How to Attach a Hole Saw to a Drill
Тәжірибелік нұсқаулар және стиль
How to Attach a Hole Saw to a Drill
Milwaukee Hole Saw Kit: amzn.to/2J4laea
Dewalt Hole Saw Kit: amzn.to/2Xma5ZI
In this video, I show you how to attach a hole saw to a drill using both a drill mandrel and drill arbor. I also show you for different types of hole saw configurations and three different connection types for installing the hole saw on a drill or impact driver.
Before you get started with your project, make sure that you know how to get your tools setup, so that you are ready for success.
Are You Planning A Bathroom Renovation?
When you’re ready to start your bathroom renovation project, check out Bathroom Renovation Survival Guide, my program that teaches you how to work toward preparing yourself, your property, and your project gameplan for your Bathroom Renovation. Check it out here: www.renos4prosandjoes.com/bat...
#howtoattachaholesawtoadrill #howtouseaholesaw
PINTEREST:
/ renos4prosandjoes
Пікірлер: 327
Thank for helping a 60 plus lady. At Lowe's watching your video. Learning to help myself.
You deserve a beer, saved a visit to either my mental health doctor or jail, i was only familiar with the wood type, but the Milwaukee was driving me nuts going loose with the wrong arbor. Cheers and thanks
I was going crazy trying to figure out how to put that thing on a drill and make a hole and thank goodness I found you. I don't work around or with tools so this was great.
Who knew there were different kinds?!! I had to wait until the last example to find out how mine works, but this "hole" presentation was very smart, interesting, easy to follow, informative, and demonstrated beautifully! Thanks!
after several videos, your was the first that actually gave me the info I needed - thanks!
@Lisa-jh1os
3 жыл бұрын
Samee thank you for the great vid
@pianomusic4you
2 жыл бұрын
Same here.
@bschuber
2 жыл бұрын
Same haha - I was too embarrassed to ask "but how do you actually put the bit on before using it" when looking at holesaw instructional videos 🙈
After spending nearly two hours getting confused about what I needed to use a holesaw on my power drill by looking on DIY store websites, this video answered all my questions. Thank you!!
You are a lifesaver!!! No instructions in our menards set and your video made it all make sense.
Thank you so much for the video. I recently purchased the hole saw and had no idea how to use or assemble to use with my drill. I'm not one to shy away from using power tools. Now let me find some wood and drill a hole. Thanks again.
Ok, after watching for 2 minutes and reading first 10 comments, while waiting for a hole saw to arrive, I'm subscribing. People making instructional videos like you've done are far and few between. So glad I found you. Now I need to find instructions for drilling marble and keeping the hole saw cleaned out.
Thank you, thank you! Your informative video with multiple examples is the best! Straightforward, easy to understand, love it! You have a new subscriber.
Thank you so much for your help with this video!! As someone who sifts through countless videos on KZread for help with various DIY projects, it is SO nice to find a video with someone who is a natural at teaching and articulating information!!
@RENOS4PROSJOES
3 жыл бұрын
Thank you for your kind words!
THANK YOU!! I just bought these and had no idea how to attach. Retiring and am teaching myself how to build things. Never too old to learn more!
If only allllll the KZread videos about Renos & DIYs were this helpful!! Thank you for speaking clearly, showing exactly what you are doing and being thorough.. Super helpful!
Thanks from Edinburgh Scotland - just about to cut a worktop need to start the corner holes with one of these 😎
THANK YOU SO MUCH FOR THIS VIDEO!!!!! I had not used one before and I bought the second kind but I had no idea how to attach it, ha ha ha, live and learn. I'm converting a cargo van into a campervan and I needed this tool for a couple of things in the van and finding your video was a welcomed relief. 🤗🤗🤗🤗
Thank you... Great video..., clear, short and to the point... Hope you make more videos for us 'joes'👏👏😊
This video was right on time for a DIY novice. Thanks brother.
Here’s a tip for getting stuck hole saws off the mandrel. Get a socket adapter that fits your impact driver and on the other end of the adapter, place the socket that fits the shaft of the mandrel. Hold the hole saw tightly with a glove. Place your impact driver in reverse. With your other hand, give a few quick squeezes of the trigger of the impact driver. Usually this will release the stuck hole saw
Outstanding video! I bought the last one you demonstrated and couldn’t figure out how to put the drill and the 6” hole saw together. Your presentation was well done and easy to understand. Thank you very much for taking the mystery out of this.
Without my arbor hole saw's user guide, I couldn't figure out how to replace the hole saw bit. I appreciate your invaluable guidance on this subject.
Great video, I needed this! (as a complete novice, all the videos I watched instructed how to use the tool, but not actually assemble it😅) Thanks for making such quality beginner-friendly videos, I'm subscribing :D
Clever people who make things sound simple are the best. Thanks :)
Thanks!! Now I know mine is stuck just like yours. So I confirmed its not my problem, just a design imperfection. Thanks again
Concise and clear. Thank you so much.
Thanks for the detailed and very informative video. This is gonna be of immense help with my DIY little renos at home.
