am i the only one that watched this full video with no intentions whatsoever to build a center console?

@chrisfix

8 жыл бұрын

+Allan Guzman Thanks for watching Allan! I appreciate that and hope you enjoyed the video!

@Outlawjunkie

7 жыл бұрын

Hey chris can you build me a centerconsole just like that with the same equipment except the siren. I'm getting a 2011 crown vic police interceptor for a Firefighter POV need a center console.

@A2BEDFH34F

7 жыл бұрын

ChrisFix your the best!

@BXKVSF

7 жыл бұрын

Nope

@Melanie_fan408

7 жыл бұрын

Nope

Just to answer some questions: The inside of the console is not done, I have some cool ideas for it but I need to run the ideas past the officer. Next, The lid needs to be fixed. I did not account for the extra foam on the side, just the wood thickness so it looks "off" which is why I think some of you think it looks "ugly". Finally, I appreciate the feedback and hope you guys enjoyed the video!

@mcmcolm

8 жыл бұрын

For the inside, I think if you used the plastic that you used around the switches and form an inner box that would cover the vinyl and staples. This would work well on the inside of the box lid too. Maybe use black countersink screws. You might even be able to hide the hinge this way. Failing that, you could use very thin carpet (we call it office carpet, dunno what they call it where you are) glued to the inside.

@chrisfix

8 жыл бұрын

+mcmcolm Good idea!

@Joey-rr7cl

8 жыл бұрын

+ChrisFix Thanks for the update. I had a feeling you had more in store. Now I cannot wait to see what it might be.

@xiingli

8 жыл бұрын

+ChrisFix All good, Chris! Appreciate you taking the time to make videos. I'm sure documenting this process wasn't the easiest and of course, we all make mistakes. Keep up the great work!

@Cm-hn2yh

8 жыл бұрын

When will be the next episode of project police??

I followed the instructions but accidentally made an ejector seat and now I'm stuck in a tree.

@chrisfix

8 жыл бұрын

+Trakker I guess I need to make a video on how to build a jet pack to get you down!

@zXHAcKeRzXz

4 жыл бұрын

Instructions unclear, married cat

@fattratt0

4 жыл бұрын

You still in the tree or did you get yourself down 4 years ago

@connerbeaudry5624

4 жыл бұрын

@@fattratt0 i checked, hes still there

@fattratt0

4 жыл бұрын

@@connerbeaudry5624 XD

You gotta admit he's creative

@fazesway81

4 жыл бұрын

He is

@echesssssssss8717

4 жыл бұрын

Thats why his channel is running

@timhunt5764

3 жыл бұрын

And handy

@Sharish747

3 жыл бұрын

Yeah I agree

@wieletjies

3 жыл бұрын

Nope the best

I don't know why I watched this I own a motorcycle

@Real_MisterSir

7 жыл бұрын

I actually have a "center console" on my motorcycle xD Or well, the tank acts as the console and there is a storage space with electronic lid in the top of the tank ^^

@y0tam1

7 жыл бұрын

Daniel Kemnitz good luck doing that on a SMC690 😂

@Real_MisterSir

7 жыл бұрын

mine is a Pegaso 650, so not too far off from dual sports and adventure bikes :D But yea, it would be a bit awkward on an SMC690 xD And man, you don't want to let your dreams be dreams. Just do it!XD

@YuriT1296

7 жыл бұрын

Yotam K is it right hand drive?

@sookoll23

7 жыл бұрын

I own a car but it already has a good center console. Huge storage space and 2 (mediocre) cupholders that come out of the console. Also works as a really good armrest. I have no idea why I watched this.

not entirely sure why everyone is hating on the quality lol, last time I checked he's a mechanic not a carpenter .... nice job, IT GOT THE JOB DONE. awesome Chris. we still, all learned something.

@chrisfix

8 жыл бұрын

+Keith Thanks a lot!

@zeroze61923

6 жыл бұрын

He's also a cook the guy does it all

@mousetoad7040

5 жыл бұрын

Sometimes good enough is good enough! It's not a show car! I'm gonna try to get mine to look a little better, use a cloth backed vinyl and a heat gun. If I don't like it, THEN I'll spend the $250 and give mine to my kid for his jeep. If I like it, I'll help him build one too! I reupholstered the convertible top on my '57 Tbird (not a show quality car but a driver). Used a how to video I bought and it turned out good enough for me. Saved a ton of money and allowed for shrinkage. The pro's would have gotten a nicer fit but it wouldn't have lasted once the vinyl started shrinking. Happened to my dad back in the day had he had to redo his himself!

