How to Build a Gate on a Wood Fence | Gate Bracing Pt.1

PART 1:
This is how WE build the bracing for a wood fence gate. We used pressure treated lumber for bracing but use multiple 2x4's to fight the natural warping that can happen with southern yellow pine.
We are Mr. Fence!
A fencing company located in Evansville, Indiana. We travel the world teaching other fencing professionals how to stream line their business while also innovating the way we build fence!
Follow us on social media!

Пікірлер: 40

  • @davidkeppler37
    @davidkeppler372 жыл бұрын

    That 45 deg brace info is absolutely essential. Thanks.!!

  • @thatlatinkid7136
    @thatlatinkid71362 жыл бұрын

    I recently got into fencing and want to start my own company one day , your videos are so helpful and improving my work!

  • @anonymousperson4363
    @anonymousperson43632 жыл бұрын

    Best explanation of the bracing being 45 degrees and less being the goal,

  • @territodude
    @territodude7 ай бұрын

    Thank you for your explanation. I see so many people on wide gates going over the 45 degrees and claiming they are no sag gates. And then some that are far less than 45 degrees and was wondering why. I am planning on building a double gate in a 10 foot span in the next couple of weeks with horizontal pickets and you most likely saved me from making the same mistake. I appreciate your channel!

  • @landmarkcreations1183
    @landmarkcreations11833 жыл бұрын

    It’s rare..but I think I finally found someone who loves fencing as much if not more than me😎🤘

  • @mrfenceacademy

    @mrfenceacademy

    3 жыл бұрын

    I know I know I am a big fence Geek

  • @landmarkcreations1183

    @landmarkcreations1183

    3 жыл бұрын

    @@mrfenceacademy nothing wrong with that my brother! I am too

  • @billybongseariders5428
    @billybongseariders54282 ай бұрын

    That 45 degree angle makes more sense to me, than when I was in school. 🤣🤣 however I was planning on redoing my double 6’ gate, because it was weak and already sagging. Thanks for the breakdown and knowledge and now I have you to look forward to in my future projects.

  • @regularguy8771
    @regularguy8771 Жыл бұрын

    Great video, explained perfectly.

  • @laurapaugh3640
    @laurapaugh3640 Жыл бұрын

    Now I know why our 5ft. gate started sagging in short order, 1st time fence DIYers and we did pretty good until the gate...Thank You for this Awesome Training.

  • @basketball798
    @basketball7982 жыл бұрын

    Great explanation! I will pass info onto my father who has been doing things by guess for 50years!

  • @ChadAmI80
    @ChadAmI803 жыл бұрын

    Super helpful. Thanks for the video.

  • @stgraves260
    @stgraves2607 ай бұрын

    I have learned so much from this man. Thank you sir for all the info and such a detailed video.

  • @mrfenceacademy

    @mrfenceacademy

    6 ай бұрын

    Glad it was helpful!

  • @PaulOrientedotcom
    @PaulOrientedotcom10 ай бұрын

    Great explanation. Thank you.

  • @gergemall
    @gergemall10 ай бұрын

    Outstanding content ❤

  • @remowb
    @remowb2 жыл бұрын

    I am planning on a 15' section of fence, with a 4' gate, on one side of my house (replacing a chain link with wood). I intend to follow your videos for the construction. I will bolt two 4X4s for the hinge side of gate. I have read that a gate should always open away from public view and into private, however, if I use the double post for the hinge side, the gate will have to open outward not inward. Do you worry about this when you build gates on residential property? Great, informative videos. Thanks!

  • @darrick1426
    @darrick14263 ай бұрын

    Thanks, bro👍

  • @7628739
    @762873911 ай бұрын

    Bestbin the business, look at the infinity hinge for future uses

  • @MrMikeX
    @MrMikeX Жыл бұрын

    So the low side of the angled brace nearest the hinges is required to be as close as possible to the hinges, or can it be a few inches away towards the center of the gate?

  • @spierotti14
    @spierotti142 жыл бұрын

    I understand the example of going over 45 degrees. Are there any pros and/or cons to going 30 35 40 degrees instead of 45 exactly?

  • @mrfenceacademy

    @mrfenceacademy

    2 жыл бұрын

    Less angle from 45 the stronger the brace is however depending on gate size you start to weaken the gate due to cantilevered gate past top of brace

  • @skudchad
    @skudchad Жыл бұрын

    How did you choose the size of the hinges?

  • @thomasvannatta2709
    @thomasvannatta2709 Жыл бұрын

    The cut from the open side (latch side) what measurement off the post?

  • @samuelalbritton2224

    @samuelalbritton2224

    3 ай бұрын

    Did you figure it out

  • @briangallegos2866
    @briangallegos28668 ай бұрын

    Should I make a double door for a 52 inch deck mower or a 5ft gate

  • @mrfenceacademy

    @mrfenceacademy

    6 ай бұрын

    yes

  • @hawkmanva
    @hawkmanva2 жыл бұрын

    What if my dimensions from bottom rail to top rail us 27.5” and the width of my gate is 48”. If I heard you right I would measure over no more than 27.5”?

  • @mrfenceacademy

    @mrfenceacademy

    2 жыл бұрын

    Yes don’t exceed 45 degrees

  • @hawkmanva

    @hawkmanva

    2 жыл бұрын

    @@mrfenceacademy thank you for reply. My first time building one. I never see the braces in the place you describe. They always go diagonally corner to corner. I want to do it right. If I do like you say I’ll have about 15” from the brace to the outside edge of gate over overhanging.

  • @jakenutt4687
    @jakenutt46873 жыл бұрын

    That's a strap hinge

  • @davycornell8715
    @davycornell8715Ай бұрын

    You should be a teacher bro!

  • @jimmyjunk2337
    @jimmyjunk2337 Жыл бұрын

    someone get this man a new pair of gloves

  • @rabakomaba4562
    @rabakomaba4562 Жыл бұрын

    There are many similar projects in Woodglut's plans.

  • @oldmanseeks
    @oldmanseeksАй бұрын

    Thank you! Great video, but the construction background noise is very distracting.

  • @user-oq6fu9pl6t
    @user-oq6fu9pl6t Жыл бұрын

    Man this guy no way has 30 some years experience I’ve got 36 years experience an never had a call back on a job I challenge u on any type fence speed straight solid and customer satisfaction I’ll challenge u for whatever job pays

  • @ironmike7339
    @ironmike73393 жыл бұрын

    Yea , weld a steel frame. That’s the ONLY way to build a gate! And better yet use steel posts. Wood warps and twists and is nothing more than a call back and loss of profit!

  • @mrfenceacademy

    @mrfenceacademy

    3 жыл бұрын

    Or follow the video and I can show you another way. Hahaha your choice