It was more of a Red-ish Orange color. I hope this helps my friend 😅

How do you like that Spyder Foglight Grille? I’ve been thinking about getting one for my car but haven’t really seen any good videos or anything on them.

@andy_w0ng

6 ай бұрын

DUDE! IT IS AMAZING!!! Me personally, ITS WORTH IT! If you don't mind the hassle of raisingg the front end and removing the entire front bumper to install it and running the wires and control switch into your Miata. I opted for the regular cool blue instead of the cool blue and yellow. I did film my process of removal and installation. But never got the chance to edit the videos to post it. Now that you asked, i'll do my best to have it edited and post it someday soon! There are two videos i would suggest to watch so you can get an idea what the level of installation is like. I would say it's MEDIUM. Nothing too hard. It took me 2 - 3 hours to complete. I was a automotive mechanic in the past for 15yrs and had all the tools to do the installation, so...with that said, this wasn't too bad for me. I would suggest to watch these two videos. One by @driveMX5 (drivemx5.com). His tutorial is just the regular grill w/o the fog lights. BUT VERY VERY HELPFUL in installation guide. He's also a Miata fanatic! Video 1: kzread.info/dash/bejne/lKmn1dxmmLbYfag.html the other one is by @carbonmiata2012 I think this is the company that made the grill with the fog lights. In there video, its more of like a timelapse of ther installation including running wire harness but not as in full detailed of how to remove and instal the grill. kzread.info/dash/bejne/gKyMk5OoaNbbmrQ.html Hope my response help and along with those two videos. Feel free to reach out for any questions. I would love to help and answer as best to my knowledge. Thank you for watching my video!!!

What ramps are those? I like how low profile they are as like you did in you video, I just need them to get to the front subframe with my jack and not test my rock crawling capabilities in my Miata.

@andy_w0ng

Жыл бұрын

Hey Will. Yes. They are low low profile ramps by: Discount Ramps Low Profile Plastic Car Service Ramps - 2 Pack I got them on amazon. At the time it was $42.99 for 2 Pack. Its every sturdy and durable. Doesn't slip or slide. The awesome thing about these ramps is that it has a divot at the front for tire stops to ensure that your vehicle is properly positioned on the ramp. ALSO, feature hollow honeycomb channels to prevent moisture from building up Here's the link if you're interested, here's the link: www.amazon.com/gp/product/B00UHLPES0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Yeah, these ramps will give you plenty of clearance for your jack to get underneath the subframe. DUDE! you take your Miata rock climbing??? That's AWESIME!!! lol Thank you for watching my video and comment.

@whechi

Жыл бұрын

@@andy_w0ng no I have a land cruiser for rock crawling 😁 On that note I will not be putting my 6,000lb Land Cruiser on those $40 ramps lol perfect for the sub 2,400lb Miata

Where did you buy your front grille and fog lights? Thank you

@andy_w0ng

6 ай бұрын

you're welcome and thank you for watching and commenting on my video 👍 i bought it from Carbon Miata. Here's the link if you wanna check it out: www.carbonmiata.com/shop/mazda-mx-5/nd-15-mazda-mx-5-mazda-mx-5/exterior-parts-nd-15-mazda-mx-5-nd-15-mazda-mx-5-mazda-mx-5/grilles/spyder-grille-lights/ i opted to get the "Regular Halo Ring" instead of the "Dual Color Lights" Let me know if you have any questions i can help with

Just get taller ramps and you won’t need the jack and jack stands, and it’s a lot safer to be under the car.

@andy_w0ng

Жыл бұрын

I agree and had initially thought about that but then, i don't feel comfortable with the ramps being next to me on both sides. All four of my jack stands have lock pins to prevent failure.. Thank you and greatly appreciate the suggestion-

@centripetal25

8 ай бұрын

@@andy_w0ng What I do is use tall ramps, but still use wheel chock and jack stands as backup on the weld seem or the suspension arms.

Why did you remove the oil filter first instead of the plug?

@andy_w0ng

Ай бұрын

that's a GREAT question Alex. As a former car mechanic (and its just my preference). It is less messier to deal with if you replaced the oil filter first. 1. You don't have to worry about dropping the oil filter into a pan full of used oil and have to fish it out later 2. SPLASH prevention 3. don't have to move around a pan full of oil and causing spills/mess to clean up later. and LAST, you don't have oil dripping from the drain plug side while removing and installing new oil filter we all know, accidents happens. BELIEVE me. I made many of those in the past lol. hope that answers your question Alex and thank for the great question.

@tomb.4171

28 күн бұрын

@@andy_w0ng Very good tip and comprehensible reasons 👍

hi, what Mobil 1 did you use? can you send link? Thanks bro!

@andy_w0ng

10 ай бұрын

if you own a ND Miata (2016 and up) it requires a 0W20. It also states it on the oil cap. with that said, I get mine from wal-mart which is the Moile One Advance Fuel Economy but I buy the oil filter from Mazda dealer. Often time, a new drain plug washer will be included. If not, its only an extra $2 or $3 dollars. Its always a great idea to replace those washers every oil change. Hope this helps. Please feel free to reach out for more questions. thanks for the comment and checking out my video.

@leonardovalanzano8922

10 ай бұрын

@@andy_w0ng thanks!

Salut. Est-ce le moteur 2 litres ?

@andy_w0ng

7 ай бұрын

Yes. It's a 2.0Litre 4Cyl 6 speed manual 😀

It says on google 4 quart????

@andy_w0ng

10 ай бұрын

With oil filter replacement its 4.3 L (4.5 US qts) Since I buy the 5 quart container, that left over .5 won't hurt the engine. Hope that makes sense lol

Why would you intentionally overfill the oil by a half quart???? Overall, video was great,absent the overfill

@andy_w0ng

10 ай бұрын

With oil filter replacement its 4.3 L (4.5 US qts) Since I buy the 5 quart container, that left over .5 won't hurt the engine.. Hope that makes sense to you and i do appreciate the questions and feed back 👍

@adamsteele6148

9 күн бұрын

​@@andy_w0ngDon't over fill the engine that's just stupid and a quick way to blow seals