@ThatBiohazardGuy

4 жыл бұрын

Personally I thought it was ugly at first, but once it went into the car it looked amazing.

I know you probably won't see this comment, but I love the amount of positivism and enthusiasm you put into your videos and into your work. Thank you for doing what you do Chris. I appreciate it.

@chrisfix

7 жыл бұрын

Thanks a lot man! I appreciate the support!

@andrewl3847

6 жыл бұрын

Levi he did see it. 😂 😆 😝

@eugenechang9827

5 жыл бұрын

Yep

@RylanB6FN

Жыл бұрын

Congrats on him commenting on ur comment

in europe we put a gear stick right there :D

@chrisfix

8 жыл бұрын

+yaron algoet (YARAL10) Nice! You can always make a hole!

@yaron1998

8 жыл бұрын

thanks for the tutorial :D

@el_famoso_albatar

6 жыл бұрын

And a handbrake. :)

@brucelouie2186

6 жыл бұрын

I think it is automatic transmission so it doesn't need one

@makzimoe7283

6 жыл бұрын

Usually in North America we have ours there too! But with police cars, they relocate the gear stick to the dash. But in minivans and some trucks, they are on the dash from the factory. Example, My neighbor bought a retired police ford explorer from 2014 and the gear stick was on the dashboard but the same car, for civilians, had the gear stick on the console! :D It's kind of dumb but they need their radars and light controls and custom switches and blah blah blah all that stuff there. also, everywhere in the world has at least a few cars that have the gear stick on the dash but still all country's have the majority of there cars with the gear stick on the center console.

All this work and no cupholders!

@waynerhea6649

8 жыл бұрын

+Hermit527 the car already has cup holders that come out of the dash board

@AC-pm7sn

8 жыл бұрын

You can see them right in front of the toggle switches. They pull out of the dash.

@TreOnTheBeat

8 жыл бұрын

L

@Ajdero5

8 жыл бұрын

Yeah but more is better you never know what your going to use them for

@chrisfix

8 жыл бұрын

+Hermit527 It has cup holders in the coin tray.

I bet the cop you did all this for was thankful for all your work. I also hope that he watched your videos too

"Whoop whoop whoop" 😂 that sounds like me. 😂😂

@stormy1994

8 жыл бұрын

+Cecilia Warren idc

@ceciliawarren7339

8 жыл бұрын

+Skiddit um, did I ask for your fucking opinion? Nope. Goodbye irrelevant ass. I don't give a dam that you don't care. Fuck you.

@billjammin5325

8 жыл бұрын

+Cecilia Warren maaan

@Drizztt

8 жыл бұрын

+Cecilia Warren attitude lmao xd

@blake1995

7 жыл бұрын

Cecilia Warren obviously you do cause you responded back

Its so funny when you say, “its all that simple” 😂

God took his time when he decided to create you. You're the reason why I've gotten into learning about cars.

@coolmw2player

8 жыл бұрын

there is no god

@robertbaratheon4621

8 жыл бұрын

+eduardo rodriguez god must have dropped you when he created you lol. it was a compliment you buzz kill.

@JillyBean860

8 жыл бұрын

Me too, Robert!

@JillyBean860

8 жыл бұрын

Chrisfix taught this girl how to change her own oil and replace the filter.

@FlixTV101

8 жыл бұрын

+eduardo rodriguez stfu, no one asked you anything

Very nice work Chris. A lot of work went into making that center console. You can buy some really nice ready-made center consoles for around $100. You can buy one, then modify it, which is what I would do. You can use corner brackets on the inside, rather than screws on the outside.

@internetclown8412

8 жыл бұрын

That would work. as long as the screw doesnt come out tye other side. That wouldnt be good

@tysonhosmann1591

6 жыл бұрын

You’re crazy it looks like shit

@BH-nf5lv

6 жыл бұрын

Tyson Hosmann you know damn well you don’t know how to start in building a center console

@ex-perisonyt8005

3 жыл бұрын

@@tysonhosmann1591 OHHHHHHHHH he cursingg man he cursingggg

@shin3417

3 жыл бұрын

@@tysonhosmann1591 ok make a center console

what are those buttos and switches for? and did he ever connect those cables??

