After watching this video, I got excited, picked up a towel next to me, and ran straight to my garage. But then I dropped everything in pain remembering that my car needs a good paint job first.
@carminecarlone2869
Жыл бұрын
😭😭😭😭
@tptt4
Жыл бұрын
me too but then i realized i don’t have a car
@Trash2TreasuresOFL
Жыл бұрын
@@tptt4 🤣🤣🤣
@AshishSharma-tf7hx
11 ай бұрын
@@tptt4me too, but I realized I don't even have a garage 🤔
@cod2573
10 ай бұрын
Me too but then I realised I park my car on a public road, under a tree which drops sap, leaves and bird shit on it 😔
@jamram9924 Жыл бұрын
Then run through an automated washer and destroy the ceramic coating (which the majority of my customers did after they were warned not to do so) 🤦🏻♂️
@PREDATOR07
Жыл бұрын
Nope.
@teem5642
Жыл бұрын
How do you maintain it? And how long does it last. Talking mainly about those coats you can buy in stores
@jamram9924
Жыл бұрын
@@teem5642 I used a spray wax or enhancer as I dry my vehicle. Apply in 2’ sections, in the shade with clean microfiber towels. Give it brief buff, turning the towel after each application for even coverage. Don’t allow the most to dry on the paint surface.
@blonded3598
Жыл бұрын
@@teem5642just wash the car with a high quality wash and wax soap then ceramic detail spray. APPLY ON PAD FIRST then put it on the car and wipe with a microfiber towel. Dont spray the detailer on the car first very important
@teem5642
Жыл бұрын
@@blonded3598 appreciate it. Saves me messing it up haha
@jayibakumarra8 ай бұрын
Forgot the IPA before applying :(
@123fuhfrtgfhАй бұрын
Hot tip....use the iron remover as your clay lubricant, because it's also removes limescale. This will mean you use less iron remover and get get a better result.
@MsIndieRay5 ай бұрын
Whatever you're charging for your service it's probably not enough. Excellent 💯
@MarySanchez-qk3hp5 ай бұрын
... and that, boys and girls, is why we pay professionals like this man, to do it properly for us! 😉
@chickencurry7642 Жыл бұрын
The only reason I don't clean my car to the point where it looks like a new one is because of some a**holes living in my area, who would scratch nice looking or clean cars when you have parked in a public place and leave your car unattended...
@theBassSmith
11 ай бұрын
That's why God made ring cameras
@denzeljackson6505 Жыл бұрын
In my opinion that is 100% how it's done you can't get any more perfect prep than that. Only thing guys look at the paint carefully to to determine if you need a compound or if a Polish alone will do the job
@NoNonsenseJohnson
8 ай бұрын
I was just about to say that it may not always be necessary to compound heavy cutting, and always if possible try to check the thickness of the paint. No hate or anything he done a mighty fine job. Just not every car needs the heavy cutting.
@ruheluddin9384
Ай бұрын
Must you use a machine polish? I don’t have that. Well, I have a drill n multitool, maybe I can use them and just buy the polish heads separate?
@ruheluddin9384
Ай бұрын
Which ceramic product do you use?
@rot_v
9 күн бұрын
Depends on the paint, you can get away with a heavy compound on most German paints, even black!
@Carbine6082 Жыл бұрын
Definitely I'm gonna be able to do that at home
@cataca91
11 ай бұрын
uh yes, find the means to do it
@h626282 ай бұрын
Straight to the point
@semmoney5686 Жыл бұрын
Wish had a indoor safe place to work on my car and do nice things like this.
@_GandalfTheGrey_11 ай бұрын
I just ceramic coated my car at HOME thanks to this video 🤙
@autoclean
11 ай бұрын
Yes, this is awesome to hear. 😊
@theBassSmith
11 ай бұрын
😂 horme is where the car is
@cspray5386
9 ай бұрын
@@theBassSmith Horme is where the heart is , too.
