How To Build A Bluetooth Racing Car Using Old RC Car(Using Arduino)-Smartphone Control Car(Sinhala)
Ғылым және технология
⚙Hello Friends,😀😀
💿Arduino Code and Diagram : robotlk.com/bluetooth-racing-...
📱Mobile App Link : play.google.com/store/apps/de...
In this video I will show you how to make a Bluetooth Racing car.It uses an Arduino Program to build it. For this I used an old racing car with lost transmitter.This is controlled by the mobile app. It can control the car's horn,front light and rear light. This Bluetooth car can be controlled with both Accelerometer and gesture. The speed controller can also be drifted when increased
**Parts List
1) Arduino NANO - s.click.aliexpress.com/e/_DFE...
or UNO - s.click.aliexpress.com/e/_DdM...
2) L298N Motor Drive - s.click.aliexpress.com/e/_Dcf...
3) HC-05 or HC-06 Bluetooth Module - s.click.aliexpress.com/e/_DDq...
4) 2x18650 Battery Holder - s.click.aliexpress.com/e/_DEB...
5) 2×18650 3.7v Batteries - s.click.aliexpress.com/e/_DCv...
6) Male and Female Jumper wire/TT Wire - s.click.aliexpress.com/e/_DCl...
7) Four LEDs (Front and Back Light) - s.click.aliexpress.com/e/_DBC...
8)5V Buzzer (Car horn) -
My facebook page - / robot-lk-101113971569889
#BluetoothCar
#ArduinoCar
#Sinhala
Пікірлер: 118
You are great sir 🔥👌👌💅💅🤗🤗
Hllo brother Excellent work❤️❤️
Mast ha bhai 😀
Thank you ❤
GOOD
What music did you used in this video? Link please 👍🏻👍🏻👍🏻 is without copyright? Awesome work !!! 😎👍🏻👍🏻 I already bought all the parts. I wanna replicate your work.. Well done.. Thanks for sharing 😎👍🏻👍🏻👍🏻
@RobotLk
2 жыл бұрын
I will download it from the audio library of youtube studio.
Thawa vedio onna
@RobotLk
2 жыл бұрын
Ok.mn dannam👍
I solved the problem, btw do u know why it can't move diagonally? If u're pressing left or right and simultaneously front or back, it only takes the front or back signal, so u have to move with inertia. U have to go front release the command, turn and then re-press front, so u have to alternate the 2 commands. Is it normal?? Just tell me if I'm not clear, I know that it's not the best explanation
Nise
Brother can u please make this same code with extra light button also i.e.(Forward-Backward,Left-Right, front light,back light,horn,extra light)
සුපිරි servo motor ekak ekka nomal motor ekak ekka vidio ekak hoya hoya hitiye
@RobotLk
Жыл бұрын
12v denna puluwan onama motor ekakata meka danna puluwan
Good work
@RobotLk
2 жыл бұрын
thanks 🙏
Hello , Can I use two 3.7v lithium ion mobile batteries in series instead of 18650 batteries ? Please reply 🙏
@RobotLk
8 ай бұрын
Mobile phone battery can be used.
Bro if we make 4wd car with servo and tt gear motor the code will be same
@RobotLk
4 ай бұрын
Yes
Bhai yrr mere ek dc motor ek hi direction m work kr reha h Plz help
When I connect the Arduino with pc my Bluetooth module doesn't blink and I am unable to upload the code also in Arduino nano
@BoddupallyGopinath
2 ай бұрын
Simply disconnect the Bluetooth module and upload the code
Everything works very well but It doesnt turn left or right while moving forward or back ( ı use 12v battery )
@RobotLk
Ай бұрын
If the vehicle has a normal dc motor for the steering wheels, it will work properly.
If we want to use 4 wheel drive crowler car what will be the code and how can we connect the 4 motors in motor driver.
@RobotLk
3 ай бұрын
This code and circuit diagram do not match it. I will upload a video to match your car
@shibinlal9677
3 ай бұрын
Ok...Thank you...
@shibinlal9677
3 ай бұрын
If the back side motor connection is given to front side motor in 4wD will itl work as 4wD??
I can't control it in front right direction
Bhai isme ek servo use kar sakte hai kya
@redeyesgaming4655
20 күн бұрын
Well, that's actually not needed in this as he used and old rc car, but if you are making your own then YES, You can use a servo for sterring,but you also need to build the sterring mechanism
how to do servo connections
@RobotLk
4 ай бұрын
No servo motor is used for this
Hello, I have a problem, connect everything as in your diagram and use the same code as your description. But when I want to drive the car with my cell phone, the car does not move any of its motors, but it sounds like it wants to move. Does anyone have an idea what causes this?
@RobotLk
9 ай бұрын
Do you use 18650 li ion batteries?
@TRADA_YT
9 ай бұрын
@@RobotLk Yes. But don´t worry, I finally fix it. For anyone else who has this kind of problem. DON'T USE A POWER BANK OR BATTERIES WITH A STEP UP OR STEP DOWN VOLTAGE DEVICE as the battery, Just use some normal 18650 batteries and its battery holder. And that should work!
is this possible sir when i use l293d motor driver plss help
@redeyesgaming4655
20 күн бұрын
Yes,you can but you may have some problem with space
Arduino uno dea ke kora banabo🙏🙏
@RobotLk
4 ай бұрын
Yes, arduino uno can for this
Hello bro, can u use Arduino UNO instead of Nano with the same pin layout? pls reply soon
@RobotLk
Жыл бұрын
arduino uno, mega,nano are all the same. The code does not change
@ProWiddan
Жыл бұрын
@@RobotLk Thanks
@ProWiddan
Жыл бұрын
@@RobotLk Also i am facing some difficulties. The motor is not fast enough to run the car...