Its amazing what you can achieve with a little creativity and patience.

@chrisfix

8 жыл бұрын

+argonian bilbo Exactly! That is what my videos are all about! Going out of your comfort zone and trying things for yourself!

@EarthStory

6 жыл бұрын

That's the only place you can find growth! Man you're equipping me with so much knowledge for the rebuild of my campervan.

cool, but you should sand the edges of the plastic deck as well, and round the corners on the front of it

@chrisfix

8 жыл бұрын

+OG Saldus That is a good idea! Thanks!

@PKedByBlade

8 жыл бұрын

:D

Who needs a center console when you can use a milk crate

@pennervideosohnegeld7576

4 жыл бұрын

ONE, NO MORE

All these people telling you to buy a factory made console don't understand the satisfaction of making something on your own. Honestly the console has exceeded my expectations and I think it looks amazing, especially with minimal tools and cheap materials. Great work, my friend!

@chrisfix

8 жыл бұрын

+SleepyChow Exactly and thanks a lot bud!

Hey Chris. I love the videos. Just some tips from an upholsterer. Keep those staples close and flush with the fabric. Don't angle the staples or it has an increased risk of coming apart. Stretching the foam over the edges or edge stapling the foam to the wood will help it to look cleaner. I upholster chairs and sofa consoles at La-z-boy. Keep up the great videos.

Chris I'm glad and really happy of your youtube success.... I came across your channel 1 day when I was bored looking at oil change videos and I subscribed... I was there when you had less than 20k subs.... However with the success comes the ugly side of youtube.... The Trolls!!! please understand that you are awesome and we appreciate you keep the great work up!!! Thanks for being you!

@JillyBean860

8 жыл бұрын

I agree with Arlind. You're my favorite KZreadr!

Chrisfix- I would have never thought of tackling a project like that. Now that I've seen it I might try it out in the future. You did great work on this one and you always hang it out there. Keep it up! Thanks for the inspiration.

@chrisfix

8 жыл бұрын

+Pattyp Thanks a lot bud! The only way you can fail at something is to not try it at all! It is a lot of fun to see what you can come up with!

I am so glad someone thought of doing this video. I am bidding on an aftermarket console from a police department in Ohio. It is an auction site. If I lose that auction, I will be building some variation of what you made. I work in security and direct traffic for utility companies. I have lights in my car that I use for those jobs and will be hardwiring all of it. I also have other equipment that will go into the console. Thank you.

Ive been following you for about 5 years now. Ive never posted a comment on ur videos. The thing i have to say is, you really deserve what u have achieved so far👍 keep up the good work👍

It's also going in a cop car. So it doesn't need to look that beautiful. Just needs to get the job done. What Chris built gets the job done and then some. It's not a rolls Royce folks.

@s1bulka

8 жыл бұрын

+TJC450 Thats not a great mentality to have. So what it doesnt need to be beautiful, you should still make it as good as possible. Considering he is building that car to a client.

@rmaul2469

8 жыл бұрын

+MrMotaEST your not gonna home make it if you want it really nice. He made it to get the job done

@Blake.Seifert09

5 жыл бұрын

True

@BlueOvals24

4 жыл бұрын

@@s1bulka But knowing Chris, he's probably doing it for free. And most cops aren't gonna care how pretty it looks as long as it works.

@durexwow4645

4 жыл бұрын

@@rmaul2469 you can custom make one at home that looks way better then factory, just follow a proper upholstery video to get better techniques. chris just covered the basics and not very well. but hey, he got the job done.

i love how he has random car rims in his living room

@ThatWolfWithShades

4 жыл бұрын

I think those are from the Jag he parted out.

@davidwells4267

4 жыл бұрын

@@ThatWolfWithShades no this video is a couple years before that

Something is extremely satisfying about watching this... I feel your excitement Chris!

Ooook after watching around 150-200 videos from your channel in the winter I cannot wait for the spring to come to do modifications on my car 😃

awesome job Chris! can't wait to start my automotive journey in a few months!

