Thanks for calling out the rotation speeds. Super helpful

@Justbereelflorida

Жыл бұрын

It makes all the difference at the right speeds. The person I learned from is who told me those speeds and it’s always work well for me

This is the best video I have watched so far on how to polish my boat! Thanks

@Justbereelflorida

2 ай бұрын

Good luck! Have fun out on the water these season.

Man….thank you that is a great breakdown of how, to get the best result 👏🏻👏🏻👏🏻👏🏻👏🏻

@Justbereelflorida

Жыл бұрын

Hope it helps. Thanks for watching.

Great video. Simple, easy to understand. Thanks

@Justbereelflorida

11 ай бұрын

Hope it helps

Great video overall, easy to follow. Nice job.

@Justbereelflorida

Жыл бұрын

Thank you for the compliment.

Great explanation. Super useful.

Awesome video, thank you!

Great Job, well explained.

@Justbereelflorida

2 ай бұрын

Thanks

This should have over a million views

@Justbereelflorida

2 ай бұрын

I appreciate it. Hope it helps. I’m sure there are better ways of doing this. But it’s what works for me and keeps the boat looking good 👍🏼

Great video. I use a foam pad for polishing the scratches the wool pads leave behind and to add protection

@Justbereelflorida

Жыл бұрын

I’ll have to try it out.

@matthew0852

26 күн бұрын

You found the foam pads worked fine to polish and wax?

@Justbereelflorida

24 күн бұрын

@matthew0852 I haven’t used foam pads. So I’m not sure how they work

Great job! Meguiars products work so well

@Justbereelflorida

24 күн бұрын

I’ve been happy with them

Good video.

Great video.

@Justbereelflorida

Жыл бұрын

Glad you enjoyed it

Great video, just use the handle, that's what it foe, lol, great job, helped alot..

@Justbereelflorida

11 ай бұрын

Ive actually took off the handle. I have better control without it. Thanks for watching and commenting. Hope your boat shines new

Thanks very helpful

@Justbereelflorida

Жыл бұрын

Glad it helped

I’d try a foam finishing pad, takes out the scratches from buffing/polishing trails you leave from wool. That reflection will 100x

@Justbereelflorida

5 ай бұрын

I’ll have to give it a try

@rick23.23

5 ай бұрын

Promise you brotha 🤝 3ms purple foam pad is cheap and I get 2-3 boats per pad

Would be awesome if or when you do can do a video on detailing the hull. I have a jet ski and dang, .....

@Justbereelflorida

Жыл бұрын

Sure thing, great idea

Love this video! I've not waxed my boat yet. Still new (to us) does that wax hold up in salt water? Also, do you do the inside of the boat? Floor? Walls? Thanks.

@Justbereelflorida

Жыл бұрын

Once you return the shine, I wax all of the smooth fiberglass surfaces. The wax will hold up for 3-6 months ive heard. But you need to buy a boat soap that wont remove the wax layer. Don’t use dish soap, buy a good boat soap.

@johnathansawyer8736

Жыл бұрын

@@Justbereelflorida awesome. Thanks!

Great video. What are your recommendations when you’re going over decals?

@Justbereelflorida

8 ай бұрын

If your decals are not real metal then the compound will basically (sand them down). I just go over mine but a detail buddy of mine pulls them off of boats and doesn’t reapply them. Hope that helps

@ryanmartindell787

8 ай бұрын

@@Justbereelfloridavery helpful thanks man!

I'm new here I like your easy step by step video my wife showed me the video after purchasing the products that you are using. My question is can I buff the boat and polish later. I mean I want to oxidize my boat first and then continue to polish and wax later Tell me your thoughts

@Justbereelflorida

Жыл бұрын

Yes buff first then polish and then wax. I like to do 1 side at a time and go through all 3 steps. Before moving on. Just how I like to do it, to remember where I left off.

Great video, thanks for taking the time to make it. Can this process be used on raised surfaces like molded in non skid?

@Justbereelflorida

8 күн бұрын

I’ve seen where you can do non skid. But they use some type of brush head to help get product down in between the raise decking

@JimCarter-mq3vl

8 күн бұрын

Thanks for the reply, I'll look into that.