Thank you! This is exactly what I needed to see to fit my kit to my drill.
@RENOS4PROSJOES
4 жыл бұрын
Awesome!
Thank you!! I could not figure this out for the life of me!!! Super helpful and explained everything
Very good breakdown. You took the time to explain all the elements in a relatively concise manner. Was looking to by a hole saw bit, then was instructed that I would need an Arbour. This was my research. You made a subscriber out of me, all the way from the UK. Keep it up.
@dorothylyons3239
2 жыл бұрын
❤
Thank you Reno now I have retired as an hobby I have took up basic woodwork making such items as bird boxes.you have explained in a very easy way to follow thank you👌
Finally got the info needed. I needed to know how to use the second mandrel. Realized I couldn't use my impact instead of the drill and that's why it wasn't fitting.
Thank you very much! Learning the names of these parts alone (eg mandril and arbor) is a big help to me
Thanks to you, I now know how to work the arbor for the large hole saw. Thank you!!!
Thanks! You addressed and resolved my dilemma in the first 2 minutes.
finally! someone who actually breaks it all down and shows how to use and install it and diff. types too! thank you! thx esp showing the details like the tiny side hole for an allen key and the oblong shape one -- once i separated it, i couldn't seem to figure out how to get it back on tight cuz i didn't realize the shape thing on both pieces on this one.
Thank you so much! So glad I found your channel!
Thank you sir this video came in handy today 2023👍👍
Thanks! I've got various holesaws and associated accessories but was never quite sure how to use them, you've explained it all very clearly.
Excellent, first person to explain clearly and properly how this is done. I thank you.
Thank you so much for sharing the info. At 7:51 you had the answer to my Milwaukee Dozer question. Milwaukee didn't think it was necessary to include instructions with their 15 piece kit.
THANK YOU!!! You helped me so much. I was just about in tears trying to figure out how to connect my new hole saw. Just subscribed too, looking forward to watching more of your videos
Thank You for explaining this Tool!!!
On the first one I found out I needed to use a deepwell 22m to put down in the mandril alternatively you could put a small steel punch through the whole mandril. Thanks for helping me get started with this stuff very good video, you remind me of Denzel Washington :)
Clear & correct! Saved my day. Best video ever.
THANK YOU! I was struggling trying to figure out how the mandrel connected to my hike cutter, thanks to you I figured it out!
@RENOS4PROSJOES
4 жыл бұрын
Awesome! Glad to help.
Great info. Sometimes basic information is the most valuable. Thank you, you got a new subscriber.
To release the hole saw from the mandrel when it seems stuck, I chuck the quick connect end in my vise and use a wrench to loosen nut, quick and easy. Good video
- E X C E L L E N T presentation. Info was concise, clear & thorough. BRAVO ! ! ! You get A+++++. Thanx 4 sharing.
Really clear explanation. Thanks so much.
Its been years since using mine last. Thanks for reminding me about the Allen wrench to tighten the nut down. Thanks again!
4 minutes into the video and I became a subscriber. Thank you
Thanks this was very helpful . Went to home Depot and i was lost lol ! Great Video and Thanks again.
Thank you very much, very informative. Saved me having to buy a whole new set of hole saws just because I thought I was missing an installation plate, whilst in fact I don't need it. Cheers again.
Thank you! The way you laid out each type of setup and how to attach was perfect.
Thanks so much for the thorough and great demonstration/explanation.
Man - thank you very much - I'm gonna subscribe to you just due to this video alone - thank you again good sir!
Valuable information! I love how you addressed all the different styles of hole saws and drill/driver setup!!! Thank you so much!
Yes very excellent instructions. Thank you My friend
Thanks, man! Perfect descriptions. You’re literally saving lives, or at least fingers and hands. ✌🏻
Very helpful, thank you very much. Subscribed. This will help get me going with sawing a hole (8.5") for a range hood (duct) installation.
Thx man now I can use the hole cutter
Thank you so much. I know that it is March 2022, but your demonstration was awesome. I bought a "flipped house" which required many repairs. Love the fact that you used correct terms as mandrel. God bless you for taking the time to help "DIY's.
Very detailed and clearly explained- Excellent tutorial Bro! Subscribed and look forward to utilizing more of your content.
A+++ . This was well thought out -- very clear for beginners with the shots you set up, and angles you showed, and the examples you gave. Bless you!
Very informative, just what I was looking for. Thank you ❤
Great, clear information!! Thank you!!
I needed the demonstration of the larger 6 inch one so thank you!
This is EXACTLY what I needed - thanks!!
I’m so grateful to have found your video. Was close to returning the hole saw I’d just purchased but your video was exactly what I needed to hear (and see cause I’m super visual) what got me to feeling safe and confident in my connection was when you reiterated there’s no part that goes on the inside -and the Allen wrench. I did the thing-I felt safe -and I made my moms awesome old oak desk accessible to the outlet so its now my new work space AND I feel like a bad ass.
Hey friend. RE: separate stuck hole saw: try clamp the end in a vise and use a strap wrench on the hole saw...maybe!