@vdubskiee5356
4 ай бұрын
😂😂😂😂😂
@NaymitMayne9 ай бұрын
First it depends on the state of the car. You can ceramic coat a car with just light polish
@TdwageLuTher3 ай бұрын
ever tried a synthetic decontamination towel? way more surface area than an actual clay and it wont scratch like clay with proper lubrication .
@radiomaster20011 ай бұрын
I’ve seen some people apply a ceramic coating is circles and they say it’s easy to not get high spots for beginners, are circles a good way to do it as well?
@dealerhealer36737 ай бұрын
If you can leave black scratch and swirl free, you got my respect!
@dm636827 күн бұрын
Does ceramic coat repels pollen or dirt? How to keep it clean?
@macabreseryeph5 ай бұрын
Does the foam pad applicator hardens after using it to ceramic coat?
@mr.nobody96468 ай бұрын
Pro tip: give your car to a detailing shop for polishing and the you do the ceramic coating at home. This way you can save a ton of money while getting a perfect finishing.
@cliftonsargent15727 ай бұрын
What do you like to use for tire/wheel shine?
@donperry1013 ай бұрын
What about if you don’t have a garage can you use a car cover ?????
@user-yv8pe2ih5y3 ай бұрын
Is it compulsory to wax before ceramic coating
@jackbauer86997 ай бұрын
When I’m polishing why doesn’t all the polish come off while buffing with a microfiber towel
@whendidiask56168 ай бұрын
Do I need to dry the car between the wash, decontaminating and clay baring process?
@madcannagrow28335 ай бұрын
Is paint prep solution isopropyl alcohol?
@user-rc2pc7vp2nАй бұрын
You have a lot of product, bro, especially the polish
@curse6of6me6Ай бұрын
Whats with the tape down centre of bonnent?
@anthonynieves66144 ай бұрын
U cannot use iron remover on all cars big mistake people
@angelgomez5928 Жыл бұрын
Ceramic coating do you use?
@2471dan8 ай бұрын
I tried doing it with fush & chups and it was way better!!! Plus upside you can eat it later
@user-vc7th6uj5m Жыл бұрын
How much the ceramic coating cost for Camry 2017
@SayanOfRagnarok8 ай бұрын
Why do people do wheels first if when you wash the car the dirt from the top will drip onto the wheels again no ?
@VangRyanVang10 ай бұрын
I know you said paint prep solution but you didn’t show the step. Most folks need to visually see that prep
@satberhoxhaj33473 ай бұрын
You missed the diluted alcohol wipe before ceramic
@edgy17910 ай бұрын
Or a clay mitt for easier hse
@stevenyoung6415 Жыл бұрын
and the pigeon is waiting for the car to come out from the garage the next morning. Depth Charge dropped... SCORE! Car owner... WTF!!! :-{
@mykofalco11 күн бұрын
forgot ipa and you can't wipe off ceramic coating immediately. you need at least 90 seconds to flash first. don't misguide people.
@mattnielsen763911 ай бұрын
bruh. do NOT start with heavy. least aggressive first and then only get more aggressive IF NEEDED.
@sherviee
11 ай бұрын
Incorrect always compound before polish… more aggressive to least aggressive is the way to go.
@ohboy2592
8 ай бұрын
@@sherviee😂😂😂 nope, 99% of cars do not need a compound. You are just thinning the clear coat even more for no reason. Most detailers I know dont even have a compound anymore.
@adisurd
7 ай бұрын
@@ohboy2592I’m a cheap bastard. I’ll skip polishing altogether and go to ceramic coating. My car will be a year old when I do that.
@user-ci2xg7rq5y
4 ай бұрын
@@ohboy2592for 99.99999% of people the amount of clear coat you remove is completely irrelevant. You could compound and polish at least 20 times before you're even getting close to causing a problem. Reality is unless you're wet sanding you're removing an imperceptible amount of clear and although clear coats are getting thinner it's still not relevant. We should be telling people the truth that they aren't going to hurt anything so they feel confident enough to do it. I can understand that detailers don't know the vehicles history and have to be on the safe side but it's getting ridiculous in the industry this fear of removing too much clear coat. Unless you fall asleep with a DA on the paint you're not going to hurt anything.