@chrisfix

8 жыл бұрын

+raphael crousset Thanks a lot! I am glad you are excited to join the community!

holy smokes.. why are you so genius Chris? lol

your excitement for your work really shines through man! I got so hyped just watching

Great work. I am designing one for my Ford Taurus. I am going to have some curved panels, but I use to this along time ago. So your video help freshen my mind. Thank you. I think I will put a couple of cup holders in the place you were talking about putting a phone holder.

Hey Chris, This was very thorough and it taught me a lot. Great job man! One thing tho, what if you had used a memory foam for the padding? Any downside to doing that instead of just regular foam?

@chrisfix

8 жыл бұрын

+zzzhuh Thanks! You can use memory foam if you want.

Love how he just hit the siren buttons and made woo woo woo noises xD

@chrisfix

6 жыл бұрын

Woop woop

I can't wait to see the finished version! I really think you should round off the corners just a smidge on the switch plate. I think once you reshape the lid to line up right... it'll look great. The corner folds on the fabric only look frumpy due to the mis-matched width of the lid.

Good work my friend! Bang up job! I would suggeset getting one of those slip resistant mats that you typically put in your tool box or on your shelves in the kitchen to give a little bit of friction. That way the officer can put any size and type of device on that mat in that open space so they can directly look at it while driving and not worry about it sliding off when turning sharply. Great job man!

Who watches these but never does them?

This is honestly my favorite KZread series keep up the great work

@chrisfix

8 жыл бұрын

+N.D.M Beast Mode Thanks a lot! More to come!

Even though i might be the only one watching this 2 years later note i already watch this but i like his videos so i like rewatching them. 90% of the people here are not going to build a center console but we watch this becsuse you are so entertaining love you bro.

Thanks alot Chris! I just got a 61 Chrysler imperial and alot of your videos have been helping me restore it. So keep up the great work! And thanks again!

That's awesome Chris I'm gonna do that in my old car. Keep up the good work!

@chrisfix

8 жыл бұрын

+JP Yanez Awesome man! Make sure you take pictures for me! I want to see!

Can't wait for all the wiring, that's what I'm really interested in. The console looks good, but the screws in the plastic stand out, maybe use flat heads instead and paint them, or cover with some plastic caps?

@dynocompe

8 жыл бұрын

+Choujeen thats why he used stainless screws because they are more appealing to the eye, you could use black screws too but then it just looks like you tried to hide them and it didnt work. I like the stainless look myself.

Some people say it looks bad, but to be honest I like it. It's very utilitarian and fits the police style very well. Nice work!

what kind of screws did you use exactly, to secure the console? Mine was kinda loose in the car. Now I want to put it back in but don't want to damage the transmission body or something because of wrong screws.

Dude this is a great video I love this type of stuff

That does look nice I'm not going to lie. Nice work, Chrisfix...

These videos were really helpful. I bought an older Honda Element which could definitely use some extra storage and elevated cup holders between the front seats. Glad to know I wasn't too far off in my approach -- I was planning to make a cardboard mockup too. :-)

I don't ever work on my car myself or build add ons to my car but this video was so entertaining and made me want to watch all the way through. Great video bro!

@chrisfix

8 жыл бұрын

+caleb fiess thanks a lot. You should try a small project one day. Not only is it fun, it's rewarding when you finish!

Who else wondered how many times his staple gun ran out

I really want to see the police officer's reaction to his car lol

@chrisfix

8 жыл бұрын

+Lizard818 Same. I have yet to see him in person. I just drop my truck off and take his car

Dude that is so awesome, I've been subbed to you forever and every time I mosey over to your channel I'm blown away. Awesome job and thank you for sharing all you do!!!

Hey chris I want to build a center console but i have the handbrake in that place what do you suggest

i've been waiting for this

Hey ChrixFix, I'm glad you're doing another police project car video after that. I think you can touch up and improve the center console a bit more, such as hide the staples from sight by putting plastic on the bottom of the flip cover, and the interior walls of the storage area. The storage area is deep, although I'm not sure if it could be utilized all that well. Could you show us how to add rear AC vents to the center console and make some kind of shelf storage system and add racks which would be more useful? Police Project Car Videos are always awesome, I'd be looking forward to Part 3 of center console with fine-tuning and maybe even an AC attachment!

Hey Chris, I drive an 87 Cabriolet, and my ebrake sits where I would install a center console, how could I work around this? thanks for your time!