This was a super helpful video for me for my small DIY project. Thank you!
Thanks very much - the last one was exactly what I was hoping you’d show. Good job 👍🏻
Great job. Thanks again. Swiftly to the point and clear. See you in another year or so.
Thanks. I got one of these bits and saws as part of a kit for a rain barrel kit. Never used it before, and I didn't know it was more than one part. You were clear, and I figured it out in seconds.
Thank you for such great explanations. I want to drill a hole in the back of an armoire to pass cords through. I want to do it in the least complicated way and your video explained it perfectly.
Stick a rod through the slots on the side of the hole saw and use an adjustable wrench in the mandrel. Alternatively you can use an oil filter strap wrench( not the chain type) to grip the hole saw while you use the wrench on the mandrel.
@ferryelperro24
2 жыл бұрын
I was going to say the same!
What a good sort! From an ol gal down under. Thank you!
I appreciate this video. I need to drill a couple holes and this taught me about a mandrel!
You do a very thorough explanation I wish everybody on KZread could take some advice from your presentation. Thanks you answered my question thoroughly.
Great instructions for attaching this bit! Just bought a Ryobi kit and wondered what the heck I was supposed to do!!!
Found this video after having a cheapo hole saw drill bit that was "fused" , and looking for tips to fix it. I just got it fixed by running it under very hot tap-water for a minute (tills its almost too hot to touch) and then a minute of cold tap-water. After doing this twice, the drill bit went from completely fused to fairly easy to unscrew. I unscrewed it by keeping the end of the drill-bit steady with an adjustable wrench, and inserting a screwdriver in one of the holes of the hole-saw (use the biggest one you can get in there, as it's surprisingly easy to break thin screwdrivers with the amount of torque needed for a stuck drill bit). If the drill-bit is extremely "fused", you could probably put it in a boiling pot for 10 minutes, then drop it in a bowl of ice-water for a minute, see if it is looser, and if not, repeat. Big, sudden temperature changes can obviously break brittle, thin materials, but a hole-saw drill bit is probably not in any danger. So, there's hope for cheapo "permanently fused" drill bits. PS: do not use an electrical drill on low power-setting as the counter-torque! It stresses the motor, and even if "you're being careful", it's way too easy to accidentally hurt yourself. Use non-powered hand-tools (a wrench and a screwdriver). It's probably obvious for professional people, but I am leaving it here just in case, because it was a fleeting thought I had as I was trying to come up with a solution. And if I thought of it, chances are that someone else might too (thinking that the electrical drill is way more capable at creating the "needed" torque than what your hands could). You really don't need that much torque; all that is needed is sub-milimeter changes in the grooves of the drill-bit, and a few sudden temperature changes will fix that. Another tip I saw, from another youtube-video, if you have the more expensive hole-saw drill bit with pins, is to go over the sides of the drill-bit a few times with a hammer (at an angle), as that also creates enough stress for the fused scoring to loosen up a bit. This does not work with the cheapo-version, which was what lead me to try using hot and cold water (after breaking a thin screwdriver). Cheers!
Thank you. My hole saw was manufactured in China and came with instructions written only in Chinese!
excellent video. Easy to understand for a novice. Much appreciated!!
thank you. i just bought a kit and didnt know to use it. now i know
Thanks for this. I have the second type which came with a dewalt drill set. Couldnt work out how the saw attached to the drill bit...didnt have a clue about the bit that screws off the mandril until I saw this!!
Thanks so much Mate from the UK!😁
@RENOS4PROSJOES
4 жыл бұрын
You are welcome. And thank you for sharing where you are in the world. Cheers!
@Gigilamer
4 жыл бұрын
Yes, I would never have worked out how to use the attachments on my drill without you. I was sitting and staring at it for ages! It’s great to be able to ask a friend on KZread.
I need to know the last one but now i have the knowledge for them all thanks bro
Thank you! I've used hole saws before but couldn't for the life of me remember how to put one together. You answered my question plus gave some great advice about hand tightening.
Thanks for the video! Very clear, and easily understood.
Excellent instructional!
Thank you!! This helped me so much! I was setting up my hydroponic garden and just needed to drill a couple of holes. You explanation was soooo simple for me. I just spend over an hour looking for a screw for that hole to tighten it when you said to tighten it with an allen wrench it was a light bulb going off for me.
@RENOS4PROSJOES
4 жыл бұрын
So glad you found this video helpful! Thank you for sharing your experience.
You saved me so much time, thanks.
You’re right, I was trying to figure out what piece goes in the inside 😂
Thnk you man i have been trying to figure this out forever
Thank you. Great video. I got everything I needed. You are a great teacher!!!
Thanks for explaining it so clearly.
Great info. TYFS. 💘💘💘
Precisely what I needed! Thank you! Liked and subscribed!
Thank you! Love straight to the instructions without all the flash and loud music of other channels. Clear visuals. Sooo helpful❤️🙏🏼
Thanks! I'm new to all of this and I appreciated your clear descriptions. :)
Outstanding explanations and demos...Thanks!!!