Would be nice to have the same video with the majority of it on the screen, rather then off somewhere

@spidiq8

2 жыл бұрын

It sure would, if you read other comments i've addressed this more than the queen has made speeches, if I ever find the remnants of the kit or pick up another i'll re film it. :)

Thanks mate, this was a great help. Even 10 years later these companies are no better at instructions

Thanks this was very helpful, especially the information about the orientation of the slots, this saved my a lot of problems.

I never knew they sell it in rolls. 11 years later I got some and found your video. Thx bud!

Cheers Big guy. This really helped (11 years after you made this)

Very well done video, watching this in 2022, and it helped quite a bit!

@spidiq8

Жыл бұрын

Thanks. Glad it was useful.

Well done! Yes, your hands rise out of camera view occasionally but anyone watching should have mire than enough idea how to assemble the clamp! Thank you !! 😊

@spidiq8

2 жыл бұрын

Thank you! I would like to re film it if I can either find the remnants of the kit or a new one.

10 years later and this is still helping people. Thank you.

11 years later and thank you SO much for this.

Thank you. I bought 8mm wide clamp kit from the jungle store that had no instructions or pictures. This helped me tremendously. Cheers!

Your spoken description was so good, nobody should need any more visuals than are already there. As you so wisely mention, there's more than one way to assemble this kit and a wrong way could be dangerous if there's hot or flammable fluid passing through a hose. Many thanks!

@spidiq8

2 жыл бұрын

Thank you, hope it was useful to you.

Not that many videos actually showing these steps so thanks

Thanks for the video. Just bought one of these packs, no instructions included, and was puzzling how to put a clamp together. Video explaind it all nicely. Cheers.

Thank you so much! Tremendously helpful!

Thank you....I bought exactly the same kit and thought mmmm no instructions. Saved me time and potentially some money.

@spidiq8

9 жыл бұрын

Andrew Whetton Glad it was useful.

@uktony1525

8 жыл бұрын

I also bought the kit and made a real dogs dinner of it. Thanks for this explanation. Best wishes.

@spidiq8

8 жыл бұрын

UK Tony No problem, glad it helped

Exhaust sorted fella. Thank you for the simplicity of instruction

Thank you save me messing around working out the correct way.

Thanks for this video. I've just received a set that came in a plain white box with no instructions. This has been very helpful.

Thank you. I looked forever.

Perfect! Exactly what we are trying to do. I have used these all my life but never looked how they were put together. You need to keep your hands in the video though.

@spidiq8

Жыл бұрын

Yes, this has been raised a few times 😂 apologies, I have said if I ever find the packet with the remaining pieces in I'll redo the video as it's seemingly a popular one.

Many thanks. That was usefull, spent ages trying to figure out the crrect way to put them together correctly. Why on earth the manufactures dont put instructions on the packet I dont know. It would not cost them anymore as they have already printed on the packet with their logo's etc.!!!

Thank you very much for your very clear instructions - off to do some for my tumble dryer hose now!

@spidiq8

7 жыл бұрын

Glad it helped

@americafirst2785

2 жыл бұрын

Why the whispering?I can barely hear.

Thank you for your instructions! I really didn't know how to set it up but I do now. Shame you weren't always in camera view.

@spidiq8

9 ай бұрын

Apologies for that. At the time I couldn't view what I was filming and didn't know until after. If I ever find the packet I'll redo this.

Can't see what you are doing when you raise your hands above the level of the camera

Very informative, it helped me a lot. Perhaps your next video could focus on the item rather than your table.

@spidiq8

8 жыл бұрын

Yes, my focus was a bit out on this one, apologies but hopefully there was enough to figure out what was going on there.

@ellieprice3396

3 жыл бұрын

@@spidiq8 Do it over, we'll appreciate seeing what you're doing off camera.

Great instructions on back of hand stuff.

@spidiq8

2 жыл бұрын

Glad it was helpful! Now you can say you know them like the back of your hand.......well..... back of my hand. :)

Great video... saved me tons of time. I know it's not rocket science but, 2 babies and no sleep everything takes 20x longer lol

@spidiq8

2 жыл бұрын

Glad it helped.

Thank you! You got a new subscriber 🙂

@spidiq8

2 жыл бұрын

Thank you. Glad it was helpful

@edialbert8035

2 жыл бұрын

@@spidiq8 , I couldn't find any instructions at all. I live in Sweden and we have a similar set, at a store called "Jula", odd that there is no instructions anywhere, however I probably would have figured it out eventually, but your video saved me a lot of time, once again, thank you.

