Please keep going for Opel astra G

Thanks, need to do this before next mot ,may try to do myself however how much time should a garage need to do this if I need ti get them to do it ? thanks .

@autodocuk

6 жыл бұрын

Thank you for the feedback! It may take from 40-60 min for the side. Best regards, Autodoc

Very nice and clean video, thanks. I'm wondering how much pain would be compressing spring without special tool :)

@autodocuk

7 жыл бұрын

Thank you for the feedback! We are glad that our tutorial was useful for you. Best regards, Autodoc.

@grab3

7 жыл бұрын

Endless, crystallized pain :)

Does anyone know if the top part has rubber where the screw goes? We had to heat it up to get the nut off?

@autodocuk

6 жыл бұрын

Thank you for the feedback! Please, specify the car part you meant and the minute in the video where it is shown. Best regards, Autodoc.

Is the top mount clocked (i.e. Does it have to sit a certain way) love these videos so much information on how to

@autodocuk

7 жыл бұрын

Thank you for the feedback! Could please specify, what exactly do you mean? Best regards, Autodoc.

@faroukkhelilcherfi1684

6 жыл бұрын

Thank you Autodoc for this video. Actually I was a bout to ask the same question. I think turn it one way or another would affect the camber angle. Is that true? I notice a negative camber in the same car model and the shock ascorber mount is the only part that would affect the camber angle in my opinion.

@tonylitherland7830

5 жыл бұрын

Top mount is handed the cutout on mount faces front on one side and rear on other side, check which way before disassembly.

guter arbeit

@autodocuk

7 жыл бұрын

Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

Help please How do line up the top mount bearing? There's a cut out bit to line up. I didn't check before disassemble and now don't know how to line it up because the mount has a slight angle on.

@autodocuk

2 жыл бұрын

Hi! Unfortunately, we do not have such information, we recommend that you consult with your mechanic.

@0121jason706

Жыл бұрын

Hello mate, did you find out how to do this. I’ve done mine but wasn’t sure and got a knocking from shock area both sides

Are impact sockets being used thought they were black in colour ?

@autodocuk

6 жыл бұрын

Thank you for the feedback! The impact sockets in the video might have been used. We use the impact sockets produced by different manufacturers, that's why the colour may vary. Please note, that this video tutorial only shows the sequence of repairs, without specifying all technical nuances. Best regards, Autodoc.

Nu inteleg de ce nu ai schimbat si flansa aia ca e varza. Macar pentru videoclip

@autodocuk

5 жыл бұрын

Buna ziua, va multumim pentru recenzia Dvs. Cu stima Autodoc!

Is a very stupid mechanic because he forgot to put the rubber ,that was in the old mount, ring between the spring and the top mount.

@autodocuk

6 жыл бұрын

Thank you for the feedback! This video is considered to be an informative one, and it shows the sequence of repairs, so some stages of the repairs might have been excluded. Best regards, Autodoc.

bi boka yaramiyo be aynı sert süspansion