🌟HOW TO ADD VINYL TO A TUMBLER USING A CRICUT EXPLORE AIR 2 FOR BEGINNERS🌟
Тәжірибелік нұсқаулар және стиль
🌟HOW TO ADD VINYL TO A TUMBLER USING A CRICUT EXPLORE AIR 2 FOR BEGINNERS🌟
👇👇👇👇👇👇CLICK SEE MORE!👇👇👇👇👇👇👇
Feel free to shop my Amazon Storefront for all my Favorite Things!
www.amazon.com/shop/cricuting...
How to upload fonts from Dafont.com: • 🆎HOW TO UPLOAD FONTS I...
This video is a bit longer than the last few; but it is perfect for Cricut beginners. I told you that for the month of September, every tutorial would be focused on beginners to using a Cricut cutting machine. Please share something you learned in the comments section.
If you are new to using adhesive vinyl, this tutorial will go step-by-step into how to add vinyl to a tumbler. I highly suggest using permanent vinyl for tumblers. If you have been able to find these tumblers that I used in this tutorial, you are in luck!
I have been hearing from you and according to your feedback, you like to have a checklist and I have one for you to follow. Stay with me for all 14 steps, and you won't be disappointed in learning how to add vinyl to a tumbler, using a Cricut Explore Air 2 for beginners.
👉The materials and links you will need are below:👈
✅ Cricut Explore Air 2 - amzn.to/3970RJf
✅ Cricut Standard Grip Cutting Mat - amzn.to/399oyk0
✅ Cricut Weeding Tool - amzn.to/3AdUTCb
✅ Transfer Tape - amzn.to/39GMz2p
✅ Cricut Scraper - amzn.to/2XZygUr
✅ Cricut Ruler - amzn.to/3zd6W1t
✅ Cricut TruControl Knife - amzn.to/39I7n9J
✅ Oracal Black 651 - amzn.to/3uhkDeI
📅Try Cricut Access Monthly Plan:
👉cricut.pxf.io/RyqyR2
👉Feel free to shop my Amazon Storefront for all my Favorite Things!
👉www.amazon.com/shop/cricuting...
💳💳Shop from the Cricut Website:💳💳
cricut.pxf.io/c/3531619/13726...
As an Amazon Associate, I earn a small commission from your qualifying purchase at no additional cost to you.
My favorite weeding tool from 143vinyl.com:
✅ Pin Pen Weeding Tool - www.143vinyl.com/pin-pen-tm-w...
USE MY DISCOUNT CODE TO SAVE AN ADDITIONAL 5% OFF YOUR ORDER.
⭐⭐⭐The links above are affiliate links. I will earn a small commission from eligible purchases, at no additional cost to you.⭐⭐⭐
💖💖💖Thank you so much for supporting me and this channel!💖💖💖
Come get social with me!
linktr.ee/cricutingwithdelonda
Thank you so much for joining me today, and thanks for watching!
Bye
#tumbler #vinyl #cricut
Пікірлер: 139
This video helped me so much!! So thorough! Thank you for going slow. 🙌🏼
@CraftingwithDelonda
Ай бұрын
You're very welcome
You’re so amazing! Thank you for taking the time to explain every step of the way to making your own shirt! I learned so much and ready to make my fist one
@CraftingwithDelonda
Жыл бұрын
Thank you very much!
Hi Delonda! Newbie to Cricut and just found your channel. Love your style and your video was so helpful! Your list is perfect! Thanks so much!
Where were you in my college days? You are an excellent teacher for the visual learner. What a blessing.
@CraftingwithDelonda
Жыл бұрын
Thank you very much 😊 I was probably in college too.
Very good tutorial for beginners. I enjoyed it. I am not very computer savvy. My wife and I are just starting out doing this.
@CraftingwithDelonda
3 ай бұрын
Thank you ❤️
I love how you explain everything from beginning to end. Great teaching 👍
@CraftingwithDelonda
2 жыл бұрын
Thank you very much 😊
The cashier at JoAnn fabrics on 1960 and 249 told me to watch your videos. I’m so happy she did!!
@CraftingwithDelonda
Жыл бұрын
Oh wow! You really just made my day ❤️❤️❤️
Perfect! I love the "get some teenagers" LOL I'll have to show you my scraps box one of these days!! I don't throw anything away! :D
@CraftingwithDelonda
2 жыл бұрын
🤣🤣🤣 you know I have 2 teenagers and if I have to wash the dishes, there is going to be trouble 😅
I sooooo appreciate your checklist. Thank you!!!!