@hytak18
Ай бұрын
Literally nobody in history who knows what they're doing would do this.
@danielgolladay9 ай бұрын
Definitely didn’t just do mine and have it start pouring right in the middle
@isaiahluna4607Ай бұрын
Mi jefe dice no clay bar porque la polish la quita
@MrChuckwagon55 Жыл бұрын
What do you think of right rinseless washing?
@johniii8147 Жыл бұрын
The CARR
@sedanzzz_guy248811 ай бұрын
Remeber read the product instructions I let mine flash for 3 minutes before removing when it’s cool outside because otherwise the product wipes right off leaving the car unprotected
@Erix7810
9 ай бұрын
Negative ghost rider. That active ceramic ingredient bonds almost immediately to the surface. What you’re wiping off and removing is the liquid ‘carrier’. This is not your grandpas car wax we are talking about.
@racing74711 күн бұрын
Is it worth it for white vehicles as well? I just purchased beautiful White Lexus RC 350 but don't see many if any detailing videos on white paint
@TheFighterBros
9 күн бұрын
Of you love your car if course. Also if it really is new you probably don't have to polish it
@lukelawrence60078 ай бұрын
Detail shops this product costs $995-2k for them to do it
@evansteeves5888
6 ай бұрын
Yea due to the fact it takes 10-13 hours to do alone (heavily depending on size and shape of car), most of that cost is working hours and maybe $150-200 worth of products. If I were to have a detailing business I wouldn’t charge less than $1200 for a job like this otherwise you aren’t making much money. Also depends on area and cost of living.
@t3rdc377
5 ай бұрын
If I can get down to one car a day I wouldn’t mine doing it for 800
@Neojaw Жыл бұрын
Does rubbing the iron remover into the paint cause scratching from rubbing loose contaminants into the paint? Just wondering, I’m sure it’s little more effective in removing the iron though
@autoclean
Жыл бұрын
It is likely that this method will cause micro scratches. But, the purpose is to remove all contamination ready for the first stage of paint correction. It's not recommended to start paint correction before completely removing all contamination, you will ruin your pads too. Any marring or swirls caused by the decon stage will be removed in the paint correction stage
@Neojaw
Жыл бұрын
@@autoclean that makes sense I’ll start doing that then. Maybe I’ll do first spray down with iron remover let it sit then rinse. Then 2nd spray down I’ll rub/wipe after majority of contaminants are off. Cuz some people just do a spray wax, but still want decon. Don’t wanna return the car more scratched
@anthonyjacksonjr4812 Жыл бұрын
👀👀👀👀💪🏾💪🏾💪🏾
@KEVINSURIEL9 ай бұрын
For the heavy compound can you do it to the entire car before moving on to the fine polisher?
@dream-zf1th
8 ай бұрын
yes of course
@dream-zf1th
8 ай бұрын
dosnt matter what order or time between
@JuanDiaz-jo1rw11 ай бұрын
It's 3 days to fully cure not 24 hours.
@TheImpactProductionzАй бұрын
No ipa before hand?? And just outside in the wind etc? I mean….atleast try to do it in a garage but hey whatever worked for u. I’m sure u do just fine.
@TortugaDeRio3 ай бұрын
ORRRR NORRRRRR!
@glutenfreeegaming8747 Жыл бұрын
This won't fly in Canada. Water only unless you go to a car wash.
@testtestlast4306
Жыл бұрын
Surely you're joking? Thats crazy
@glutenfreeegaming8747
Жыл бұрын
@@testtestlast4306 Lots of craziness up here. We want to move.
@wilhelmtyskeberget210711 ай бұрын
He washed his beetle in direct sunlight 😂🤡
@mightymizzar9672 Жыл бұрын
what's the benefits of a ceramic coating?
@jeffdwtf
Жыл бұрын
A thin glass-like layer that protects your paint.
