Awesome good!! Stitch and glue boats are fun to built. Just a word of caution based on previous experience with stitch and glues: try to avoid trailering with outboards if you can on smaller boats. I had an issue with transom cracking from sides even with reinforced corners. Ended up welding a mount to front of trailer to attach 5hp while towing.

Simple, to the point video. Nice boat. Nice job. Thanks for sharing.

Молодцы ребята. Классная лодка получилась. Лайк 100%👍

nice job, i like what you've done and how to the point the video is. thanks for sharing

That's really impressive, and informative, without the waffle. Good job.

I thought Philippines the first few minutes of the video. My wife is from their, it's my favorite place to be, no better people in the world, and no prettier country on Earth. I really appreciate the video, I want to start my on boat soon. I want to start with a wood frame like this one, but I want to reinforce it a bit, and coat the hole boat in fiberglass so I can use it to hold my airboat motor and frame.

Useful video, i was searching it because here in italy it's raining too much and my mother was thinking "hey we should buy a small boat for when the streets are full of water". Personally i should have mounted a motor, the hooks for the rows and a tube in the center for a sail, but for a video tutorial it could be too much😅

Brilliant, this is def something Id love to try, great job

Best godanm video on the internet

@elviejo4744

2 жыл бұрын

ikr, absolutely would recommend

Great new boat.this is the nice clip.

One of the Best builds i have seen. Great job !

Freakin Sweet! Good job. Thanks.

I'm currently building one similar and your video has been crucial so thanks heaps

parabéns ficou um ótimo projeto.... parabéns!!!

thanks a loot for instructions.... nice video!!

Well done. Thanks for the video.

@terrybyrd1690

4 жыл бұрын

Guys I found a very good website about "boats building" that is *BoatPlans.4YourHelp. Com* (remove space and open the website) this website contains more then 500 boat plans. Recommended

It gave me knowledge. Thanks now I have the idea on how to built a ship project for my assignment.

Wow this is awesome, thanks for the video dude!!!

@mharry1077

4 жыл бұрын

Thank you Martin for releasing a great product as this Check Details Here t.co/kQ5Ho0n9fD Most of the plans I have imagined in my mind are put down on your boat plans. This is more like a genius job. I love it!?

Looks like it didn't draw that much even fully loaded great build

@stuartsmith4723

4 жыл бұрын

*@John Harrison* If you want a huge collection of boat plans go here now: www.BoatPlan. xyz

Nicely done!

great boat by the way!

Cool! I’ll give that a go. Living in the Philippines for about 7 years now and thinking of doing a boat project.

@williamspencer1869

3 жыл бұрын

Tony Yo! I lived in Napu Talisay Cebu 10 years, back in the states for 5, what area do you stay?

@tonyyo1312

3 жыл бұрын

@@williamspencer1869 I'm in Pangasinan and the beaches aren't that far from me. Specially Dagupan

@tonyyo1312

3 жыл бұрын

@@williamspencer1869 From Northern Virginia. Smack in the middle of D.M.V.

@cdonatias6504

2 жыл бұрын

check this boat kzread.info/dash/bejne/eGdlsM2MerW2gco.html

Just amazing. You can make more and sell them, that boat looks AWESOME

@gewibu

7 жыл бұрын

Pinoys don't like it because it has no "wings"

@jeronimomurruni

7 жыл бұрын

livinginthailand What a shame :(

@amritasookham3055

7 жыл бұрын

That is a Trinidadian boat , and i need one for my johnson evinrude 6hp outboard

@randakapuas7047

4 жыл бұрын

@@amritasookham3055 kzread.info/dash/bejne/mYSY1ah7lZqdhaw.html

Ingenious, necessity is the mother of invention.

I am just starting constuction of a very similar boat from plans purchased in the 60's. Mine will be 12' and I want to power it with a 6.5 long tail. Hope my boat turns out as yours did. Very nice.

@gewibu

5 жыл бұрын

Sure. 12' is the better size and easier to handle

@cdonatias6504

2 жыл бұрын

check this boat kzread.info/dash/bejne/eGdlsM2MerW2gco.html

hermosa embarcacion , felisitacines.....

