How to Build a Tire Spreader
Тәжірибелік нұсқаулар және стиль
#tirerepair #diytools #toolmaker
I know its not forging BUT if you have anything with wheels and you want to fix your own tires- you're going to want this tool in your shop!
In this video I take you through the steps to build this diy tire spreader and give you the measurements for all of the pieces along the way. As always, I'll demonstrate at the end of the video.
Tools & Materials used in this video:
- Angle finder: amzn.to/3TRDMmmamzn.t...
- Metal pencils: amzn.to/48Hcfbt
- Tape measure: amzn.to/47nG0Nt
- Safety glasses: amzn.to/3SbcvKE
- Angle grinder: amzn.to/48ojEN7
- Welding helmet: amzn.to/48ooSbC
- Welding magnets: amzn.to/4aIaLj9
- My welder: amzn.to/4aWu7RM
Disclaimer: I only recommend products I use myself and all opinions expressed here are my own. This post may contain what are referred to as “affiliate links.” If you click on a link that brings you to a page where you may like to purchase something, your shopping experience will not be at all affected. However, I may receive a small commission at no additional cost to you. Thank you so much for supporting this channel!
Hi, I'm Jayce, the blacksmith behind Farmstead Forge. I am a farrier by trade; I learned the basics of blacksmithing at shoeing school and the rest I learned on my own. I'm excited to expand my knowledge and continue learning while also sharing my passion with others.
Join me in the shop on my Montana farmstead where I enjoy building tools and other fun projects that we can use around the place.
If you enjoyed this video please consider giving it a like, I’d appreciate it! Also, make sure to subscribe so you don’t miss out on new videos every Tuesday morning!
Connect with me on Instagram: farmsteadforge
Contact Me: jaycefulbright@gmail.com
Пікірлер: 19
In Montana you need this, with all the gravel roads. Nice simple build Jayce and well done. Thanks for sharing.
@FarmsteadForge
6 ай бұрын
Thanks. Ya I patch more tires than I care too unfortunately but it's better than having to take them to town.
Another useful tool for the shop! Good step by step build! I strongly "Second" the three comments below! Good post!
@FarmsteadForge
6 ай бұрын
Thanks Bob!
..That's handier than a Sheriff in your pocket! a Whole lot easier than pushing a tire onto a rim or piece of firewood, Well done sir...! oh, Yes on the handles.
@FarmsteadForge
6 ай бұрын
Haha that's hilarious! Thanks for the feedback. Growing up we always used a double open end wrench, so this is definitely an improvement.
Good way to start my snowy morning in SW Wisconsin. You're a pretty handy guy Jayce! I like it!
@FarmsteadForge
6 ай бұрын
Thank you! It has been a mild winter here so far but it sounds like the subzero temps are starting this week. I busted out a bunch of shoeing this weekend so that hopefully I can just work in the shop during the cold snap!
@danieltesar7771
6 ай бұрын
We are just starting to get a little cold here, but we got slammed with 10" of snow yesterday. I've been trying to bust butt to catch up on horses too!
Ready to put boots in all day!
@FarmsteadForge
6 ай бұрын
Haha not all day, I'm not that in love with patching tires!
Espectacular. !!!!
@FarmsteadForge
6 ай бұрын
Thank you!
Are the rollers really that necessary for these things? Do the tires being repaired frequently have a continuous set of holes throughout the perimeter that need to be patched? Or is the reason for it because it's unknown where the hole is, and this allows it to be spun around easily in search of the hole?
@FarmsteadForge
3 ай бұрын
Not necessary, but it makes it a lot nicer especially if you are using a pick to dig gravel or a nail out of the hole, you can move it around as needed.
The only way that "Atlas Tube Repair" kit could be any cooler is if it were "ACME Tube Repair."
@FarmsteadForge
6 ай бұрын
Ya that would be pretty cool. I'd like to find an old tire advertisement sign to hang above my tire changing station in my shop. Thanks for watching!
If you didn't have the materials already on hand and had to buy them, what's the approximate raw material cost?
@FarmsteadForge
3 ай бұрын
I honestly have no idea, it really depends on your location and what prices are like there.