@mightymizzar9672
Жыл бұрын
@@jeffdwtf thank you
@albertovargas7271
Жыл бұрын
Also. Help you take car if your car when your do washes at home it makes it more easier to wash
@lilesm647611 ай бұрын
Don’t you need an ipa solution before adding the ceramic 🤔🤔
@Erix7810
9 ай бұрын
Waste of time if you use good towels to wipe your polish.
@garyredmond1890
8 ай бұрын
Yes, IPA / panel wipe should be used before applying any LSP to ensure a good bond.
@ohboy2592
8 ай бұрын
@@Erix7810no towel on the planet will remove polishing oils alone
@RICHYSUNCLE7 ай бұрын
I’ll pay someone
@danielirjones16785 ай бұрын
You can’t ceramic a car oitside
@mollagwenchana637212 күн бұрын
May pag-asa pa mabuo sila. Triple effort si lalaki dapat
@111ARR Жыл бұрын
So the waxing step is not required when applying a ceramic coat?
@autoclean
Жыл бұрын
No, you only need one type of protection, in this case ceramic coating
@111ARR
Жыл бұрын
Schweet. Thanks for the response. 👍🏻
@t.f.3305
Жыл бұрын
@@111ARR with clean paint, apply ceramic coat, follow their directions on container, ANY ADDITIONAL COATINGS ACT AS A BUFFER to protect the ceramic. You can wax, and seal, three layers
@farqualeetali4022
Жыл бұрын
@@t.f.3305 Ceramic coatings are better than wax for many reasons. One of them is that ceramic coating doesn't attract contaminants like wax does. They also have a better hydrophobic effect than wax or sealant and leave your paint with protection but without the additional color altering properties like wax. If you're paying good money for ceramic coating, why would you use an inferior product over it? If you really want that extra protection, pay for a good one, wash your car properly every week, follow the instructions and if you really want another layer, use a maintenance ceramic spray.
@t.f.3305
Жыл бұрын
@@farqualeetali4022 That actually makes sense
@Guri7502910 ай бұрын
Can i wax after polishing and before wiping with IPA ?
@geocane5844 Жыл бұрын
Damn that's alot
@SilverDomUKАй бұрын
Then 2 days after you have done this, it rains and all the dust and crap in the rain settles on your car. When it dries you have a car covered in dust spots so it's time to wash the car again!! Repeat.
@cyprianokongwu5998
Ай бұрын
Exactly my dilemma at the moment 😂😂
@AvatarKid411 ай бұрын
And don’t do it outside
@denzeljackson650511 ай бұрын
Don't think it's a good idea to agitate the iron remover chances are you gonna scratch your paint with brake dust and other metals that's on the car other than that perfect
@norm3799 ай бұрын
NEVER NEVER USE A BUFFER..
@garyredmond1890
8 ай бұрын
Explain why.
@RajeshRajRamayanKoothrappali Жыл бұрын
Nice , first
@JanKowalski-bj7ob Жыл бұрын
not everybody got polish mashine its not cheap ;d
@LandonsBuildz
Жыл бұрын
If you can’t afford some polish then you shouldn’t be worried about how you car looks. Also a drill with an attachment works alright
@farqualeetali4022
Жыл бұрын
You don't need a polishing machine. Elbow grease works fine. But if you want the best result, you better open up the wallet.
@LandonsBuildz
Жыл бұрын
@@farqualeetali4022 you’ll definitely have inconsistencies with doing it by hand. Most everyone has a drill and that works okay
@albertovargas7271
Жыл бұрын
Nah just get a compound and finished polish but by hand to do it by hand because if you go with a drill it can make more scratches
@phuongshane.tran19908 ай бұрын
Too much efforts..
@keithmichael583911 ай бұрын
Get it done professionally... consumer 'ceramic' car products are difficult to work with, especially on a black car/truck. Or simply wax your vehicle every 3 months... it takes less than an hour, it's inexpensive, and it protects the paint.
@ohboy2592
8 ай бұрын
Many consumer grade coatings are just as easy as applying a wax and you get a much better result
@keithmichael5839
8 ай бұрын
@@ohboy2592 would u recommend one, because the two that I've tried have been just abysmal to work with. They were sprays, so maybe that had something to do with it, but it was not manageable with a black truck. If there's one I should try, please advise. Thank you.