Ótimo trabalho parabéns ficou lindo 👏👏👏👏👏👏

This is awesome, really enjoyed watching it.

this video is the best video ever

Good job!! I hope you enjoy your day ♡♡

amazing love the video ✌👍👋🙌👏❤😃💡🆗

that's perfect!!!

awesome build boat technic

@cdonatias6504

2 жыл бұрын

check this boat kzread.info/dash/bejne/eGdlsM2MerW2gco.html

Nice boat. I will build one too 🤗

Great job and video

Elle est super cette méthode dite du cousu-colé. Bravo.

How long time this boat can use?

I was thinking that keel wasn't gonna do much. Glad you doubled it up. :)

@gewibu

5 жыл бұрын

Yes! It's also good to protect the bottom when the boat runs on ground in shallow water.

Parabéns ficou muito bonito Show de bola.

@cdonatias6504

2 жыл бұрын

check this boat kzread.info/dash/bejne/eGdlsM2MerW2gco.html

Great job, I love it! Do you have the dimensions that you used for the bottom, sides, and back pieces?

@gewibu

5 жыл бұрын

You'll find it in the description of the video.

@JDeWittDIY

5 жыл бұрын

Thank you very much. I'm not sure how I missed that!

@maribelamancio1993

3 жыл бұрын

No

how tall are the sides of the boat???? i like it alot

Thats awesome. I would love to build this boat

I'm still looking for the video where you have an 8 hp outboard on it can't find it?

@gewibu

6 жыл бұрын

kzread.info/dash/bejne/gpxos6-Aks67ZNY.html

Excellent Design and Build !

@cdonatias6504

2 жыл бұрын

check this boat kzread.info/dash/bejne/eGdlsM2MerW2gco.html

Great job! When do you remove the cable ties along the edges of the panels?

@gewibu

5 жыл бұрын

Same answer as below: You glue the inside of the boat first and the cable ties stay in place. They should be covered by the epoxy. When it comes to the outside, the inside part should be dry and hard and the boat sticks together. You may then cut the remainings of the cable ties at the outside or grind them away when you round the edges before you attach the fiber and epoxy. Attaching the epoxy and fiber should be done in one workflow. Inside first and outside the next day or later.

Congrats you guys did a great job. Bon voyage.

Hey good job you guys,……. from New Zealand.

@kinggeorge4025

8 жыл бұрын

+Bill Blast Hi Bill thanks for the reply, sorry about the place of residence I don't usual comment on the computer. I use to make and repair a few boats of similar. I think they were from Hartley plans back about 1960, I like your design……Barry

@cdonatias6504

2 жыл бұрын

check this boat kzread.info/dash/bejne/eGdlsM2MerW2gco.html

excelente Trabajo. !! gracias por compartir. !! ...puedo hacer algo igual. es genial

@atss2012

7 жыл бұрын

Rodi Morel

Nice job!

@malasarma1812

5 жыл бұрын

I'm not sure but ,if anyone else needs to find out about build your own sailboat plans try Joolaim Rudder Replication (search on google ) ? Ive heard some interesting things about it and my work buddy got cool success with it.

Nice build just needed a little bit more sanding for the uneven surfaces on the outside. Epoxy is not the easiest thing to sand and even out.

Nice work mate! I hope my comes out as good!

@cdonatias6504

2 жыл бұрын

check this boat kzread.info/dash/bejne/eGdlsM2MerW2gco.html

what's the frame chopped down to after constructed I can't find the measurements and it certainly looks chopped

@gewibu

7 жыл бұрын

Don't know what you mean. Nothing was chopped here...

good job

I'm in the planning stage right now, can you please specify the thickness of the frames? Can't find it anywhere. Thanks edit: I have another question, how did the sides react to bending after you glued the butt block? I assume it wouldn't want to bend in that area due to the epoxy and the additional thickness?

@gewibu

3 жыл бұрын

As for the frames: You can use 1" x 2" (20mm x 40mm) battens or 12mm plywood. Bending the sides with the butt block is not a problem. It's only 6 mm plywood. Please visit boatbuilder.gewibu.com for more infos.

