Wow last time i made beer was 20 years ago , how times have changed .Much for the better. Used to not be allowed to still have any sanitizer anywhere near the beer , or fermenting process . may just invest in some kit and start again (the mrs raises her eyebrows ). So much easier .

Great video, my first venture using this method tomorrow 👍🏻

Shout out from down Under Australia. Great little video guys, much appreciated. 🤙🍻🇦🇺

Was just thinking the other day how few good videos there are on packaging (other than kegging- but even those are fairly basic). And it's the bit of the process that is most under appreciated. So thanks for helping to plug the gap!

@themaltmiller8438

6 ай бұрын

Glad you enjoyed it, Anthony! Hope you're well

Awesome video and so well presented!!!!

Good timing for me as I’m currently borrowing a Blichmann Beer gun and was looking at buying my own, with Blichmann out of stock, this is a good alternative.

Something else to add to the wish list 😂 great informative vlog as always gents 👍

@themaltmiller8438

6 ай бұрын

Glad you enjoyed it

Well that's me sold got a keg of larger that needs bottling and a plastic keg of belgian triple that needs to be bottled on payday going to order me one of these as well as the lines and fittings that are needed with it. Grate job on the vid guys 👍🏻👍🏻.

thanks a ton.

I filled up cans with the beer gun as well before moving on to a DuoFiller

I'm glad you got the crown capper to work! I've had to throw mine away because it just shattered the bottles.

@themaltmiller8438

6 ай бұрын

Sorry to hear that!

Great video, many thanks. I know you used 10PSI for sanitising the kit before use, but do you drop the pressure for bottling? Finally found a use for my defunct demijohn 😂 Could do with a video on forced carbonation. Specifically calculating CO2 setting to use if already pressure fermented?

A great video which clearly explains how to use what can be a tricky bit of kit when you first get it. Rob looks incredibly fresh. Did he shave especially for this video?

@themaltmiller8438

6 ай бұрын

He did, yes!! Baby faced!!

Very enlightening thankyou. Could you do a video on how to calibrate brewzilla temp sensor and the Bluetooth thermometer so they read the same. As far as I can see on the net nobody has done this. Be great if you could do that. Cheers

@themaltmiller8438

6 ай бұрын

Great suggestion! We will look into this

Great video as always guys. I use one of your drip trays when filling from my bottle gun to capture any over flow. Is there any beer and gas line that you supply that is more flexible that the lines you were using in the video?

@themaltmiller8438

6 ай бұрын

No, however the 3/16 line can handle both gas and beer and due to how thin it is means its more flexible but you do trade off against the flow rate

If this was in response to my request on a bottling video- if so many thanks it answered my questions I presume pressurising the fermzilla before bottling does away with any requirement to add any carbonation drops

@themaltmiller8438

6 ай бұрын

Yes it was!!! So it will depend, if you have added pressure for long enough to force carbonate the beer then yes it does do away with that requirement! Glad you enjoyed the video!

Very nice demonstration. Coasting this gun to itab (counter pressure ) what are advantages or disadvantages?

@themaltmiller8438

6 ай бұрын

The big benefit of counter pressure is the benefit of having the balanced pressure to keep fobbing in check even more efficiently

Great video. I know you don't sell it but I'd love to see a video on what sort of co2 cylinders are needed, he best to source etc. I'd also be really interested to understand what the cost implications of using co2 to carbonate and transfer are, i.e the actual cost per pint rather than the initial outlay for equipment

@AndrewBenham

5 ай бұрын

Ah just found one from a few years back 😂 kzread.info/dash/bejne/dWF_1tuhmdmfdrw.htmlsi=n8v_zRfWmcxsXgek

@themaltmiller8438

5 ай бұрын

Great suggestion!

Another great video! Thank you! I finally got the fermzilla the back end of last year, kegged 19L of a 23L brew and suddenly though "How am I going to get this in to bottles?" I ended up just going the old fashion auto siphon route, assuming that any oxygen introduced would be sorted by the bottle conditioning (second fermentation), is this not the case? I have since thought about using the NUKATAP Counter Pressure Bottle Filler that I already have to bottle from my taps, I assume with the right connections this could work as well as the gun you're demonstrating here right?

@themaltmiller8438

6 ай бұрын

Glad you enjoyed the video. It depends on the beer style really, if you're doing anything hoppy or very pale lager you might end up with dulled beer at the end. The counter pressure filler would indeed work well with this set up too, rather than the beer gun

I usually use an in line filter “beer bouncer “ brand which would be on fitted between fermzilla along the beer line and the beer gun, how would you purge that. Using sanitizer would stay longer in the filter holder. Would be better to purge with co2. Are there screw in connectors (instead of the screw in barbed connectors) so you can clip on a red connector gas line either side one to purge and then one to allow o2 out. Then just clip the beer line on using yellow connectors , if that makes sense ?

@themaltmiller8438

Ай бұрын

Hey! I think I get what you’re saying. The way to purge would be to flush with sanitiser first from a keg that’s already been purged with CO2 until the sanitizer is all gone and then you’re blowing the CO2 from the keg through the lines, and filter. Hope this helps!

Great video, are there any plans on stocking some of the alternatives to the iTap that I have seen popping up from other suppliers? Don’t know if any have made it to the uk yet…

@davec4955

6 ай бұрын

I got Boel itap before the Russian invasion, a great piece of kit !