@ohboy2592
8 ай бұрын
@@keithmichael5839 I have used turtle wax hybrid solution ceramic spray wax and their seal n shine. Both are easy to apply and offer great shine and protection. I like the UV for summer. I think a good carnuba wax is hard to beat on shine though. On daily drivers I got a good 9-11 months of protection. Literally spray one pump per panel, wipe off and then buff. Took me 10-15 minutes to do my truck. Both of these are sprays. I didn’t believe the hype until I tried them.
@ohboy2592
8 ай бұрын
@@keithmichael5839 sorry, I was thinking you were another post. I’m trying DIY detail 5 year coating soon. Gtechniq is very easy and I’ve used it before. There’s a few others. Do you watch any KZread detailers?
@GREightySix
8 ай бұрын
@@keithmichael5839 Armor Shield IX, Carpro Cquartz & Crystal Serum Light - all 3 of those are great and easy to work with ceramic coatings.
@jimg6476 Жыл бұрын
Lots of work. No wonder detailer charge $ 1,000 ip.
@JuanDiaz-jo1rw
11 ай бұрын
I pay $370 for my 2023 pick up truck for a 7 year ceramic coat package.
@andreah830510 ай бұрын
Toooooo many steps!!!!! Said the adhd-er
@nickcross3109 Жыл бұрын
Or if your thick and buy a overpriced beatle then throw the car away 😂
Пікірлер: 146
After watching this video, I got excited, picked up a towel next to me, and ran straight to my garage. But then I dropped everything in pain remembering that my car needs a good paint job first.
@carminecarlone2869
Жыл бұрын
😭😭😭😭
@tptt4
Жыл бұрын
me too but then i realized i don’t have a car
@Trash2TreasuresOFL
Жыл бұрын
@@tptt4 🤣🤣🤣
@AshishSharma-tf7hx
11 ай бұрын
@@tptt4me too, but I realized I don't even have a garage 🤔
@cod2573
10 ай бұрын
Me too but then I realised I park my car on a public road, under a tree which drops sap, leaves and bird shit on it 😔
Then run through an automated washer and destroy the ceramic coating (which the majority of my customers did after they were warned not to do so) 🤦🏻♂️
@PREDATOR07
Жыл бұрын
Nope.
@teem5642
Жыл бұрын
How do you maintain it? And how long does it last. Talking mainly about those coats you can buy in stores
@jamram9924
Жыл бұрын
@@teem5642 I used a spray wax or enhancer as I dry my vehicle. Apply in 2’ sections, in the shade with clean microfiber towels. Give it brief buff, turning the towel after each application for even coverage. Don’t allow the most to dry on the paint surface.
@blonded3598
Жыл бұрын
@@teem5642just wash the car with a high quality wash and wax soap then ceramic detail spray. APPLY ON PAD FIRST then put it on the car and wipe with a microfiber towel. Dont spray the detailer on the car first very important
@teem5642
Жыл бұрын
@@blonded3598 appreciate it. Saves me messing it up haha
Forgot the IPA before applying :(
Hot tip....use the iron remover as your clay lubricant, because it's also removes limescale. This will mean you use less iron remover and get get a better result.
Whatever you're charging for your service it's probably not enough. Excellent 💯
... and that, boys and girls, is why we pay professionals like this man, to do it properly for us! 😉
The only reason I don't clean my car to the point where it looks like a new one is because of some a**holes living in my area, who would scratch nice looking or clean cars when you have parked in a public place and leave your car unattended...
@theBassSmith
11 ай бұрын
That's why God made ring cameras
In my opinion that is 100% how it's done you can't get any more perfect prep than that. Only thing guys look at the paint carefully to to determine if you need a compound or if a Polish alone will do the job
@NoNonsenseJohnson
8 ай бұрын
I was just about to say that it may not always be necessary to compound heavy cutting, and always if possible try to check the thickness of the paint. No hate or anything he done a mighty fine job. Just not every car needs the heavy cutting.