Nice boat. I want to build a catamaran in the Philippines

Nice to know the current state of the boat. Will you be building any boat soon?

@khancrow8212

3 жыл бұрын

this thing no longer exists....

Hey vielen dank für das tolle Video, wir hätten noch eine frage bevor wir anfangen uns auch ein boot zu bauen. :) Wie kommt ihr zu den Maaßen von den Frames, oder ist das egal wie breit sie sind ?

Great video you guys.

Amazing work on the boat! I am genuinely considering building a similar style dinghy with some friends of mine and have been searching for the plans that you said you found online for a few hours. Do you happen to still know where you obtained your plans?

@gewibu

7 жыл бұрын

koti.kapsi.fi/hvartial/wpunt/wpunt.htm

@Abomb5991

7 жыл бұрын

+livinginthailand Thank you very much, Sir!

@davidrundberg1096

6 жыл бұрын

Scipius fm like

@buildyourdreamboat7521

6 жыл бұрын

Great job!

@rayu1highlights981

6 жыл бұрын

FAI CADOA

Well done

do you have measurements of the cut out parts?

@gewibu

5 жыл бұрын

Please look at the corresponding website for the plans: boatbuilder.gewibu.com/

Hi! I was looking for simple/sturdy boat plans and this video seems perfect. I found the original plans you modified, as well as your plans, but I can't find a weight limit anywhere... What is the maximum weight you have ever loaded the boat with, and how much weight do you think the boat can hold overall? Thanks for your video, and reply!!

@gewibu

5 жыл бұрын

Don't know where the limit is. I put up to 5 people inside with a max weight of about 350 kg. Thus the boat is full already. However, in the Philippines they using similar boats as transfer boats from shore to bigger boats and they load them with 10 or more people + luggage. www.alamy.com/tourists-travelling-to-malapascua-island-from-cebu-transfer-from-a-large-vessel-to-a-smaller-one-to-reach-the-island-image227289750.html

@AndreloXR

4 жыл бұрын

Hey friend! do you think you can link the plans? I really want to attempt to build a boat and this seems like a perfect start. Thank you! :)

Super bonito el bote,

The plan was downloaded from the internet? What do you type in to find it... ' "15 ft or 4.5 meter dinghy or fishing punt"?

@gewibu

6 жыл бұрын

koti.kapsi.fi/hvartial/wpunt/wpunt.htm

“And the inside is completely dry!”

Would something like this need a trailer or could it go on the roof

@gewibu

6 жыл бұрын

It might be a little too big for the roof! However, it needs 4 people to carry it over a distance.

Very cool video

@cdonatias6504

2 жыл бұрын

check this boat kzread.info/dash/bejne/eGdlsM2MerW2gco.html

fantastic

If im right you used 2 length of plywood with the entire length of the boat, how you joint/connect the plywood?

@gewibu

4 жыл бұрын

Yes, you are right. You can read here how to do it: boatbuilder.gewibu.com/how-to-make-a-long-panel.html

Sorry me can I ask something what (glue ) are you using please respond

@gewibu

6 жыл бұрын

No glue, only epoxy

BEAUTIFUL. So good for the soul. ever going to build a sail boat? please? thx!

What happen with the cable ties ones you start with the epoxy. You just cover them with the epoxy ? But that will make bumps .

@gewibu

6 жыл бұрын

You glue the inside of the boat first and the cable ties stay in place. They should be covered by the epoxy. When it comes to the outside, the inside part should be dry and hard and the boat sticks together. You may then cut the remainings of the cable ties at the outside or gind them away when you round the edges before you attach the fiber and epoxy. Attaching the epoxy and fiber should be done in one workflow. Inside first and outside the next day or later.

@Josef_R

3 жыл бұрын

@@gewibu You're supposed to fillet short sections around the ties, then remove them and finish filetting.

This is amazing.Did you use marine grade plywood? Where to view the current state of the boat? I'm about to start building a carolina in Thailand.

@gewibu

6 жыл бұрын

Sorry, this boat was built in the Philippines

@cdonatias6504

2 жыл бұрын

check this boat kzread.info/dash/bejne/eGdlsM2MerW2gco.html

I think I'd sheath the outside with fiberglass & epoxy because its tough and not easy to puncture...what do you think?