@DudesBrews

6 ай бұрын

@@davec4955 agreed I love mine but I would like to have an option for an equivalent replacement as its going to be a problem if I need replacement parts anytime soon

@themaltmiller8438

6 ай бұрын

I'll let you know!!

@DHenr-bk6nz

Ай бұрын

I have both beergun and itap. I found beergun easier to use . It has a very simple design and is likely highly reliable. I love this beergun. A must have

I have the thermowell and the chilling coil. But I worry they leak a bit. Might be too many things going through the lid. Have you tried those at all?

@themaltmiller8438

2 ай бұрын

Not yet as we don't have them, but it's on our next delivery from Kegland. Can't wait to have a play with them together!

If you use this system to bottle un-carbonated beer,I assume that you would add some sugar to the bottle before adding the beer. Would you still flush with Co2 or skup that stage for the beer to naturally carbonate off the sugar?

@themaltmiller8438

6 ай бұрын

Yes you will need to add some sugar to allow for the secondary fermentation, you can still flush with the co2, just perhaps for not as long. I would still do this for beers that are heavily hopped to prevent the hops being oxidised

I noticed you're using version 1 of the Blichmann Beer gun. The version 2 doesn't have the grey connector for the beer line with it. Where did you get one from?

@themaltmiller8438

3 ай бұрын

It's not a Blichmann one, it's the kegland one - www.themaltmiller.co.uk/product/duotight-bottle-filler-beer-gun-kit/?v=79cba1185463

Is it possible to use this transfer kit with the GF Conical and the MM pressure transfer kit?

@themaltmiller8438

6 ай бұрын

Yes, but you would really want gravity to feed the beer gun as you might loose a lot of CO2 if you continually have the gas bottle feeding the top of the FV

You mentioned that you had the Fermzilla pressurized to 20 psi. I presume to carbonate the beer. How long would is needed? And then once bottled, it’s ready to drink?

@themaltmiller8438

6 ай бұрын

It will depend on the level of carbonation you require but loosely speaking 4-5 days at 20PSi will do you well. As soon as it's bottled yes you can drink, although we suggest leaving for a little so settle down...if you can wait 😉

If you are using oxygen scavenging caps, are they not already “activated” when soaked in sanitizer? Are you better using them straight out of the packet (sterile?)

@themaltmiller8438

2 ай бұрын

Hey! The sanitiser is what activates them, ideally you don't want to jostle the bottle after capping and as such exposing the beer inside to the air/oxygen in the bottle next.

Are you guys in a hard water area? You have cloudy sanitiser, have you checked the ph? I had this problem in London

@lindsaywilks3935

3 ай бұрын

I'm in a very soft water area and my stock solution of sanitiser always goes cloudy. Curiously it clears after storing in the dark???

I guess you'd add priming sugar to the fermzilla somehow or a carb drop in the bottle?

@themaltmiller8438

6 ай бұрын

If you are packing un-carbonated beer, yes

Just out of curiosity how do you add the priming sugar(Bulk Priming) and the bottling yeast without opening the fermenter?

@themaltmiller8438

6 ай бұрын

You would need to add to the bottles if you didn't want to open up the FV however if you have a pressurised FV then we would suggest carbonating the beer in the FV, either through natural carbonation under pressure or by adding your priming sugar to the FV and allowing the carbonation to take place in their.

@themaltmiller8438

6 ай бұрын

It’s possible with a unitank as they have detachable collection vessels that you can gas flush while affixed.other option is a hop drop system if you have a Fermzilla or or stainless unitank

Do you over carbonate the beer before bottling to allow for some CO2 loss during transfer or is normal level of carbonation ok?

@themaltmiller8438

6 ай бұрын

You should be fine to carbonate appropriately before bottling. Again, it takes a bit of trial and error to start with but after a few batches you’ll have it nailed down

Can you add carbonation drops to the bottles for extra fizzy beer

@themaltmiller8438

Ай бұрын

There’s a real risk of creating bottle bombs with this. Already carbonated beer having a further food source for the yeast added could result in over carbonation and adding too much pressure to the bottles

How much residual sanitiser can you leave in the bottle before you affect the taste of your bottled beer?

@themaltmiller8438

6 ай бұрын

Drips and surface residue are fine, anymore than that really you don't want. You can invert the bottles on a rack if you wish to drain more of the residual sanitiser out

Do you still have to condition the beer in the bottles or you can drink after cool it down?

@themaltmiller8438

Ай бұрын

If you're filling with carbonated product then no need to condition however we would still suggest leaving them to stand for 24-48 hours without jostling as the caps generally have the Oxygen scavenging seals and need a little time to remove any oxygen that might have been caught in the neck of the bottle before capping.

If you haven’t started dispensing eg kegging, it will be unlikely you’ll have a c02 bottle laying around.

@themaltmiller8438

6 ай бұрын

Yes that may be the case but folks might have a mini reg or use the residual pressure from the vessel. It might be they invest a little bit at a time to build up to the full dispense system and this is could be part of the journey 👍🏻

@MrMittens1974

6 ай бұрын

Would be a good time to invest in one then.

@davovich

6 ай бұрын

You may have a Sodastream type cylinder around. Not as cost effective but it works

I thought oxygen scrubbing bottle caps were meant to be kept dry before using them….

@themaltmiller8438

6 ай бұрын

They need to be wetted to activate so a quick dunk in sanitiser before calling is perfect

Looks like you are not sanitising the gas tube in the gun using this method. You probably need to lie in a bowl.

@themaltmiller8438

6 ай бұрын

You can do this, yes. however no liquid is coming into contact with the gas line