@ruheluddin9384
Ай бұрын
Must you use a machine polish? I don’t have that. Well, I have a drill n multitool, maybe I can use them and just buy the polish heads separate?
@ruheluddin9384
Ай бұрын
Which ceramic product do you use?
@rot_v
9 күн бұрын
Depends on the paint, you can get away with a heavy compound on most German paints, even black!
Definitely I'm gonna be able to do that at home
@cataca91
11 ай бұрын
uh yes, find the means to do it
Straight to the point
Wish had a indoor safe place to work on my car and do nice things like this.
I just ceramic coated my car at HOME thanks to this video 🤙
@autoclean
11 ай бұрын
Yes, this is awesome to hear. 😊
@theBassSmith
11 ай бұрын
😂 horme is where the car is
@cspray5386
9 ай бұрын
@@theBassSmith Horme is where the heart is , too.
@vdubskiee5356
4 ай бұрын
😂😂😂😂😂
First it depends on the state of the car. You can ceramic coat a car with just light polish
ever tried a synthetic decontamination towel? way more surface area than an actual clay and it wont scratch like clay with proper lubrication .
I’ve seen some people apply a ceramic coating is circles and they say it’s easy to not get high spots for beginners, are circles a good way to do it as well?
If you can leave black scratch and swirl free, you got my respect!
Does ceramic coat repels pollen or dirt? How to keep it clean?
Does the foam pad applicator hardens after using it to ceramic coat?
Pro tip: give your car to a detailing shop for polishing and the you do the ceramic coating at home. This way you can save a ton of money while getting a perfect finishing.
What do you like to use for tire/wheel shine?
What about if you don’t have a garage can you use a car cover ?????
Is it compulsory to wax before ceramic coating
When I’m polishing why doesn’t all the polish come off while buffing with a microfiber towel
Do I need to dry the car between the wash, decontaminating and clay baring process?
Is paint prep solution isopropyl alcohol?
You have a lot of product, bro, especially the polish
Whats with the tape down centre of bonnent?
U cannot use iron remover on all cars big mistake people
Ceramic coating do you use?
I tried doing it with fush & chups and it was way better!!! Plus upside you can eat it later
How much the ceramic coating cost for Camry 2017
Why do people do wheels first if when you wash the car the dirt from the top will drip onto the wheels again no ?
I know you said paint prep solution but you didn’t show the step. Most folks need to visually see that prep
You missed the diluted alcohol wipe before ceramic
Or a clay mitt for easier hse
and the pigeon is waiting for the car to come out from the garage the next morning. Depth Charge dropped... SCORE! Car owner... WTF!!! :-{
forgot ipa and you can't wipe off ceramic coating immediately. you need at least 90 seconds to flash first. don't misguide people.
bruh. do NOT start with heavy. least aggressive first and then only get more aggressive IF NEEDED.
@sherviee
11 ай бұрын
Incorrect always compound before polish… more aggressive to least aggressive is the way to go.
@ohboy2592
8 ай бұрын
@@sherviee😂😂😂 nope, 99% of cars do not need a compound. You are just thinning the clear coat even more for no reason. Most detailers I know dont even have a compound anymore.
@adisurd
7 ай бұрын
@@ohboy2592I’m a cheap bastard. I’ll skip polishing altogether and go to ceramic coating. My car will be a year old when I do that.
@user-ci2xg7rq5y
4 ай бұрын
@@ohboy2592for 99.99999% of people the amount of clear coat you remove is completely irrelevant. You could compound and polish at least 20 times before you're even getting close to causing a problem. Reality is unless you're wet sanding you're removing an imperceptible amount of clear and although clear coats are getting thinner it's still not relevant. We should be telling people the truth that they aren't going to hurt anything so they feel confident enough to do it. I can understand that detailers don't know the vehicles history and have to be on the safe side but it's getting ridiculous in the industry this fear of removing too much clear coat. Unless you fall asleep with a DA on the paint you're not going to hurt anything.
