How To Change A Window and Motor Regulator On A Ford Mustang
Тәжірибелік нұсқаулар және стиль
Disclosure, these are amazon affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting Welding and stuff so I can continue to provide you with free content!
Help support my videos by pledging $1 per Month - Cancel Anytime / weldingandstuff
Dorman 741-127 Front Passenger Side Power Window Regulator and Motor Assembly amzn.to/2MJJu8k
Dorman 741-126 Front Driver Side Power Window Regulator and Motor Assembly amzn.to/2KZcjeK
Cardone 42-331 Remanufactured Domestic Window Lift Motor amzn.to/348eaFJ
Cardone 42-330 Remanufactured Domestic Window Lift Motor amzn.to/2Zv1uZN
Amazon Ford Mustang Parts www.amazon.com/shop/weldingan...
Ford Mustang used cars for sale rover.ebay.com/rover/1/711-53...
Subscribe To My Channel goo.gl/98AvoB
Get more views and subscribers by installing TubeBuddy www.tubebuddy.com/weldingands...
For business inquiries: weldingandstuff@gmail.com
Visit My Website www.weldingandstuff.net
Follow us on facebook / weldingandstuff
Follow us on twitter / glewis2019
TubeBuddy is a powerful browser plugin that will save you time & money, boost your video performance and help you engage with your audience. Free download at www.tubebuddy.com/weldingands...
Thanks for watching! ♥ ♥ ♥
Disclosure, these are amazon affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting Welding and stuff so I can continue to provide you with free content!
#FordMustang
#HowTo
#DIY
Пікірлер: 88
Dorman 741-127 Front Passenger Side Power Window Regulator and Motor Assembly amzn.to/2MJJu8k Dorman 741-126 Front Driver Side Power Window Regulator and Motor Assembly amzn.to/2KZcjeK Cardone 42-331 Remanufactured Domestic Window Lift Motor amzn.to/348eaFJ Cardone 42-330 Remanufactured Domestic Window Lift Motor amzn.to/2Zv1uZN
@whitecastle323
3 жыл бұрын
I replaced the window switch but it wasn't the switch, it makes a clicking sound in the door when I push the switch, what could it be? It's a 99 mustang
@dcbwill6809
3 жыл бұрын
The The only one ☝️ the the best bet bet you you could get the money 💴 for for ya ya ya ya ya ya ya ya know
@sullivancrosby1132
2 жыл бұрын
I dont mean to be so off topic but does someone know a trick to log back into an instagram account?? I somehow lost my account password. I would love any tricks you can give me
@maddoxtyson8077
2 жыл бұрын
@Sullivan Crosby instablaster :)
@sullivancrosby1132
2 жыл бұрын
@Maddox Tyson Thanks so much for your reply. I found the site on google and I'm waiting for the hacking stuff now. Seems to take quite some time so I will reply here later with my results.
This is the video I needed! I don’t comment or upvote a lot, but this made it wayyyyy too easy to understand, I needed a way to pull the window out and I see exactly how to do it now! Hell yeah
@weldingandstuff
6 ай бұрын
Cool
Thank you thank you thank you! I did it. I just had to come back to tell you how much time and work you saved me!
@weldingandstuff
3 жыл бұрын
Glad the video was of help
You made this look so easy. Easy if u know what ur doing like yourself. Valuable info on what parts to use and steps to complete. My shop must have used the first regulator/motor combo you said not to use- they really messed it up. Wish i would of fixed it myself instead of taking to a shop.
Thank you so much for this vid man, I was scrambling and ask my friends and family to get Drill to Drill out the rivers, way easier to just keep the old one since it’s fine.
Followed step by step just to remove and diag my own issue on the driver's side. I got a burnt motor and a bent track. God I love ford
Props to you bro, your skills on 100, you did that so playa with it
Nice job. Clear and easy to follow. Certainly made my job a lot easier. Thanks
@weldingandstuff
5 жыл бұрын
you are welcome
Thanks for this. About to replace the motor on my passenger window as well :D
Thank you, sir, for a very informative video!
Great Job, Excellent video. Thanks Brother, God Bless!
Ty for this video .Big help.showed everything.
This was a really good video
Thank You so much for pointing out the difference in the two window regulators..I had ordered a set and couldnt get the regulator holes to line up,not to mention the wire wasnt long enough to plug the connector back in..I just ordered the dorman model you posted with the two links to amazon..Thanks again to your video.
@weldingandstuff
7 ай бұрын
Glad I could help
Thank you so much! now I can do the same on the 98 mustang i just got
Please can you tell me if there’s supposed to be something on the left of the bracket the window is on similar to the one on the right?
Excellent video. Nice work
@weldingandstuff
4 жыл бұрын
+John Keith appreciate it
Hey bro. Great work! To remove the window since my window busted from a rock. Am I able to remove the window after removing motor regulator? What's easier way?
THANK YOU SO MUCH FOR THE HELP
@weldingandstuff
5 жыл бұрын
+david galeski you are welcome
This went WAY too smoothly for you. I had the hardest time with this. Im gonna have to give it another shot in the morning
@betoski
Жыл бұрын
hahah Never give up!
