It was good to see it all come together. I know I’ve seen it all before, but I liked it. I’ve missed your metalworking capabilities.

A very Skilled Engineer at work!

Great job, extremely professional. I do like to leave the axle plate mount bracket adjustable. To allow for different length hard tails.

Such a masterpiece of a video. The pain of the damaged mug! The heartache of the snapped Tap! And the triumph of the finished jig! Kidding aside, this was really cool to see. I've always wanted to know how frames for bikes got assembled by hand.

@Urchfab

2 жыл бұрын

Glad you enjoyed it, Cheers

@johncunningham4820

2 жыл бұрын

BTW . That Engine in the Frame at the end is a Honda 750 four . SOHC , probably an early K-series Motor .

Es lo que siempre quise hacer, buen trabajo. Good job.

I have the starts of a jig at my workshop. One of them things that came up for grabs I got it and haven’t had time to even consider making it work 🤣

Brilliant really Urch-Fab

Now that is a nice piece of work! I'd love to have a workshop like that but I'd have to sell my house to get all the machinery. Then there's the fact that I'd have to spend a few months teaching myself how to use the Plasma Table! I've subscribed so I can watch more of your fantastic work! Cheers

Great work!

Hi Matt, Great vid as always. If I could give you one bit of advice it would be, chamfer all the holes prior to tapping. Chamfering after can have a slight tendency to mess up the top of the thread. Otherwise faultless work.

@Urchfab

3 жыл бұрын

Noted! Cheers mate.

Outstanding fab skills, just watched you build the bike. Just wondering if you are selling plans for the bike frame jig.? thank you.

love this non talky vid. nice job.v cool.

great build that was

Very clean 👊🏽💀

Nice job Matt that plasma table certainly saves a lot time, shame about the mug, still could always turn up a new one on the lathe👍

@Urchfab

3 жыл бұрын

Sure does mate.

Top content Matt 😎❤️❤️❤️❤️❤️❤️❤️

great job😊

Excelente trabalho.

Nice job. What's the milling machine?

Hey would make a video on bobber shadow frame?

can we build it up on top of a workbench?

I miss the angle grinder intro, bring it back!

Impeccable

next project. "How to Plasma cut and Weld a coffee mug" 😂

@peterwall9896

3 жыл бұрын

I've seen mug welding on bad obsession Motorsport

@BrianSmart1959

3 жыл бұрын

I'd like to see that!

@jeromeclements6532

3 жыл бұрын

Coffee cups and soda bottles have a short life fab shops, welding shops and machine shops. I've dragged them off benches and table with my TIG cable, knocked them over, knocked them off and in general broken them into pieces in 50 different way. I worked for several years where you could only have styrafoam and soda in cans. Made sense.

Hi, quick question, is your mill a Thiel? looks bigger than a Deckel, great mills

Looks alot cheaper than buying one my m8 had one made of I beams for building buggy's on but it took up most of the shed and needed a forklift to move it!

When is the next bike coming?

Subbed. Nice work.👍

@Urchfab

3 жыл бұрын

Much appreciated!

Parabéns irmão !!! Essa ferramenta é a mais bem feita que eu já vi !!! Você se importa de me dar o projeto para eu fazer uma ?

kreatif & ketrampil yg hebat 👍

Cool. Are you building more bikes, then...? Hope so...

Рядом чайник болгаркой почистил норм,накрыть не варик?

Excellent! But I should buy all this equipment at first and to improve my skills up to the same level! 😁

Is that pulsed mig?

Can I change the frame of a small regular bike to make it look like a Superbike?... I love superbikes but I can't afford them so I want to build myself a frame of a Superbike but using every other thing for Bajaj Boxer.

Saan po location ng shop nyo po

Kereen

Simplest way is to get a very good frame and build a jig round it.

It would be nice to get the drawings :)

That’s nice but we all don’t have access to a full fabrication shop

Rest in peace coffe🙏🥲

5:47 ...nice

Actually, this guy is not teaching me how to build my jig. He's just showing off all the damn tools that I don't have.

Ford Escort MKII spotted!

Chevette, Chevette, Chevette, Chevette! (ra ra ra)

That's great if you have all the fancy machines but what about the ones who don't have 100k worth of gadgets to use I did enjoy the video and be cool to be able to make one but I'm looking for how to make one without the high end machines

I feel like I've seen this video before 😉

That mug will haunt you when you sleep

The pain when the coffee mug broke 😭

An honourable way for a mug to go.

@imouse3246

3 жыл бұрын

No food or drink in the lab!

Are you using Inkscape to draw your parts?

@Urchfab

3 жыл бұрын

Emachine shop

The floor is level 🤣

@SalvageMasterEssex

3 жыл бұрын

That's what I thought, if I tried that in our workshop level would be off scale due to dodgy floor :-)

How much for all of the plasma cut sections UK postage 👍

@Urchfab

3 жыл бұрын

Il have to price that up bud.

@moderatefkr6666

3 жыл бұрын

​@@Urchfab That was essentially my question too. You do some Very impressive work here Matt. Is this jig for any particular type of frame? I would be interested in one that can do a variety of frames for adventure bikes and cafe racers, as well as road and race bikes. I don't have access to the machining facilities you have. I'm sure I'm not alone in being a potential customer.

Your ASMR fans are in heaven.

RIP coffee cup

nice thank you for sharing your video , greetings from the south of Mexico. How nice to have all the equipment to do it, those very sophisticated machines. not even working two whole lives could he buy one of them. Here the minimum salary the day in Mexico is 135 pesos all day, equivalent to 6.75 dollars. outside of my hands, I have only been able to buy a makita drill and I spent 3 years saving together with my wife

Bad coffe moment 😭

1:31 noooooooo

Tht spirit level shud say Bob on👍

Watch this video: kzread.info/dash/bejne/q6Nq27GrgLO-etI.html Message in English at 31:38 minutes!

Hey Matt, Hope you can check this video. The guy has the same plasma cutter you have and seems to be happy with a dry air improvement he made. I don't know where he is located but maybe you can go check his cutter's performance comparing it to yours. Might just be a help in your fabrication business. kzread.info/dash/bejne/oaJl2bCcipjJfdI.html Like the video and I had to laugh when I saw your reaction when you showed that cup again. Ed D

nice video of your fabrication process mate - shame about the cuppa

@Urchfab

3 жыл бұрын

Cheers.

Like

Helo 👏👏👏👏👏👏👏👏👏👏✅✅✅✅✅✅✅✅✅✅✅❤️❤️❤️❤️❤️❤️❤️👉👉👉👉👉👉👉🔔🔔🔔🔔🔔🔔🔔🔔

V

Poor thể cup

You are too fast, why not send a normal video

Step 1. But 80k in tools. Step 2. Find magic experience beans 🫘 Step 3. Return to school. Sounds easy enough