@hytak18
Ай бұрын
Literally nobody in history who knows what they're doing would do this.
Definitely didn’t just do mine and have it start pouring right in the middle
Mi jefe dice no clay bar porque la polish la quita
What do you think of right rinseless washing?
The CARR
Remeber read the product instructions I let mine flash for 3 minutes before removing when it’s cool outside because otherwise the product wipes right off leaving the car unprotected
@Erix7810
9 ай бұрын
Negative ghost rider. That active ceramic ingredient bonds almost immediately to the surface. What you’re wiping off and removing is the liquid ‘carrier’. This is not your grandpas car wax we are talking about.
Is it worth it for white vehicles as well? I just purchased beautiful White Lexus RC 350 but don't see many if any detailing videos on white paint
@TheFighterBros
9 күн бұрын
Of you love your car if course. Also if it really is new you probably don't have to polish it
Detail shops this product costs $995-2k for them to do it
@evansteeves5888
6 ай бұрын
Yea due to the fact it takes 10-13 hours to do alone (heavily depending on size and shape of car), most of that cost is working hours and maybe $150-200 worth of products. If I were to have a detailing business I wouldn’t charge less than $1200 for a job like this otherwise you aren’t making much money. Also depends on area and cost of living.
@t3rdc377
5 ай бұрын
If I can get down to one car a day I wouldn’t mine doing it for 800
Does rubbing the iron remover into the paint cause scratching from rubbing loose contaminants into the paint? Just wondering, I’m sure it’s little more effective in removing the iron though
@autoclean
Жыл бұрын
It is likely that this method will cause micro scratches. But, the purpose is to remove all contamination ready for the first stage of paint correction. It's not recommended to start paint correction before completely removing all contamination, you will ruin your pads too. Any marring or swirls caused by the decon stage will be removed in the paint correction stage
@Neojaw
Жыл бұрын
@@autoclean that makes sense I’ll start doing that then. Maybe I’ll do first spray down with iron remover let it sit then rinse. Then 2nd spray down I’ll rub/wipe after majority of contaminants are off. Cuz some people just do a spray wax, but still want decon. Don’t wanna return the car more scratched
👀👀👀👀💪🏾💪🏾💪🏾
For the heavy compound can you do it to the entire car before moving on to the fine polisher?
@dream-zf1th
8 ай бұрын
yes of course
@dream-zf1th
8 ай бұрын
dosnt matter what order or time between
It's 3 days to fully cure not 24 hours.
No ipa before hand?? And just outside in the wind etc? I mean….atleast try to do it in a garage but hey whatever worked for u. I’m sure u do just fine.
ORRRR NORRRRRR!
This won't fly in Canada. Water only unless you go to a car wash.
@testtestlast4306
Жыл бұрын
Surely you're joking? Thats crazy
@glutenfreeegaming8747
Жыл бұрын
@@testtestlast4306 Lots of craziness up here. We want to move.
He washed his beetle in direct sunlight 😂🤡
what's the benefits of a ceramic coating?
@jeffdwtf
Жыл бұрын
A thin glass-like layer that protects your paint.
@mightymizzar9672
Жыл бұрын
@@jeffdwtf thank you
@albertovargas7271
Жыл бұрын
Also. Help you take car if your car when your do washes at home it makes it more easier to wash
Don’t you need an ipa solution before adding the ceramic 🤔🤔
@Erix7810
9 ай бұрын
Waste of time if you use good towels to wipe your polish.
@garyredmond1890
8 ай бұрын
Yes, IPA / panel wipe should be used before applying any LSP to ensure a good bond.
@ohboy2592
8 ай бұрын
@@Erix7810no towel on the planet will remove polishing oils alone
I’ll pay someone
You can’t ceramic a car oitside
May pag-asa pa mabuo sila. Triple effort si lalaki dapat
So the waxing step is not required when applying a ceramic coat?