Great video, curious what speed you did the wax at and did you use a new pad or the same one as you polished with?

@Justbereelflorida

Жыл бұрын

Used a new pad for the wax stage. I wax around 2500/3k speed. Just above what the polish speed is

@Justbereelflorida

Жыл бұрын

I use the same 3m pads for polish and wax. I buy 2 and use 1 for polish step and 1 for wax. You could prob use a microfiber pad for wax stage if you wanted.

how did you attached the wool pad to the polisher?.. hook n loop ?

@Justbereelflorida

Жыл бұрын

I use the Velcro pads.

Thanks for showing this. What speed for the wax?

@Justbereelflorida

24 күн бұрын

I go same as polish maybe a tad faster

What level of oxidation requires wet sanding? Can you get any level of oxidation out with buffing?

@Justbereelflorida

Жыл бұрын

I’ve never had a boat oxidized enough for wet sanding. But I’m sure professional detailers encounter them often. I just do my own boat and never had to wet sand

Will the 7in foam polishing pads from harbor freight work just as well or you really suggest the 3m?

@Justbereelflorida

26 күн бұрын

I’ve never tried the foam so I’m not sure how well they work

Do you still do only shoulder width, start to finish when doing the whole boat. Or compound whole boat, then polish, then wax.

@Justbereelflorida

2 ай бұрын

You can do it either way. I normally compound one whole side, then polish then wax and then move to the other side and repeat. But my boat isn’t very large.

Should there be any waiting to wipe off any material applied? I feel like In other videos I have seen they usually wait

@Justbereelflorida

2 ай бұрын

I wait 5 min on the wax portion

Which pads did you use for the wax? Same as polish?

@Justbereelflorida

Жыл бұрын

Yes same pad. I have two. 1 for polish and 1 for wax

What product do you guys use on the interior?

@Justbereelflorida

11 ай бұрын

I use the same products on all smooth gel coat

If you use a quality sealant or better yet a ceramic coating, you’d never have an oxidation problem after the first compound and polish.

@Justbereelflorida

3 ай бұрын

I do need to try the ceramic coating

I'm not sure who told you that you cant clean and reuse the pads, because you absolutely can, I use Chemical Guys pad cleaner on mine, and they come out great

@Justbereelflorida

Жыл бұрын

I do clean and reuse them.

Do you use the same pad for waxing you do as polish? Or new pad?

@Justbereelflorida

4 ай бұрын

New separate pad

@jeevandoman357

4 ай бұрын

thank you man, will a 9 inch 3m yellow pad work on my 7 inch makita?@@Justbereelflorida

@Justbereelflorida

4 ай бұрын

It might. I’d have to see it in person, but I would think it should

How often do you polish and wax?

@Justbereelflorida

3 ай бұрын

I try once every 6 months, depending on how much use the boat is getting and how much I’m washing it

The best way to apply your product is with a sponge.

@Justbereelflorida

4 ай бұрын

I’ll have to try it

Funny how it says constant speed on the polisher box my harbor freight Chicago brand sucks and maintaining speed

@Justbereelflorida

Жыл бұрын

I’ve had good luck with mine. It’s not the best of the best but it does get the job done.

Can I have sun hit it after 15 minutes of finishing?

@Justbereelflorida

2 ай бұрын

After all the steps are done I move the umbrella to my next spot. It’s similar to don’t wax a car in direct heat of the sun. The bottle of the product should give you temperature recommendations for applying

Turn music off, what does it serve on instruction video

@Justbereelflorida

3 ай бұрын

Just a fan of the guys music he makes and I use it in my fishing videos. Sorry you didn’t enjoy it

You didn’t say what rpm wax speed should be😮!

@Justbereelflorida

8 ай бұрын

I didn’t even realize I didn’t say that. I normally do same as polish or a little faster speed.

Sorry dude...I have used this on my lightly oxidation gel coat, it didn't even make summer, and yes I used an orbital buffer..in my opinion there is alot better!!

@Justbereelflorida

Ай бұрын

What products would you say work better? I’ve always had luck with the McGuires.