Did the window stay up by itself or did you have to tape it/hold it while working on it
I have this problem with my 04 mustang the window will not roll down i replaced the switch nothing i replaced the motor and it work for 2 days then stopped but I can take the motor out and put it back in and it works again for a few days thinking I need to replace the regulator thinking it may have some broken teeth on it....Thanks for the video fixing to go buy the part and try it out
Damn that was quick! Would you recommend dorman or cardone parts?
Thank you for keeping it simple. I have 2 of these to get done.
@weldingandstuff
4 жыл бұрын
Help support my videos by pledging $1 per month - you can cancel your pledge at anytime www.patreon.com/weldingandstuff
Thx
Did you have to mess with the bump stops ?
Where can I find colored panels like this?
I'm going to attempt this tomorrow. My window is stuck down however. Will that be an issue? And how is yours staying halfway up with the regulator out?
@weldingandstuff
5 жыл бұрын
Pendragon1989 I have a screwdriver inserted in one of the holes holding it up
Good video, but mine has rivets in 4 places. How did you remove them the first time? Thanks
@weldingandstuff
4 жыл бұрын
Drill the out and replaced with screws
How does this help change a window at all?
My window goes down centemiters at a time i gotta click it like 20 times to get it all the way down with the help of my hand on the window as well,but it goes up fast with no effort in one click?? What could it be? Thanks for the video
@weldingandstuff
5 жыл бұрын
Braulio Neri best to change the motor and regulator
What years that vehicle and thank you for the video?
@weldingandstuff
4 жыл бұрын
1995. Help support my videos by pledging $1 per month - you can cancel your pledge at anytime www.patreon.com/weldingandstuff
What year is the car .?
I need sum help
Someone cracked my passenger window, to swap it just lift it up after disconnecting the regulator arm?
My window broke on my 05 mustang am I gonna have to do this same process?
@smileswithease
3 жыл бұрын
Its a different looking regulator i think
@bizzaromicky71
3 жыл бұрын
@@smileswithease yea I fixed it bro thanks
Should I order online or go to my local auto zone?
@weldingandstuff
5 жыл бұрын
Michael Flores call AutoZone and see if they have one. If they have one remove your old one and take it with you to AutoZone and make sure they match up
I have a 2001 gt. My drivers window won't go down at all. Im going to assume it's the motor right?
@weldingandstuff
6 жыл бұрын
Tmas Snake yes it's the motor. Do it make any noise at all
@mentkansley502
6 жыл бұрын
Welding and stuff not a sound. The switch will click but after that nothing
@weldingandstuff
6 жыл бұрын
change the motor and regulator; it comes as an assembly www.weldingandstuff.net/window-motor-and-regulator
@Carlos-hr9kg
5 жыл бұрын
It’s most likely something electrical if there is no noise at all. Like a blow fuse or a bad relay, or one of the connections isn’t putting power through.
I want to do this but beforehand, I want to know if it's the motor or the switch, when I click the button for the window it makes a noise and the window just stopped letting down at random one day without indications that the motor was going bad. I dont think it's the motor.
@weldingandstuff
5 жыл бұрын
Got Bunnies change the actuator and motor. Yours doing exactly what happened to mine
@weldingandstuff
5 жыл бұрын
Got Bunnies get the dorman brand look in my description for the links
@jft2nd
5 жыл бұрын
@@weldingandstuff thank you for this
@jft2nd
5 жыл бұрын
@@weldingandstuff is the actuator with the motor?
@weldingandstuff
5 жыл бұрын
Got Bunnies yes
that you used to unscrew those weird screws?
I was trying to see if you want to come and fix my window on the driver side door
@weldingandstuff
5 жыл бұрын
Kentryle Teagues if you are in Houston I will help you fix it; it’s really easy to do
@weldingandstuff
5 жыл бұрын
Kentryle Teagues Next time you order something though amazon send me the link so I can send you my affiliate link. I will get a small percentage of the purchase and “you don’t pay any extra” This will help support my channel. Send to weldingandstuff@gmail.com
@jaimeorozco8652
4 жыл бұрын
Welding and stuff shoot the link
How did you do to hold the window up without anybody nobody helping
@weldingandstuff
5 жыл бұрын
Trevino Corina there's a couple holes in the side so I put a screwdriver in to hold it up or use a 2x4 board
@trevinocorina2623
5 жыл бұрын
@@weldingandstuff thanks for the info i realy need swich mine but have no help so your idea will help me do it my self
@weldingandstuff
5 жыл бұрын
Trevino Corina it's no to hard; give it a try
my window slows down after its half way up and I can't figure out why...
@weldingandstuff
5 жыл бұрын
1) Check your battery 2) Lubricate the motor and regulator 3) Make sure the rollers are on the tracks 4) Change the motor and regultor
Man your old one looked brand spanking new..?!!
@weldingandstuff
5 жыл бұрын
+Mark Pane it was; I had bought a cheap off brand. I was changing this every six months until I purchased the good brand
@nickstone7834
5 жыл бұрын
@@weldingandstuff Ah, I see.!! well..that explains how you swapped out so quick. It was getting routine. I just fixed my drivers side, it came outta the track..so I was catching videos on how to do this. thanks
def wasnt a window replacement
0 help