@autoclean
Жыл бұрын
No, you only need one type of protection, in this case ceramic coating
@111ARR
Жыл бұрын
Schweet. Thanks for the response. 👍🏻
@t.f.3305
Жыл бұрын
@@111ARR with clean paint, apply ceramic coat, follow their directions on container, ANY ADDITIONAL COATINGS ACT AS A BUFFER to protect the ceramic. You can wax, and seal, three layers
@farqualeetali4022
Жыл бұрын
@@t.f.3305 Ceramic coatings are better than wax for many reasons. One of them is that ceramic coating doesn't attract contaminants like wax does. They also have a better hydrophobic effect than wax or sealant and leave your paint with protection but without the additional color altering properties like wax. If you're paying good money for ceramic coating, why would you use an inferior product over it? If you really want that extra protection, pay for a good one, wash your car properly every week, follow the instructions and if you really want another layer, use a maintenance ceramic spray.
@t.f.3305
Жыл бұрын
@@farqualeetali4022 That actually makes sense
Can i wax after polishing and before wiping with IPA ?
Damn that's alot
Then 2 days after you have done this, it rains and all the dust and crap in the rain settles on your car. When it dries you have a car covered in dust spots so it's time to wash the car again!! Repeat.
@cyprianokongwu5998
Ай бұрын
Exactly my dilemma at the moment 😂😂
And don’t do it outside
Don't think it's a good idea to agitate the iron remover chances are you gonna scratch your paint with brake dust and other metals that's on the car other than that perfect
NEVER NEVER USE A BUFFER..
@garyredmond1890
8 ай бұрын
Explain why.
Nice , first
not everybody got polish mashine its not cheap ;d
@LandonsBuildz
Жыл бұрын
If you can’t afford some polish then you shouldn’t be worried about how you car looks. Also a drill with an attachment works alright
@farqualeetali4022
Жыл бұрын
You don't need a polishing machine. Elbow grease works fine. But if you want the best result, you better open up the wallet.
@LandonsBuildz
Жыл бұрын
@@farqualeetali4022 you’ll definitely have inconsistencies with doing it by hand. Most everyone has a drill and that works okay
@albertovargas7271
Жыл бұрын
Nah just get a compound and finished polish but by hand to do it by hand because if you go with a drill it can make more scratches
Too much efforts..
Get it done professionally... consumer 'ceramic' car products are difficult to work with, especially on a black car/truck. Or simply wax your vehicle every 3 months... it takes less than an hour, it's inexpensive, and it protects the paint.
@ohboy2592
8 ай бұрын
Many consumer grade coatings are just as easy as applying a wax and you get a much better result
@keithmichael5839
8 ай бұрын
@@ohboy2592 would u recommend one, because the two that I've tried have been just abysmal to work with. They were sprays, so maybe that had something to do with it, but it was not manageable with a black truck. If there's one I should try, please advise. Thank you.
@ohboy2592
8 ай бұрын
@@keithmichael5839 I have used turtle wax hybrid solution ceramic spray wax and their seal n shine. Both are easy to apply and offer great shine and protection. I like the UV for summer. I think a good carnuba wax is hard to beat on shine though. On daily drivers I got a good 9-11 months of protection. Literally spray one pump per panel, wipe off and then buff. Took me 10-15 minutes to do my truck. Both of these are sprays. I didn’t believe the hype until I tried them.
@ohboy2592
8 ай бұрын
@@keithmichael5839 sorry, I was thinking you were another post. I’m trying DIY detail 5 year coating soon. Gtechniq is very easy and I’ve used it before. There’s a few others. Do you watch any KZread detailers?
@GREightySix
8 ай бұрын
@@keithmichael5839 Armor Shield IX, Carpro Cquartz & Crystal Serum Light - all 3 of those are great and easy to work with ceramic coatings.
Lots of work. No wonder detailer charge $ 1,000 ip.
@JuanDiaz-jo1rw
11 ай бұрын
I pay $370 for my 2023 pick up truck for a 7 year ceramic coat package.
Toooooo many steps!!!!! Said the adhd-er
Or if your thick and buy a overpriced beatle then throw the car away 😂
Dis is how you ceramic coat ay HAOOORRMM.
How much ?