I am changing drive belt for my scooter Yamaha Xmax 250cc.
Жүктеу.....
Пікірлер: 24
@4x4quadbike3 жыл бұрын
Brilliant video! I learned a lot. Thanks for sharing 😁
@johnnicholls30922 жыл бұрын
I likes the video , but I would not have put grease on the sliders because surely the dust will will turn it to goo and then its operation will be come sticky
@steven.ghodgson765 Жыл бұрын
good video - very practical for the home mechanic - thanks
@HeduinoRodrigues3 жыл бұрын
Very nicely explained
@ALTO7730 Жыл бұрын
The Rollers must be greased I have the original Manual needs to be greased with NLG2 grease.
@johnnicholls30922 жыл бұрын
Well I take it all back sort of ! I have just done the belt and rollers on my 2013 x max I had it from new so no one has touched it but it had plenty of grease on the sliders and some contamination on the rollers when taken apart , so maybe I was wrong with my previous comment about not putting grease on the sliders . However rightly or wrongly I put the new rollers and sliders back dry with no lube just saying lol
@steveburrowscbr
7 ай бұрын
quick question, I swapped my rollers, sliders and belt on my xmax 250 yesterday. The variator was covered in grease, I cleaned it and put new rollers in dry, and it is running smoothly. Checking the Yamaha workshop manual the rollers should be greased. Now not sure if I should diassemble and grease or leave them dry? How long did your dry rollers last?
@MujoNovak3 жыл бұрын
For my 2014 xmax 250 says 14g roller weights... but when I put it on scale it was just 12g. Just like yours. So I ordered again. Damn wrong data everywhere.
@asteriosmantas6937 Жыл бұрын
it's very nice video ,you helpd me a lot, also can you tell me which diameters has this controller rollers (like 20x12 and 12gram) ? thanks a lot
@jerzyrewilak398910 ай бұрын
Thanks for help
@Raf301702 жыл бұрын
Very good
@Goldgamesarena2 жыл бұрын
Very good job thanks 🙏
@andriusrudprojects5153
2 жыл бұрын
You’re welcome 😊
@warren86013 жыл бұрын
👍
@Weyni775 ай бұрын
Well done,how many km's is on your xmax ?All and all 2024
@leiladaquil65872 жыл бұрын
sir how wide is the drive belt?30mm or 32mm?
@andriusrudprojects5153
2 жыл бұрын
Don't remember. Sorry
@critterIMHO2 жыл бұрын
While not overly complex, that doesn’t look like something I would want to do on the side of the road. PS: Why not just use a pod style air filter and throw all that ugly plastic in the wheelie bin.
@petepython012 жыл бұрын
Not very careful
@igorantunovic50413 жыл бұрын
this video shows how not to do
@andriusrudprojects5153
3 жыл бұрын
???
@MujoNovak
3 жыл бұрын
pejd doma cefur
@AndrejMatkovic-nu7bn Жыл бұрын
Dude that's horrible, you'll screw up all the bushings and the variator like that
Пікірлер: 24
Brilliant video! I learned a lot. Thanks for sharing 😁
I likes the video , but I would not have put grease on the sliders because surely the dust will will turn it to goo and then its operation will be come sticky
good video - very practical for the home mechanic - thanks
Very nicely explained
The Rollers must be greased I have the original Manual needs to be greased with NLG2 grease.
Well I take it all back sort of ! I have just done the belt and rollers on my 2013 x max I had it from new so no one has touched it but it had plenty of grease on the sliders and some contamination on the rollers when taken apart , so maybe I was wrong with my previous comment about not putting grease on the sliders . However rightly or wrongly I put the new rollers and sliders back dry with no lube just saying lol
@steveburrowscbr
7 ай бұрын
quick question, I swapped my rollers, sliders and belt on my xmax 250 yesterday. The variator was covered in grease, I cleaned it and put new rollers in dry, and it is running smoothly. Checking the Yamaha workshop manual the rollers should be greased. Now not sure if I should diassemble and grease or leave them dry? How long did your dry rollers last?
For my 2014 xmax 250 says 14g roller weights... but when I put it on scale it was just 12g. Just like yours. So I ordered again. Damn wrong data everywhere.
it's very nice video ,you helpd me a lot, also can you tell me which diameters has this controller rollers (like 20x12 and 12gram) ? thanks a lot
Thanks for help
Very good
Very good job thanks 🙏
@andriusrudprojects5153
2 жыл бұрын
You’re welcome 😊
👍
Well done,how many km's is on your xmax ?All and all 2024
sir how wide is the drive belt?30mm or 32mm?
@andriusrudprojects5153
2 жыл бұрын
Don't remember. Sorry
While not overly complex, that doesn’t look like something I would want to do on the side of the road. PS: Why not just use a pod style air filter and throw all that ugly plastic in the wheelie bin.
Not very careful
this video shows how not to do
@andriusrudprojects5153
3 жыл бұрын
???
@MujoNovak
3 жыл бұрын
pejd doma cefur
Dude that's horrible, you'll screw up all the bushings and the variator like that
Very good