Thanks. One of the very few videos I found helpful on my first lock change.

I’m a real dummy. I tried to force fit one of these deadbolt latches onto a door lock that originally had a spring latch. Your video showed me how to make the conversion go a little smoother. Albeit such stupidity, by me, should have never been attempted in the first place (I was being lazy and cheap); you successfully explained the alignment problem with the internal latch mechanism. A 20 minute job took me all day because I couldn’t comprehend why these doorknobs are designed so differently: that one doorknob is not interchangeable with another by style or even brand. We’ve literally screwed up doorknob installation for the average dummy like me. 🙄😩✌️

Thank your for this! Really enjoyed watching the process

enjoyed the little trouble shooting of carving out the wood etc. bc often times that's what you're facing. great video.

Very helpful! Thank you

Thanks to you I completed the project myself 👍💪

Awesome, simple video. Thank you, sir!

Really helpful and pleasant video! Much appreciated

Thank you!! I didn’t know it was so easy!!

Good info, thank you!! We have a new house that needs all new locks

Adam thank you so much

Good video, thanks for your time

Thanks so much for posting this!

thanks

very informative

Thanks!I'm working on it..

Thanks, I am about to do this my self.

Liked it allot, the only suggestion would be to use a longer wood screws on the hinges... Yeah the extra wood and glue are OK but better to dig in deep with the screws. Make sense? Your presentation is always excellent...

@AdamDIY

8 жыл бұрын

Yeah you are right. I was not planning to be there that long and had to do a "for now" repair on the hinge. On the lower hinge I was able to use the long security screws that came with the new door knob. Thanks for watching. I enjoyed the comment.

@douggardine2276

6 жыл бұрын

I have had luck using a golf tee instead of toothpicks to fill the space in the hole. Just tap it in and cut it off. Very Slick.

Super good thanks!

Thank you

Thanks sir. ☺

Thanks! This was really helpful!!! Esp the links you gave in the details to amazon.

Awesome video Thank you for Making this video...your too Cool!!!

good!

Thank U

Good stuff

Thank you..thank you...thank you! Ready to get out and get this party started! Sure wish I had known about NOT closing the door and getting stuck. Fortunately I had LARGE screwdriver and a big hammer. However, I don't recommend that method. This old lady's bladder was near bursting. That;s right, I said BURSTING!. Well speaking of that, I need to .....

Is there a proper side up on the exterior key? Rough side of the key up or smooth back? Does it matter?

Wow I love to see the automatic key copying machine because in my place we still do it the old way manually grind it with the key machine.

Does he have the latch facing the wrong way? Doesn't it make it easy to break into with the small latch facing out?

Thanks! That was a cool video... And yes, I learned something! You're awesome! :-)

How easy is it to change out door locking door handles and deadbolts to a different brand of lock? I have old tarnished Titans that came with the house and would like to switch to better quality schlage locks. Not sure if it's a basic swap or if I have to do any modifying?

Am i the only person having a hard time with the phillips screws when putting the knobs on? The knob gets in the way and makes it difficult to get a good angle. I saw how he did it with no issue but i cant seem to get them in as easily. Im using the screws that came with the package. Am i just missing something?

I noticed on your outside entry door that you have the locking pin and flat side facing outwards. I have an outside door that opens inwards but I put the flat side of the latch with the locking pin facing outwards. I need the key outside to lock the assembly. If I put the latch the other way with the curved side facing outwards I noticed that I can lock the door with the inside knob and accidently lock myself out. The way it is now, the door will not close if the inside knob is already in the lock position, this way I can't accidently lock myself out. It's a Weiser Brand lock called a Yukon Entrance Knobset. I also noticed that with the curved side facing out that by slipping something thin between the door and the frame pressing against the curved side that you can open the door while locked. Which is the correct way to install the latch on an outside door that opens inwards?

The smart thing to do for a commercial business such as this would be to buy Grade 2 commercial hardware.

@IWBVS

7 жыл бұрын

after watching a couple of these youtube videos, you tend to know more than most HD/Lowes employees. I go there maybe 1-3x a week (I manage 20 units) and it's not uncommon for me to help someone in the plumbing aisle and then 2-3 people line up to ask me how to do something or which part to get. then there are those employees who are so knowledgeable that they could make $100k+ a year as a plumber.

You see how advance America is? We haven't got that sort if thing here !!

If my door doesn't have a rectangular bracket, how do I remove the old latch assembly?

You should have changed the strike plates to make it look more beautiful

@enlightenednews5265

6 жыл бұрын

Kieran Bricker "Beautiful" have you been eating to much Soy Kieran. Step away from the SOY KIERAN. 👠

how to move door locker out, with out see the sgroop

My turn button will not move. I’ve lined it up 3 times.

iphone 4

That door knob doesn't meet ADA requirements for a commercial building. It should have been replaced with the same style that was removed.

@redangrybird7564

5 жыл бұрын

Do you mean the lock should have a handle rather than a knob? If that is the case, do you know the reason ? Thanks.

8 bucks for a copy of a key? wtf.

CHANGE THAT TO A DOOR LEVER HANDLE CHANGE THE DOOR KNOB NOW NOW ADA PEOPLE COULD GET TRAPPED IN THE BATHROOM AND SCHLAGE F SERIES BED AND BATH HAS BUTTON LOCKS WITCH I DON'T LIKE