@CraftingwithDelonda
Жыл бұрын
You're very welcome ❤️
The only go to and step by step lady love your video. Can you please share your checklist ❤
@CraftingwithDelonda
7 ай бұрын
Thank you ❤️ It's in the files tab of my Facebook group.
Thank you so much for sharing this video. ❤ God Bless!
@CraftingwithDelonda
9 ай бұрын
You're welcome 😊
I love how you explain ♥️
@CraftingwithDelonda
Жыл бұрын
Thank you ❤️
A great tutorial again, you are so precise in what you do this month. The beginners will be so pleased with you 👍🏻❤️
@CraftingwithDelonda
2 жыл бұрын
Thanks Hennie! That's the goal 💜
Love Love The List!! Appreciate the thorough explanation of this and continue the great work!!
@CraftingwithDelonda
2 жыл бұрын
Thank you so much ❤
omg you are my favorite person!! A list? I love lists! It's the only thing that helps me to function. Thank you so much for helping us. You are a God send!!
@CraftingwithDelonda
Жыл бұрын
You're so welcome!
Love watching you, you show step by step for us newbies …thank you for the video
@CraftingwithDelonda
2 жыл бұрын
You are so welcome! That is my goal and I am so glad it was helpful.
Omg I’ve watched a million videos I finally got it after this one thanks so much
@CraftingwithDelonda
7 ай бұрын
Glad it helped
Thank you! Your video's are so informative. I've learned so much. 💯
@CraftingwithDelonda
2 жыл бұрын
Thank you so much 💙
Thank you for blessing us; the beginner, l just Love watching you Betty
@CraftingwithDelonda
Жыл бұрын
Thank you so much ❤️
The best tutorial!!!!
@CraftingwithDelonda
Жыл бұрын
Thank you!
So easy to follow.Thanks.
@CraftingwithDelonda
Жыл бұрын
You are welcome!
Thanks Delonda! You’re so detailed love your tutorial 💪🏻
@CraftingwithDelonda
10 ай бұрын
Thanks for watching.
Amazing!!! Thank you❤
@CraftingwithDelonda
Жыл бұрын
Thank you!
My 2 favorite lines from this video “won’t he do it” and “get you some teenagers”. I’m here for the crafting and the one-liners.😂
@CraftingwithDelonda
Жыл бұрын
🤣😂🤣🤣 thank you
❤ I never leave comments but I love how simple you have made this video! Plus you talk to me like a normal crafter - thank you so much
@CraftingwithDelonda
Жыл бұрын
Thank you so much!
Omg love your step by step with check list love love it
@CraftingwithDelonda
Жыл бұрын
Thank you! It is also saved in the Files tab of the Facebook group.
Hey Delonda - you and your videos are the best. Thanks for your help!
@CraftingwithDelonda
Жыл бұрын
Thank you so much 😊
Love the list and the video!
@CraftingwithDelonda
2 жыл бұрын
Yay! Thank you!
Great job
@CraftingwithDelonda
2 жыл бұрын
Thank you ❤
Love love love this video! From Start to finish.. very descriptive and very easy to follow steps! Exactly what I was looking for. Thank you for having the patience with explaining for us beginners❤
@CraftingwithDelonda
Жыл бұрын
Thank you so much!
Hi Delonda, you the best teacher, you explain very good,❤
@CraftingwithDelonda
Жыл бұрын
Thank you so much ❤️
Great job teaching. I'm brand new and this gives me confidence to start
@CraftingwithDelonda
Жыл бұрын
You got this!
Hi Delonda ! You are the best teacher with your tutorials . And you explain your self every well.thank you❤️❤️❤️❤️🔥🔥🔥 keep teaching
@CraftingwithDelonda
Жыл бұрын
Thank you so much ❤️
Great video. I was just given a Cricut for Christmas and I’m excited to start on different projects. I found your channel and I really enjoy your videos.
@CraftingwithDelonda
Жыл бұрын
Thank you so much 😊
Nice one again !
@CraftingwithDelonda
2 жыл бұрын
Thanks Angel 💜
Thank you so much. Love the list. And I buy too much too even if I don’t need it 🤦🏻♀️.
@CraftingwithDelonda
Жыл бұрын
You're welcome and I totally agree.