@RobotLk
Жыл бұрын
Try connecting three 18650 li ion batteries
if you can please make this uding arduino bord and l293d motor shield driver
@RobotLk
2 жыл бұрын
There is not enough space to put the l293d shield.
@RobotLk
2 жыл бұрын
If possible I will make a code and a circuit diagram.
@sasantech
2 жыл бұрын
@@RobotLk ok
very goood
@RobotLk
2 жыл бұрын
1st comment ❤️
App not available in playstore
@RobotLk
3 ай бұрын
drive.google.com/file/d/19av_7nMOK3M8V3ip91Xtsa8PL9yyxsX0/view?usp=drivesdk
❤️❤️
@RobotLk
2 жыл бұрын
❤️❤️thanks👍
Is there is possible to make a variable speed of rc car
@RobotLk
6 ай бұрын
Yes.By changing the input voltage of the l298n motor drive, the speed can be increased or decreased
@technicaljatt3523
6 ай бұрын
@@RobotLk using mobile device
MEKATA ARDIUINO UNO BOARD EKAK USE KARANNA BARIDA
@RobotLk
2 жыл бұрын
Puluwan ,arduino ona board ekak puluwan .code wenas wenna
I have a problem with command delay I have a delay of 5s between 2 commands I don't know why If u can help me with that pls
@RobotLk
2 жыл бұрын
Some blutooth modules have this problem.Try the hc -06 blutooth module
@marouanesebti4103
2 жыл бұрын
@@RobotLk okay thank you so much
How to connect Arduino Uno instead of Arduino nano
@RobotLk
4 ай бұрын
Connect the wires to the arduino uno in the same way as you connect the wires to the arduino nano. Select the board to upload the code as arduino uno. The main code is not different
@usmanking7232
4 ай бұрын
Ohk
@usmanking7232
4 ай бұрын
I am not understanding your diagram 😕
@usmanking7232
4 ай бұрын
Can you please make a new diagram with Arduino Uno
@usmanking7232
4 ай бұрын
Without led and buzzer
How to buy this arduino car casing kit👀
@RobotLk
2 жыл бұрын
Daraz , duino.lk ,Robolabs facebook page You can buy it through this online shop.Also available at electronic parts shops
How to charge a battery of car
@RobotLk
Жыл бұрын
Need to charge separately kzread.info3IQcoyL0szQ?feature=share
Can i use Arduino mega 2560 ? :(
@RobotLk
Жыл бұрын
Yes
@timanime213
Жыл бұрын
How to activity. Can you give me diagram ? ❤
Aye ඔය ඉස්සරහ motor එකට servo motor ekak දැමමොත් ඔය code එක වැඩ කරයිද 🙏....
@RobotLk
Жыл бұрын
Na
👍
Thanks for the tutorial, but the car can't go straight.
@vedmaharjan
Жыл бұрын
also, would a 2 9v battery work
Left-right and forward,backward and left-right this all not working together plzz help❤❤
@RobotLk
5 ай бұрын
1.What batteries are used? 2.Does the bluetooth connect properly? 3. Motor driver - Is the ENA, ENB mini jumper installed in the motor drive?
@rajkaran378
5 ай бұрын
18650 3s
@rajkaran378
5 ай бұрын
Yes Bluetooth connectes -yes i checked the connection properly 2-3 times. .
@RobotLk
5 ай бұрын
If 3s is higher. Maybe the motor has been damaged. Give power separately and see if the motor works
@rajkaran378
5 ай бұрын
Bro motors work properly but not together
It doesn't move at all!! All the components and connections are right, the problem is the code. When I connect to the hc-05 and try to send a command, nothing moves, I can't even control the lights!
@RobotLk
2 ай бұрын
The code is not wrong. Are the Bluetooth module's RX and TX properly connected? Blutooth module Arduino TXD RX RXD TX
@AlaksYT
2 ай бұрын
@@RobotLk yes, everything is connected as u've shown in the video. I followed every step of the video and the diagram
@AlaksYT
2 ай бұрын
@@RobotLk I also checked every component alone, so I'm sure that everything works fine. I checked the bluetooth module too with the AT commands
@RobotLk
2 ай бұрын
What is the baud rate of the bluetooth module? I don't know if the baud rate of your bluetooth module is not 9600
@AlaksYT
2 ай бұрын
@@RobotLk I tried 9600 and even 38400 which I used to test the AT commands
Code eka danavada
@RobotLk
Жыл бұрын
Description eke athi.naththam email ekak danna
Has anyone made this ?
@RobotLk
16 күн бұрын
Yes
Code download no rar and zip
@RobotLk
2 жыл бұрын
drive.google.com/file/d/1-3eZhuwfNG0Gd-z7zHJlCvvyhYJJlqJH/view
@RobotLk
2 жыл бұрын
Zip file
Bor code successfully uploaded but it is not working 😢😢😢😢😢😢😢😢😭😭😭😭😭😭😭 please help me
@RobotLk
Жыл бұрын
Does the bluetooth connect properly?
@opcreativeabcxyz5863
Жыл бұрын
@@RobotLk yes it is connected with mobile, if I give any command there is no response I think there is problem in Arduino Nano
@amitjadhav3879
11 ай бұрын
@@opcreativeabcxyz5863 check the TX and RX cable with Bluetooth module and Arduino nano. TX to RX and RX to TX
@AlaksYT
2 ай бұрын
I have the same problem, did you solve it?