Hey chris. I own a 2002 Ford Ranger Edge very similar to your Mazda and I have done so many repairs because of your videos alone. Love your style and youll be at a million subscribers before you know it.

i like it good job chris :)

Coming from a cop, I would let you work on my patrol vehicle any day!

@chrisfix

8 жыл бұрын

+darryl sawyer Thanks a lot man! I really appreciate it!

Idk why but whatever he makes or works on turns out SOOO much better than you thought

Can't wait to see the full car all set up already. Will we ever see more of these police cars made that would be very cool to do.

you might want to round the edges on the plastic where the switches are, so he doesn't hit his knee on it

Personally, I think gluing that front piece in would've helped ensure it was securely in place. I think spray painting the inside of the armrest black would've been a nice touch too. Otherwise, this turned out pretty great - good work.

@dmayse1000

8 жыл бұрын

i wouldve at least put a couple of screws from the bottom up into the front piece and used the abs plastic screws on top

@chrisfix

8 жыл бұрын

+Peter Schmidt There is no reason to glue the front piece. It allows for quick access to the electrical wires when it gets wired in. As for the inside of the arm-rest, you could do more if you want. That is all up to the individual. In this case, I am not sure what the officer wants. maybe he wants a gun holster in there or something like that so I did not finish the inside.

@dmayse1000

8 жыл бұрын

+ChrisFix i still thought it looked cool though

@Toastmaster_5000

8 жыл бұрын

ChrisFix True, the quick access is definitely handy.

watching these videos is just learning weird niche things you may never have to do, but you will know how! love this channel

hi, i am interested about a Mitsubishi Colt from 1995 to buy, the car have the 1,3 liter mitsubishi mirage engine, but the interior handrest it's a built in, could you give me some ideeas how to build something from wood as you do with the police car project?

"small cut" proceeds to make a 3 inch cut. Don't bully me tho lol I love you

"The lid" 😂

Hey Chris, what lights do you have bolted to your B3000's front bumper? I'm wanting to place a pair of really bright spotlights behind my grille for seeing deer and such. Harder than you might think to find a decent set that wont' break the bank lol

You're my hero chris. Thanks for your really explained videos that helped me to decide to fix car in the future. Right now I work in a restaurant. Thanks.

Where's episode 5? Dude. Also you should put a speed radar in this thing!

@chrisfix

7 жыл бұрын

kzread.info/dash/bejne/Y2F6krKCdpuuodI.html

All respect to you

That looks really good Chris. You make working on my car much more fun than it used to be! 👍🏻

covering panels with fabric is similar chair/ottoman covering. adding that bit more of detail really brings a great touch of class.

Is it me or does this look awesome or what ? Way to go Chris, another job well done. Thanks for sharing friend.

@chrisfix

8 жыл бұрын

+Steven G Thanks a lot Steven! I really appreciate it!

@sgwhite4

8 жыл бұрын

+ChrisFix you're more than welcome

Hi Chris when is the "How to buy a used car part 2 coming out"

@chrisfix

8 жыл бұрын

+chris smith Some time this month!

@chrissmith2501

8 жыл бұрын

+ChrisFix thanks man I'm excited

@FiladelfiaStudios

8 жыл бұрын

Same I'm waiting

@chrisfix

8 жыл бұрын

+chris smith Me too!

@chrissmith2501

8 жыл бұрын

+ChrisFix btw congrats on your KZread channel :)

Awesome job Chris! Some of the best workmanship on this channel. Keep up the good work bud. I have learned quite a few tricks from you and I look forward to more!

@chrisfix

8 жыл бұрын

+9 ToedSloth Thanks a lot!

Chris, check into how to stretch a canvas to a frame for painting. Use that technique for stapling, it makes for an even stretching and reduces wrinkling. Basically you start from the centers and work your way to the edges. Some more of that abs plastic would be great to use as a bottom and sides for the insides to cover the wood and cover the staples as well.

@chrisfix

8 жыл бұрын

+ggin nj Thanks for the tip!

Is very sad that lots of the comments are negative, but what makes it even sadder is the amount of hate in those negative comments. We all know that Chris not a pro, and if ya don't like the videos simply don't watch em. Save all that negative $#!7 🖕

@miskatonic6210

8 жыл бұрын

No, why?