@gewibu

6 жыл бұрын

Do what ever you like. It makes it more tough as you say but also more expensive. Plus it's a lot more work. If I had to do it again, I would cover the floor with fiber & epoxy.

Salamat

Great build. Can I have the plans for this boat?thank you

@gewibu

3 жыл бұрын

Hi, please go to: boatbuilder.gewibu.com to find all the infos you may need & also a link to the plans

Nice boat bro👍👍👍

@cdonatias6504

2 жыл бұрын

check this boat kzread.info/dash/bejne/eGdlsM2MerW2gco.html

nice boat

@cdonatias6504

2 жыл бұрын

check this boat kzread.info/dash/bejne/eGdlsM2MerW2gco.html

That's an awesome boat you built there, what kind of epoxy did you use, and approximately how much did u use?

@gewibu

6 жыл бұрын

Used it for 3 years (seasons). Any Epoxy suitable for boat building. Not the one that it is used on a car. There is no brand name on it in the Philippines where the boat was built.

this video was uploaded in 2015, now that we are in 2018, is the same boat still doing the job, did you make any upgrades? what about maintaining it? thanks in advance , great video

@gewibu

6 жыл бұрын

The boat was build in 2010 and I just sold it in January 2018. Still in good condition but it had spent the las few years in a garage. A Dive Center bought it and they put special rubber mat inside as an upgrade. You may have a look on the pictures in my blog: www.leben-auf-bohol.com/boot-verkauft.html It's in German however, you can still see the pics.

@abdelrahmanelbehiry6081

6 жыл бұрын

thank you so much sir, but may i ask, what does the rubber mat add to the boat? less stresses on the bottom? water proofing? i don't really get it

@gewibu

6 жыл бұрын

It protects the bottom and the walls from bumbs of the diving tanks and other hard equipment. And it looks good, very good. It also protects the bottom from water. Unfortunately, I can't add a pic here.

How is the punt holding up??? i would like to build one, with regards to the transom have u doubled it up? and did you screw in directly into the plywood? why did you not use a chine at the bottom?

@gewibu

3 жыл бұрын

Yes, I made the transom stronger because of the 8 HP motor. What is a chine? There is a keel however... For more infos please visit: boatbuilder.gewibu.com for more details and howto's about this boat.

@oswaldrebello6799

3 жыл бұрын

​@@gewibu Chine is like the railing that you have put on the top, it a similar type of lumber which i placed at the bottom between the bottom sheet and the side panels. Thanks for the reply though, are you facing any water leaks or has the ply deteriorated?

@gewibu

3 жыл бұрын

There is no need for the "chine" you mentioned. The fibermat and the epoxy is doing the job to keep the sides and the bottom together. Please read the details at the website I mentioned above. Also: There are NO screws or nails in this boat.

@oswaldrebello6799

3 жыл бұрын

@@gewibu thanks for the information. Highly appriciated.

Just wondering do you have to shape the sides so that the front of the boat is off the ground or does that just happen on it's own when you put the ribs in?

@gewibu

3 жыл бұрын

If you have a look in the plans, you can see that the lower edge of the side panels is not 100% straight. That's why the front lifts upwards a little. However, I gave the front a new shape anyway. For more details & link to the plans please have a look at the corresponding website: boatbuilder.gewibu.com

@lunarralphs8365

3 жыл бұрын

@@gewibu thank you this helps alot

@cdonatias6504

2 жыл бұрын

check this boat kzread.info/dash/bejne/eGdlsM2MerW2gco.html

i'm not sure how i got here but i sure am here

Great project put a centerboard slot for a sail boat and you will really have something.

@gewibu

7 жыл бұрын

Yes, that would have been my next project. Meanwhile, I turned a self made canoe into an outrigger boat with a sail on it and now it is a "paraw".

Nice job. Only one little question, did you added some bench on the boat. I guess so since i saw a few framing clips probably to hold them but we couldn't see on the video. Personally, and that is purely by reflex, not based on any expertise, but where the bottom meets the sides, i would have added a small 2 X 3/4 stick to beef up the joint.