Hey there Delonda! Tonight I actually made my first vinyl project on my Cricut! All because of your great teaching. I used your list and followed along for all the important steps. I have made my first water bottle. I may be slow to get it, I may have to watch several times, but you have such an easy style of teaching. I LOVE 💕 Learning with DELONDA!! Thank you much. I feel accomplished. 🙌🏾
@CraftingwithDelonda
2 жыл бұрын
Now this makes me SUPER EXCITED! I can't wait to see it! Post it in the group if you feel comfortable 😍
@SepiaSparkles
2 жыл бұрын
@@CraftingwithDelonda Grand Saturday Delonda, I will try to figure that out. I used an old water bottle to experiment on. I’m truly pleased.
I love this video it helped me a lot
@CraftingwithDelonda
Жыл бұрын
Thank you ❤️
Good morning, Delonda!!! Here I am watching your previously posted videos! As you well know by now, I’m still a beginner and still learning. Like you, I tend to overshoot on my supply purchases. I LIKED ORDERING MATERIALS AND VARIOUS SUPPLIES!😊 I am relieved to see that I pretty much have all the things that you have been mentioning in all the back to back videos that I have been watching since I woke up at 3 A.M.; it’s 5:39 A.M. now. You tickled me when you talked about getting some teenagers to hand wash your tumblers. I just used your link to order the CRICUT knife! 😊. When I got to Amazon and saw the knife up close, I saw that it was like the knife that I already had, but only a different brand. Well, I ordered the CRICUT brand knife ANYWAY!😅 When I clicked to BUY NOW, I saw that I had a courtesy gift card IN THE SAME AMOUNT AS THE CRICUT KNIFE, which was now available at 80% OFF! So I snatched that thing right up! Thanks, Delonda, for another amazing video! Now, I will have to make my first plastic tumbler with some of that permanent adhesive vinyl that I have had since I first started purchasing materials for projects to learn to do; I’ve had it for nearly a year now. I purchased my CRICUT cutter machine in February of 2022, and have been watching crafting videos even since BEFORE ordering the cutter. I learned that I have better success when I go back and rewatch the videos as I begin to do a project; I did that last evening when I attempted to use the 3-D PUFF VINYL on a cap. I think I need to figure out the correct amount of pressure because my puff vinyl didn’t puff up as well as it should have. Perhaps, I used too much pressure. 😢 Again, thank you for teaching all of us beginner crafters. You are greatly appreciated! Happy Holidays! 💐🧧🎁🎄🌹🎉♥️
@CraftingwithDelonda
Жыл бұрын
Awe. thank you so much! I really appreciate you taking the time to say that.
Kraft board Works Perfect And Card stock Intricate Cuts Perfect Every Time.
@CraftingwithDelonda
2 жыл бұрын
Thank you!
Hi Delonda! I just found your channel. I got a cricut machine last Christmas and 9 months later in finally getting around to it! Your video was so helpful and clear. And I look forward to making my first projects this week.
@CraftingwithDelonda
Жыл бұрын
Thank you ❤️
@rhouse4958
Жыл бұрын
Same lol. I need to do 12 tumblers for a cheer team and clueless.
Hey! furbaby Mylo! 🐕The Tumbler was so cute!!😁
@CraftingwithDelonda
Жыл бұрын
Thank you 😊
I just subscribed! I am a new cricut user, and I am terrified! Your video here makes me at ease, and I plan on checking in with your videos as I progress! THANK YOU!!
@CraftingwithDelonda
Жыл бұрын
Thank you so much 💙
I feel you on that Delanda LoL. I certainly over buy.
@CraftingwithDelonda
Жыл бұрын
I wish I could say I’m trying to stop; but unfortunately I’m not 😂😂
Thank you
@CraftingwithDelonda
Жыл бұрын
You're welcome
@barbarameidel7726
Жыл бұрын
@@CraftingwithDelonda where can I get the cheat sheet?
@CraftingwithDelonda
Жыл бұрын
It’s in the files tab of my Facebook group.
Just stumbled on your channel looking for how to add vinyl to a tumbler as I have never done this ever. I love the idea of of having a list of instructions to follow. How can I get your list🙏
@CraftingwithDelonda
Жыл бұрын
Awesome! Thank you! It's in the files tab of my Facebook group.
Hello there Delonda 😎 I’m here checking out your courses again. I just watched your slice, weld, contour video again. I’m getting there, thanks for your easy tutorials. Do you have copies of supplies needed list to make an item? I love how it keeps you on point. Thanks again. 🥰
@CraftingwithDelonda
2 жыл бұрын
Yes! The lists are in the files tab on the Facebook group.
