He did everything right, but i do not think he mentioned this. When using aluminum or copper for hard line you want to make sure it doesnt go straight to anything that vibrates. A buddy of mine took the soft line off his compressor and put a push connect straight to it, it looked awesome but the movement from the vibrations caused the line to crack, leaving him stranded. The best is to use stainless line but compression fittings are annoying to use unlike the PTC fittings. Also just in case anyone is wondering, you cannot use PTC fittings with stainless lines.

@princeislam9441

4 жыл бұрын

How do I get this air suspension for Toyota

Wow, what a difference! So cool, thanks for sharing Nick!

I absolutely loved this tutorial. Nice job fam. The car looks clean btw. 👍🏾

So glad you show how to do it. Everyone just shows it done and skips the how to part

Very nice attention to detail 👍 and congrats on finishing school I can’t wait till I’m done with my school

Awesome job! Very informative!

Great video , it’s hard to film and work so good for you man.

Thanks for sharing! Gave me the confidence to do my own hardlines. Sub'd👍

bro... clean af! good sh!t

look nice

This video helped a lot for my trunk setup and gave me some ideas. Sub'd

Clean

But to the install DUDE FCKIN SWEET!!!!

nice vid. piano hinge would look better imo. i like the pearl. nice job

I'm doing mine too, I need some advice and pointers please

Get yourself a contour gauge and use Ram Board (Home Depot)to make your templates.

This was fucking awesome! Helped me create an idea to do for my trunk!!!

hey can you tell me what fittings are used where and how hardlines are fitted into them

What kind of tubes I should use? and can you give me links on this tubes and fittings? Thank you!

How did you polish the lines. Did you have to do any sanding before using polish?

can put the exact name of the fittings you used in this setup? I went to the website you put in the description to look for them and they have a kit but does not look like the one you have.

These parts you used to connect, do not leak? I'm Brazilian and here the pieces to assemble a hardline are kind of extinct. Do you have a store that exports these components to tell me?

Pls how do I get the set of the air suspension, web site pls or link

Hello where do you get the fittings 3/8 ???

Got that HOOTIE AND BLOWFISH STYLE GOING ON.... unfortunately there’s ALREADY BEEN A HOOTIE AND BLOWFISH....

What are you using to wrap the mdf ?

These air fittings do they have center guides in them like plastic line fittings or no? Can you add a link to fittings similar please and thankyou🙏🏻

@NickSabella

Жыл бұрын

Yes they do! They’re dot fittings from bagriders.com

Did you buy different fittings? I’m looking to replace the push to connect fitting with something more “flashy” for a better look.

@NickSabella

5 жыл бұрын

I stuck with the push to connect fittings. Let me know if you find anything better because I am interested :)

How can I get the hard lines

What kind of wood is that

what type of glue you used?

Wht is this cylinder for???

Hey man, what fitting did you use? I can’t find what they are or where to get them, can you send links?

@NickSabella

6 жыл бұрын

Larry Gates I got all my fittings from bagriders.com I don't have links to the specific fittings but their website is easy to navigate

@Nick Sabella, I know the tank has the compressor line and then the management line going to it but where are the other 4 hard lines routed to?

@NickSabella

5 жыл бұрын

They're all capped off. They're just for looks or I guess future expansion.

@f3to702

5 жыл бұрын

@@NickSabella gotcha, makes sense.

don't add music

What tipe of fittings u used on the false floor?

@NickSabella

6 жыл бұрын

Gattyck2 Gatica bulkhead 3/8" ptc to 1/4" npt

How were you able to connect both ends of the hard lines into the push to connect fittings if it’s not flexible?

@NickSabella

4 жыл бұрын

The push to connect fittings have some flex

@wpeneyra

4 жыл бұрын

Nick Sabella thanks

What size is that air tank?

@NickSabella

Жыл бұрын

5 gallon

Where did u get the hardline from? Is it 1/4”?

@NickSabella

5 жыл бұрын

The hard line is from bagriders.com and is 3/8" aluminum

Where can i find the tube?

@NickSabella

6 жыл бұрын

bagriders.com

Newbe question here but what are the 4 pipes on the front of the tank going to? I assume the ends are going to dual pumps and one of the front is the supply to the management but what about the three additional lines?

@NickSabella

2 жыл бұрын

They’re just for looks. They’re capped off under the floor

@jasonhalvorsen1248

2 жыл бұрын

@@NickSabella thanks, great looking setup

Hi what are the fittings called that go from tank and hard lines into floor to soft lines??? Thanks

@NickSabella

3 жыл бұрын

Bulk head fittings

@jamesbest9741

3 жыл бұрын

Thank you my man

Where did you purchase the bender?

@NickSabella

5 жыл бұрын

Its in the description

Whats the compressor for sorry for the dumb question....

@NickSabella

5 жыл бұрын

Viair 444c

What color did you use to paint your tank??

@NickSabella

5 жыл бұрын

Candy Teal powdercoat

@KyleHidalgo

5 жыл бұрын

@@NickSabella hell yeah I'm going to have to get mine powder coated when I get it!

what's the size of the push connect fitting thats on the tank ?

@NickSabella

4 жыл бұрын

The ptc sides are all 3/8 except the drain. I cant remember the thread sizes

@adriancamarillo5475

4 жыл бұрын

Nick Sabella okay thank you!!

I'm running 2 viair compressor 3p/38 airlift performance management. But I'm using airmaxx airtank so, basically I don't know what I'm doing what's the 4 port from the front going, and 2 hole's in one end.🤦‍♂️ The Details on the tank ports. 9 Ports: 4 - 1/2"NPT Ports (all on the front) 2 - 3/8"NPT Ports (1 on each end) 3 - 1/4"NPT Ports (2 on same end & 1 for drain on bottom)

@NickSabella

5 жыл бұрын

That's the same tank I have. Just do what I did and cap off the extra ports

@eleazarglynnapao5351

5 жыл бұрын

@@NickSabella could you please make me a diagram on where did you run those hard lines? I know some of the hole's go too but the 4 holes in the front no idea where to go,😅 egpolintan@gmail.com

Hey bro. Nice setup. I watched the whole project and came out pretty good. But I got a question. With the hardlines and the push connect fittings. It don't leak. I'm doing a hardline to my project to but not sure if they leaked because the hardlines done lock with the push connect fittings. Message me back bro. Thanks.

@NickSabella

6 жыл бұрын

Junior Villarreal I had some fittings that didn't lock and leaked really bad. I had to replace them. The setup now leaks a little but it takes a few days to fully leak out so it's not a problem unless you don't drive it for a few days.

@MrNathaniel216

6 жыл бұрын

Nick Sabella cool thanks bro

@taylorh9291

6 жыл бұрын

I had the same setup and didnt have any leaks from the hardlines. Just like with cutting soft lines, you have to make sure your end cuts are extremely clean and then pushed all the way in. Should be fine when using the right tools and materials.

All this nice work and you use interior door hinges and a kitchen cabinet handle ? C’mon bro there’s all kinds of hidden European cabinet hinges you could have used. Also could have recessed a finger pull for a cleaner look

Background music is annoying when your talking

Your trunk is full of rust, and you have air suspension😂😂😂