@spidiq8

2 жыл бұрын

@@edialbert8035 You're very welcome. The main reason I upload is to try and help people so everyone like yourself who tells me it's helped really makes me smile.

Thanks!!

Please could you re-shoot the bits in close up of where the clamp material goes into the clip - it is not very clear. However you are the only guy on here who shows us how to do this at all. Thanks

@spidiq8

6 жыл бұрын

BRIAN FLETCHER I can't promise but I'll check to see if I still have some clamp material left in the kit and redo it if so. I'll have to dig through my box of bits to see if it's still in there.

@user-bh1oy8kj5q

6 жыл бұрын

Thanks very much. It's the part where the material actually goes into the clip. A close up shot would be ideal. Is that accent Yorkshire? Manchester here. Cheers!

@spidiq8

6 жыл бұрын

BRIAN FLETCHER It is, well picked up on, Sheffield originally but I've moved all over the UK a lot. Scottish Highlands now.

@user-bh1oy8kj5q

6 жыл бұрын

South Yorkshire is said to be similar to the Manc accent. The Corrie actress Liz Dawn fitted in the soap well - she was from Sheffield. It's funny that West Yorkshire is much closer though. Fascinating (to me!).

v nice

thank you your presentation helped me. but most of the was out of video

@spidiq8

8 жыл бұрын

+alfredo leiser Apologies for that, it's hard trying to show close up detail and stay in shot, hopefully you figured out the necessary steps to the clip assembly

I had this lying around the house wondering what's it for

Just bought same kit and I was like wat the f##k anyway your video help thank you very much wife can stop moaning now

@spidiq8

6 жыл бұрын

lee neilson Do they stop? ;) Glad it helped.

It would have been better if we could have seen what you are doing, have a look at your video

would be nice if your demonstration was in the view of the camera

@spidiq8

Жыл бұрын

Please see the numerous other comments and replies re this.

The camera was not high enough

What’s even crazier than the product packaging shown the wrong way to assemble these clamps is not showing it at all, like you have done here. I hope that you get the camera cooperating with you by the end of this video

You need to re-video and hold everything within range of the camera shot.

@spidiq8

Жыл бұрын

This has been addressed many times in the comments, it was a case of I was working with what I had at the time and it's not ideal, I know but if I come across the remnants of that kit or pick another up cheaply I will redo it.

GOT THE IDEA, BUT IF YOUR HANDS WERE IN VIEW ALL THE TIME IT WOULD BE CLEARER AS TO WHAT NEEDS DOING, CHEERS,

@spidiq8

Жыл бұрын

This has been addressed many times in numerous replies. If I get the chance i'll redo it one day

It would be nice if you had positioned the camera right.

@spidiq8

Жыл бұрын

Please see other replies

Thanks for trying to help. But you gloss over the key detail of how the dead end fasten to the worm gear gismo. Apparently it is obvious to you but not to me and your hands are in the way and the piece is bouncing out of carmera view at that key moment. You explanation of this detail is not clear.

@spidiq8

2 жыл бұрын

My apologies. At the time of filming I didn't have a camera which allowed me to see what I was filming and I realise much of it was out of shot. I don't know if I have any of these left but if so I find them I'll have to redo the video.

Cannot see

@spidiq8

2 жыл бұрын

Yep, I address this in the video, thanks.

Should put the camera in a better place anamd watch video before uploading

Could have been an interesting video if only it was ALL in shot and not off the screen

@spidiq8

2 жыл бұрын

I agree entirely and have addressed and aplogised for this in previous comments. If I ever find where I 'saved' the remainder of the kit I will re film it in frame and in focus.

The entire tutorial was out of camera range. Very frustrating

@spidiq8

Жыл бұрын

I'm aware and have addressed this numerous times in the comments, apologies that it was but with the camera I had at the time I couldn't see what was on screen. If I happen to find the set or another at any point I'll redo it.

You left half the video out of view we give you a D- for a grade. Thanks for wasting our time!

@spidiq8

2 жыл бұрын

You're welcome, I class this as one of the better time wasting videos on youtube. :) I do hope to re film this one day with the relevant bits on screen for the fun of it.

Crap-I thought you were actually gonna show us how to make something. Coulda summed up this video with- if you need a video to figure this out, just buy a ready made hose clamp

@spidiq8

27 күн бұрын

I've intended to re do this video for some time and if I ever dig out the packet I will. At least the explanation of what i'm doing is there.

unwatchable, jfc

worst video ever, keep the camera on your hands

@spidiq8

27 күн бұрын

At least it's not the 'worst' eh.......

@Sauersinger

27 күн бұрын

@@spidiq8 Thank you