@OjStudios

8 жыл бұрын

+Cesar Ramos Totally negative hate comments are stupid but criticism ain't.

@TravisClan

4 жыл бұрын

I like constructive criticism, but hate is never called for

Holy cow when you were using the sandpaper it looked like you were The Flash

@chrisfix

8 жыл бұрын

Maybe I am ;)

@Lil_T4L4N

8 жыл бұрын

ep 5 its been like 5 months

I've been thinking about changing my seats in the ranger putting bucket seats in and wanted to make a custom console great video gave me great ideas love your videos I have learned more from your videos than I did in high school rock on brotha

@chrisfix

7 жыл бұрын

+KhaspaFilms awesome man! I'm glad the videos are helpful!

@ItzRobbie96

7 жыл бұрын

ChrisFix only thing is I wish I had a drift track lol

I personally would line the interior of it with the ABS plastic over the cloth. Great series, man!

if you feel like chris didnt do a good job on the console, then upload a video of you building one

@rubencardoso6830

4 жыл бұрын

Agree this guys taught me a lot love his videos

in this empty space should be place for cup or bottle ;)

yes i want to make one for my truck. its a single cab 5 speed manual. do u have a video of when u made it for ur truck

It looks great Chris! Keep up the good work and the awesome videos!

But wheres the cupholder for the donuts and coffee XD

@DirtiestFish

4 жыл бұрын

ah yes the donut cupholder of course how could he forget

@atarvhegde5210

3 жыл бұрын

Why does this crown Vic have a gear selector in the steering?

Now would ya just LOOK AT IT

Wow, I don't even need to build a centre console but I watched the entire video because it was a really informative and well made video, great work man :)

@chrisfix

8 жыл бұрын

+NickFennessy Thanks a lot Nick! Glad you enjoyed the video!

I don't understand why there is so much hate on this video, it looks super good to me and I'm considering making one for my bronco! good job I love your videos keep it up. One thing I can think of that you could do is install some velcro to keep the lid from opening over bumps.

I couldn't do this.. Too OCD I would freak over every wrinkle.. And I wouldn't have any idea what I'm doing but... Those wrinkles...

@cookiesw9270

5 жыл бұрын

I haate working with leather, canvas and thouse stuff aa the wrinkles and it never turns out as i expect

It was a nice job. Just wish you didn't leave the inside showing bare wood. Makes it look unfinished.

@chrisfix

8 жыл бұрын

+TJC450 It's not finished inside because it is not finished in general. Needs to get wired up and the center console is going to get fixed up.

@TJC450

8 жыл бұрын

+ChrisFix Cool! Looking forward to it.

Could you also add some cloth since there is no soft surface in the inside of the center console?

I am in love with this channel , not only because the amazing DYIs. This guy has the perfect detailed instructions

@chrisfix

8 жыл бұрын

Thanks a lot man! I am glad you enjoy the videos!!!

in one part of the video he goes makes sure dont have a hard edge. that's what she said.

@emergencystuff

8 жыл бұрын

😑😑😑😑😑😑😑😑😑😑😑

@chaoszombie9995

8 жыл бұрын

Damn

@etaybokish

8 жыл бұрын

Matt

should of spray painted the inside black still looks good

@Aj_0400

8 жыл бұрын

+Kevin Tinajero That Or The Plastic He Used To Mount The Switches

@chrisfix

8 жыл бұрын

+Kevin Tinajero Yea, you can always do whatever you want on the inside. I personally like the wood but that is the whole point of custom!

Electric staplers at Lowes for like thirty greenbacks bro. Amazed me the first time I used for porch screening. Two thumbs up!

hey chris i have everything ready ( i also took cup holders from my old car) would wood glue work for the foam? i cant find the stuff u used

@chrisfix

7 жыл бұрын

You can probably use wood glue for the foam.

The upholstery needs some work, but other than that, looks awesome!

@chrisfix

8 жыл бұрын

+ComandanteJ Thanks!

Extremely ugly, but also extremely useful and fun to do! like!

@chrisfix

8 жыл бұрын

+Ricardo Iarossi thanks Ricardo

Awesome video Chris! It looks really good. I'll definitely try this out on my truck!

Unrelated topic but: Have you ever changed the head gasket out of a Subaru? '04 Legacy - I'm fairly handy but this job seems daunting. Any thoughts?