How to change Front Suspension Arm on MITSUBISHI COLT Z30 TUTORIAL | AUTODOC

How to change Front Suspension Arm / Front Wishbone / Front Control Arm on MITSUBISHI COLT Z30 TUTORIAL | AUTODOC
Top brands that produce Suspension Arm: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036709825?pid=KZread
On our website you will find a wide range of auto parts you are interested in: goo.gl/UndjqG
Suspension Arm: goo.gl/6YCShM
Suspension Arm for MITSUBISHI: goo.gl/cZXPRV
Suspension Arm for MITSUBISHI COLT VI: goo.gl/dVFE1n
MITSUBISHI Car parts: goo.gl/BGowS6
Mobile Shop: m.autodoc.co.uk
► How to replace Front stabilizer link on MITSUBISHI COLT Z30 - kzread.info/dash/bejne/X35ts5J_oLTWYLQ.html
► How to replace spark plug on MITSUBISHI COLT Z30 - kzread.info/dash/bejne/Y3eW26WFpLDcprg.html
► How to replace Air Filter on MITSUBISHI COLT Z30 - kzread.info/dash/bejne/moeOt7R-cteTeMo.html
📢 AutoDoc in social media:
Facebook: autodoc.co.uk
Twitter: autodoc_berlin
KZread: kzread.info
Instagram: autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/garage&reg-modal=true
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=youtube-disc

Пікірлер: 17

  • @georgevarteniuc5525
    @georgevarteniuc55252 жыл бұрын

    Very helpful video. Saved me hundreds of £££

  • @jonpaxton9746
    @jonpaxton97464 жыл бұрын

    Can you do the final tightening of the wishbone bolts on ramps or does the car have to sit level on the ground? Very good video clear and concise made my job a lot easier!

  • @jamisonkhalil6752

    @jamisonkhalil6752

    2 жыл бұрын

    instaBlaster

  • @micheldevries6870
    @micheldevries6870 Жыл бұрын

    The gap between the top of the threaded nut of the lower ball joint and the bottom of the cv joint housing is only 7mm. The ball joint puller I have is very similar to the one in this clip and it does not fit in that gap. In the first wide shot the mechanic is bringing in the puller upside down. In the second close shot it is the right position but that thick piece of metal of the puller can't possibly fit in that gap. And in the video you indeed don't actually see the puller fitted. So how did you guys of autodoc actually release that ball joint?

  • @AutoManuals
    @AutoManuals8 жыл бұрын

    Very useful video.

  • @autodocuk

    @autodocuk

    8 жыл бұрын

    Thanks for watching ! Don't forget to subscribe!

  • @polomen24
    @polomen244 жыл бұрын

    Can you send me the link of the tool?

  • @marekondros9307
    @marekondros93074 жыл бұрын

    Do I need to do a wheel alighment after this procedure?

  • @autodocuk

    @autodocuk

    4 жыл бұрын

    Thank you for your comment! Yes, it is recommended to do a wheel alighment after this replacment. Best Regards, Autodoc Team.

  • @chewie3397

    @chewie3397

    4 жыл бұрын

    Yes buddy

  • @sebastiansebastian8880
    @sebastiansebastian88804 жыл бұрын

    Sorry what is the tps sensor and what is it for, is that my car alters the rpm

  • @autodocuk

    @autodocuk

    4 жыл бұрын

    Thank you for your comment. This sensor signals the driver about a decrease in pressure in the wheels of the car. Best Regards, Autodoc team

  • @MitsuFishY
    @MitsuFishY5 жыл бұрын

    FYI - Mitsubishi state that you fully tighten the wishbone to subframe bolts with the car on its wheels, otherwise you can introduce torsional forces in the bushes.

  • @autodocuk

    @autodocuk

    5 жыл бұрын

    Thank you for your feedback. You are absolutely right, the control lashing of the suspension mounts is carried out when the machine is on wheels under its own weight.Best regards, Autodoc!

  • @sebastiansebastian8880
    @sebastiansebastian88804 жыл бұрын

    change mitsubishi colt gasoline filter

  • @autodocuk

    @autodocuk

    4 жыл бұрын

    Thank you for your comment. We kindly ask you to clarify or rephrase your question. Best Regards, Autodoc team

  • @sebastiansebastian8880

    @sebastiansebastian8880

    4 жыл бұрын

    How to change the fuel filter of that car

Келесі