How to change front wheel bearing on OPEL ASTRA H Saloon [TUTORIAL AUTODOC]
Автокөліктер мен көлік құралдары
How to change front wheel bearing / hub bearing / wheel bearing kit on OPEL ASTRA-H 3 (L69) 1.6 Saloon 2007-2014 [TUTORIAL AUTODOC]
Wheel bearing on OPEL Meriva B (S10) (06.2010-03.2017) / OPEL Zafira B (A05) (07.2005-04.2015) / OPEL Zafira B Van (A05) (07.2005-04.2015) / OPEL Astra H Caravan (A04) (08.2004-05.2014) / OPEL Astra H Hatchback (A04) (01.2004-05.2014) cars should be changed, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AUTODOC - interstitials.onelink.me/1036...
⚡ All video and PDF tutorials on replacing OPEL ASTRA H parts: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/op...
❱❱ Install the AUTODOC CLUB - club.onelink.me/d2X8?pid=yout...
🛒 Visit our website: www.autodoc.co.uk/?...
Wheel bearing: www.autodoc.co.uk/car-parts/w...
Wheel bearing for OPEL ASTRA-H (L69) : www.autodoc.co.uk/car-parts/w...
LIQUI MOLY Chain Spray: www.autodoc.co.uk/liqui-moly/...
LIQUI MOLY Fast Cleaner: www.autodoc.co.uk/liqui-moly/...
WD-40 Grease Spray: www.autodoc.co.uk/wd-40/13563...
MOBIL Grease: www.autodoc.co.uk/mobil/90020...
🔔 Subscribe to the AUTODOC channel so that you don't miss the latest videos on car parts replacements ➜ kzread.info?s...
00:00 - OPEL ASTRA H - wheel bearing / hub bearing / wheel bearing kit: step-by-step changement tutorial
00:33 - Unscrew the wheel bolts.
01:53 - Clean the brake disc fastener.
02:19 - Detach the ABS sensor connector.
03:22 - Clean the wheel hub fastener.
03:48 - Remove the hub and the bearing together, since they are a sealed unit.
04:27 - Install the new wheel hub with a bearing.
05:38 - Install the drive shaft.
06:37 - Attach the ABS sensor connector.
06:55 - Install the brake disc.
07:26 - Tighten the brake caliper bracket.
08:02 - Screw in the wheel bolts.
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► OPEL car repair tutorial - • OPEL car repair tutori...
► OPEL ASTRA H car repair tutorial - • OPEL ASTRA H car repai...
► How to change ignition coil on OPEL ASTRA H Saloon - • How to change ignition...
► How to change glass for wing mirror OPEL ASTRA H Saloon - • How to change glass fo...
Mobile shop: m.autodoc.co.uk/?Y...
📢 AUTODOC on social media:
Instagram: autodoc_auto...
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZread: / autodocuk
TikTok: / autodoc.eu
#autodoc #autodoctutorial #autodoctips
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2021 AUTODOC GmbH All rights reserved
Пікірлер: 41
Did you notice that our mechanic made a mistake? Let us know in the comments what the mistake was and when you noticed it 💬
@branimirpodboj
2 жыл бұрын
From 7:08 he was spraying bolt head with cooper grease not the threads.
@autodocuk
2 жыл бұрын
Our viewers are so observant! The correct answer: The steering knuckle is not jacked up at 3:00
@chrisfromukyt
2 жыл бұрын
@@autodocuk So how is it supposed to look or be done? How is it to be jacked up, am I going to cause damage by not "jacking it up"? Please explain.
@piotrb6579
5 ай бұрын
Wrong torque for hub bolts, instead of 71nm should be 90nm + 45degrees. Driveshaft nut should be tightened 150nm -45degrees then 250nm
By far, the best walk throughs on KZread. No cut corners atall.. This made it easy for me to follow along and do it myself.
Wonderful job! Even the tightening torques in Nm are shown
@autodocuk
2 жыл бұрын
Thank you for sharing your opinion!
Great job and easy to follow
It's very beautiful
Good 👍👍👍
Why you not use firt the air impact for wheel and central bolt ?
Ottima spiegaziome
@autodocuk
Жыл бұрын
Siamo contenti che i nostri contenuti ti piacciano!
Is it enough torque the driveshatf nut to 165nm? 7:30 Somewhere i heard the factory manuals are, 150nm then 45degrees and 250nm. So which one is correct?
@autodocuk
Жыл бұрын
The correct moment value is 250 nm.
Hello everyone. Can someone tell me what the wire coming out of the bearing is for? I assume that it is some kind of sensor, but for what?
@autodocuk
Жыл бұрын
In this case, it is the wire from the ABS sensor.
Never seen someone use so much copper grease
Jó nektek csakugy leesik nekem azért kérte avésőt meg a 🔨
@autodocuk
Жыл бұрын
Tisztelet nézzünk, Köszönjük a megjegyzését A videó csak tájékoztató jellegű és emiatt azok a részek ami egyértelműen nyilvánvalók ki vannak hagyva, hogy rövidebb legyen. Tisztelettel AUTODOC csapat.
He didnt torque it to the required spec ( 77nm)
Incorrect method of replacement. The steering spindle did not need to be removed from the strut. Invest in proper tools to do the job properly without unnecessary steps.
@Strange_92
Жыл бұрын
Well, sometimes it helps to have less stuff in the way, even if it is unnecessary to move that stuff out of the way.
@ridds777
Жыл бұрын
@@Strange_92 work smart, not hard.
@Strange_92
Жыл бұрын
@@ridds777 exactly.. sometimes it's just smarter to remove some stuff out of the way, if possible. Not too much, obviously.. I work on my own car, as I have enough knowledge, I got a vocational education on this stuff. I'm not saying that I'm the best mechanic, but I do know stuff.
@ridds777
Жыл бұрын
@Strange_92 removal of unnecessary parts is a waste of time. If your time is not valuable to you, then that's on you...
@Strange_92
Жыл бұрын
@@ridds777 depends on what you remove.. and when I'm working on my own car, I'm not doing it on such a hurry. Not too slow either...