@gewibu

8 жыл бұрын

+Martin Legare No need to. Epoxy and fiber inside & outside seems strong enough.

Part 2 would include now building a trailer to trolly it to the water 👌

@gewibu

3 жыл бұрын

Yes but I sold the boat to a local dive center so there is no need for a trailer

Nice

Nice!

And... Guys.. u need to put more fibreglass.. in case that boat have a scratch.. 2 or 3 layer is enough.. because they use a playwood.. nice job

@gewibu

5 жыл бұрын

No need for more fiber. The boat ist now 8 years old and still in service. The bottom however has a thicker plywood. Fiber is only along the edges while the whole boat is painted with epoxy.

@cdonatias6504

2 жыл бұрын

check this boat kzread.info/dash/bejne/eGdlsM2MerW2gco.html

Where do you buy fibreglass mat and resin in the philippines ? I've been trying to ,for about 5 years and cannot find any stockist at all. I live just outside Manila, ( Dasmarinas )

@gewibu

4 жыл бұрын

olympus.com.ph/content/13-offices You may also have a look here: boatbuilder.gewibu.com/filipinos.html

@gewibu

4 жыл бұрын

Here is antother one: www.polymerprod.com/contact-us/

I just wanna know for how long the boat can be used?

@gewibu

5 жыл бұрын

At least for a few years. Depends how you maintain it and how often you use it. The boat in the video was 7 years old when I sold it. It was still in good condition. But I have to admid that it was not always in the water.

Sir What about the benches shown in plan ? How can I do same benches ? The there is a difference between this bow which shown in the video and the one that shown the plan ??? Please help It a great job I want to make one for myself I am about some steps to done Please help

@gewibu

7 жыл бұрын

I made the benches by myself. That is not very difficult. I also changed the bow by myself by bringing the two sides together. It doesn't matter which kind of bow you prefer since the bow does not touch the water.

Me salvo en un proyecto de la facultad, mañana comento si me fue bien

hey, living in thialand- nice job, looks great ! 8 hp should give you what about 12-15 knots?

@gewibu

8 жыл бұрын

+Kevin Carter I have no idea about the speed. You may want to watch the 2 videos in my channel where I rode it and guess by yourself.

@isabelobocog2159

6 жыл бұрын

IM VERY INTERESTED,, IM GONNA TRY BUILDING ONE. ANY OTHER HURDLES, OR CONFUSING ON MEASUREMENT.WHAT CHANNEL WILL I BE ABLE TO VIEW THE SEA TRIALS

Nice idol boat

how does it handle when the sea is a rough?

@gewibu

8 жыл бұрын

Never tried and would never go out in rough seas with such a small boat

hi u change the bow. what changes make to plan for that

@gewibu

6 жыл бұрын

No plans for the change. I just pushed the sides together and cut them so that they fit to each other. There is no need for that change. You can build the boat straight after the plan. The bow looks a little different , however.

@den_lew

6 жыл бұрын

yes man thnx for fast answer i make same boat exactly but was a problem with A frame the b and c puted on boat well but A its largest now because of bow but i ll do same with u ill cut it to fit.1000000 TNX again!

Hi, Did you use fiberglass mat or fiberglass cloth ? And how many layers ? Thank you

@gewibu

6 жыл бұрын

I used both, just to try it out. The woven "cloth" is better in my opinion. Only 1 layer.

@FlySweden

6 жыл бұрын

livinginthailand thank you ! With polyester resin I guess ?

@gewibu

6 жыл бұрын

No. Marine epoxy! Please read here under "Material and their use" : bateau2.com/faq.php#top

How much for the motor and where you bought it in philippines?

@gewibu

7 жыл бұрын

It was a used motor from Germany and I sent it by BB Box. Partially disassembled. But you can buy them in any big city (Manila, Cebu, Davao). Just need to find the store. Google helps.

@Zonards2012

4 жыл бұрын

philippines making boats here! just click the link kzread.info/dash/bejne/nKaHutyOh5e_n9o.html

Quel est l'angle que vous avez choisis pour l'avant du bateau ? Merci

@gewibu

5 жыл бұрын

L'angle résulte du plan boatbuilder.gewibu.com/