How to Attach Magnet Snaps on Fabric
This is demonstration on how I attach magnets onto the lining of a bag. I must mention that there are "sew-on" snaps which look very much like a button. I have never used them (I prefer the look of the traditional ones), but I imagine they are convenient in the sense that they can be removed without exposing damage to the fabric.
You can find me on:
/ marcelaspurse
/ marcelaspurse
Пікірлер: 69
Thank you for this tutorial. The firm interfacing is a very, very good idea for Cotton fabric to give it more stability & longevity. The clasp takes a real beating in a bag or a purse so fraying is a really big concern. I appreciate the time you took to help newbies (like me) out.
@MarcelasPurse
6 жыл бұрын
Essem Sween thank you very much for your comment. I am glad this is useful 😊😊😊
Thank you very much for your time to show how to apply a magnetic closure on a lining. Your Tutorial was very easy to understand and the best one I've found. Thank you again! 😊
Thanks for this video. Just saved me a lot of frustration. Needed a quick, easy solution to close a homemade duvet cover. The magnetic snaps are the perfect solution. Appreciate the tip about the interfacing on the cotton fabric.
@MarcelasPurse
Жыл бұрын
You are welcome 😊
Simple, easy and very good tutorial. Thank you.
@MarcelasPurse
Жыл бұрын
You are welcome 😊
Thank you! This is a great tutorial. I had been wondering how far to bring the snap down so I could still stitch and this gives me a good measurement.
@MarcelasPurse
Жыл бұрын
You are welcome 😊
A very helpful tutorial, thanks so much!
@MarcelasPurse
5 жыл бұрын
Glad it is useful. Thank you for your comment.
Very Good demo of fixing magnetic button to fabric. Thanks.
@MarcelasPurse
2 жыл бұрын
Thank you. 😀😀😀
Thank you that was very well presented an easy-to-understand greatly appreciated
This was a very helpful video! Thank you!
@MarcelasPurse
6 жыл бұрын
Megan Nelson 😊 you are welcome 😊
This is a great tutorial, I've used it many times. thank you.
@MarcelasPurse
9 ай бұрын
😊😊😊😊
Thank you very much I enjoyed your tutorial
@MarcelasPurse
4 жыл бұрын
I am happy to know . 😊😊😊
Thank you so much! Very well explained!
@MarcelasPurse
2 жыл бұрын
You are welcome 😊
Fabulous, thank you!!
Thank you so much really helped💗
@MarcelasPurse
5 жыл бұрын
You are welcome, I am glad it helped.
Can I stick the clasps instead of sewing it?
Thanks so much for this useful video🤗
@MarcelasPurse
3 жыл бұрын
You are welcome 😊
Great video
Thank you! This was very helpful. :)
Very helpful thank you for sharing!
@MarcelasPurse
Жыл бұрын
You are welcome 😊
Great tutorial, thank you
@MarcelasPurse
2 жыл бұрын
You are welcome 😊
Very helpful!!!
Thanks for the video!!!
Very helpful thank you very much !!
@MarcelasPurse
3 жыл бұрын
You are welcome 😊
very helpful! thank you so much
@MarcelasPurse
2 жыл бұрын
You are welcome 😊
Thank you so much!
Very nice.thank u.i don't know why one dislike?
@MarcelasPurse
5 жыл бұрын
Thank you very much for your comment. 😊
Thank you!
Thank you so much!!!!!
Thanks ma'am! Do you have any suggestions on how we could cover the back of the buttons? I'm a newbie here and I just need to attach a button to a small cape I'm making for one of my cousin's plushies. I'm afraid he'll get hurt with the metal parts in the back if I don't cover them up but I don't want to risk making the cape look bad! Thanks for any advice, your video was very helpful.
@MarcelasPurse
4 жыл бұрын
You could attach a piece of matching fabric as a circle a little big bigger than the metal parts exposed, fold the raw edges towards the inside and hand stitch covering the metal. Perhaps use a devorative detail on it. I hope this helps.
@undyla-chan1675
4 жыл бұрын
@@MarcelasPurse Oh thank you so much!
this is really helpful! I just had a question so the magnets are added to the interior part of the fabric correct
@MarcelasPurse
Жыл бұрын
The legs of the magnet pass from the right side of the lining fabric to be secured at the wrong side, so you have the round part on the right side of the lining fabric. Does it make sense ? 😃
Thank you
VERY HELPFUL! use the disk to mark where prongs go for cuts.
@MarcelasPurse
3 жыл бұрын
Yes, thank you. This I how I first learnt to do it, I must update this video 🤔
How to use the interfacing fabrics
@MarcelasPurse
4 күн бұрын
@@zahrabeawarwala6842 I have this video explaining: kzread.info/dash/bejne/Y4yb28mje5m5ZcY.htmlsi=N_LwIn4XYn2Mavp4
Hi, if the magent gets removed from the top side of the bag, how can I attach it again..
@MarcelasPurse
18 күн бұрын
@@niharika.77 Hello, I would unstitch the lining on the side or bottom of the bag in order to reach the location where the magnet came off from putting my hand through between the lining and main fabric. I would then reinforce that area of the lining with a piece of interfacing or fabric stitched to the back of the lining and put the magnet through as if nothing had happened, unless the fabric has ripped or the initial holes are too big. I hope this suggestion helps.
@niharika.77
15 күн бұрын
@@MarcelasPurse thank you!! 😊
Can I sew a button on the back of the clasp so you don't see it? I've already made my bag. Thank you
@MarcelasPurse
6 жыл бұрын
. Thank you for your interest Nancy, I am not sure what you mean, though. Are you talking about hiding the magnetic snaps or have you come to this video from another one of my tutorials and you are reffering to the pink bag where I am attaching the the snaps? Please let me know, I am always happy to answer questions and help in everyway I can. 😊
@nancydegeorge475
6 жыл бұрын
Yes to hide the magnetic clasp. Thank you for replying. I was a dumb dumb and finished the bag and then thought, 'how will I have some closure' 😂😂
@MarcelasPurse
6 жыл бұрын
:)) Nancy, we all make mistakes like that. But "closure" is important, so, I am guessing that your bag has a lining, if so, you could undo the stitching ( I am also assuming that you closed the lining at the bottom) and put your hand through all the way up under the lining to attach the snaps where you want them to be. Or, you could make a tab with a button hole in it that you could attach at the top of the opening of the bag between the lining and the main fabric (yes, you will have to undo the top stitching for that), then sew a button to the lining if you don't want the button be seen or a pretty button outside at the front. Another option could be to attach the tab on the outside of the bag (at the back) as if it were a flap with pretty stitching and make it go over the opening to the front where you would have a pretty button or magnet (you could even add a tassel to the tab). The other thing you could do is to attach the magnets in a different way with a little tab as I did on my "bucket bag " tutorial, where you will see what I mean by "tab", I hope this is helpful I cannot attach pictures here: kzread.info/dash/bejne/iKd9ptyOe7rYY6Q.html I wouldn't try to cover the magnetic snaps in any way, because you will be blocking the "magnetism". I hope this is useful,I cannot attach pictures here, so, let me know how it goes. :) .
🤩💖
You should fold the legs out not in.
4:20 WRONG, mom -not inside, but outside
First time on your channel. You have too much dialogue for viewers to read. Please just tell people what you want us to know to avoid all of the reading.
Thank you!
Thank you
@MarcelasPurse
2 ай бұрын
You are welcome 😊