@SepiaSparkles
2 жыл бұрын
@@CraftingwithDelonda OMG! I’m 64 and still trying to figure all of this stuff out. 🤪 I need to get to FB and figure it out. Thanks for your kind spirit! God blessed us with your channel. 🥰
@CraftingwithDelonda
2 жыл бұрын
Thank you! You must be aging in reverse ❤
Great job explaining. Very detailed. Will you be doing any fall or Christmas things?? Can't Wait to see...
@CraftingwithDelonda
2 жыл бұрын
Thank you so much! I have a playlist that has 4 different Christmas projects. Let me see if I can share the link here.
@CraftingwithDelonda
2 жыл бұрын
Christmas in July kzread.info/head/PLhsFSoFd3CL31DXgpuNqCVLVKgsPIX9Un
I have always been told Use a Cheap Coffee filter to wipe the alcohol. Paper towels can leave LINT .. TIP/Hint
@CraftingwithDelonda
Жыл бұрын
Thank you
Can I please get a copy of these instructions please
Dalonda do you have the step by step tutorial for downloading and printing, the sheet where you are putting the measurements, this would be so handy to keep track of, and mark them as to which tumbler. I bought each of my grands this same tumbler and put all there names on them, no well i might add. Reba
@CraftingwithDelonda
Жыл бұрын
Hi Reba! I have this list of instructions in my Facebook group. It's in the files tab.
New to Cricut and just found your channel. I love your easy concise directions and those checklist. Where do I find the project checklists? Thanks in advance
@CraftingwithDelonda
2 жыл бұрын
Thank you ❤️ They are in my Facebook group.
@barbarachambers4910
2 жыл бұрын
@@CraftingwithDelonda awesome I just requested to join. Still binge watching!
@CraftingwithDelonda
2 жыл бұрын
Thank you ❤️
@nahnisjourney1406
Жыл бұрын
Oh my goodness! I’ve been binge watching her videos since I FINALLY opened my CRICUT cutter! I didn’t dare attempt anything without consulting her on point and well outlined instructional videos! I’ve enjoyed every single video! Her birthday video just started and she’s wearing pink and holding up a breast cancer awareness design because she will be observing Breast Cancer Awareness for the entire month of October. I do the same because I’m a 14 year breast cancer survivor and STILL COUNTING! HAPPY CRICUTTING!!! 🎉🌹♥️
How can I get a copy of your list to go by at home. I have had my C2 for a year do know y I am Scared to do A project But you make it so easy hopefully I can
@CraftingwithDelonda
Жыл бұрын
The list is in the files tab of the Facebook group. The link to join is below the video.
Hi I'm new to ur channel and cricut I already love ur videos now I do have a quick question how can I get that white thing that ur supplies is hanging on?(in the background)
@CraftingwithDelonda
Жыл бұрын
Thank you! It's pegboard and you can find it in my Amazon Storefront: Shop my Amazon Storefront: www.amazon.com/shop/cricutingwithdelonda
@kilowshowers6342
Жыл бұрын
@@CraftingwithDelonda so as we speak im trying to do the love picture and my love is a little bit bigger than the white frame on design does that matter cause i did both the word and rectangler 7.75/3.75 im using explore air 2
@kilowshowers6342
Жыл бұрын
IDID IT MRS.DALONDA THANKS!
Hi Delona... your tutorials are fantastic. Sorry if you have already replied to similar comments 1000 times already, but why did you have to weld a font when using script font? is it to make weeding easier? I made my first waterbottle other day and I think it came out ok and didnt weld it. Thanks for everything you do!!!
@CraftingwithDelonda
Жыл бұрын
Thank you so much! I usually weld script font to make sure it is fully connected and there are no cut lines.
@vinrc
Жыл бұрын
@@CraftingwithDelonda I hadn’t even considered that. I did learn that I probably didn’t use a great font as was a little hard to weed. I did have a slight break but stuck with it and can’t tell now on bottle. My partner was very happy so that’s main thing!
i need this list, how can i get a copy?
@CraftingwithDelonda
Жыл бұрын
It is in the files tab of my Facebook group.
Are we able to purchase and/or download these checklists somewhere???? Lol asking for a new viewer😂😂
@CraftingwithDelonda
Жыл бұрын
Hi there, they are available in my Facebook group.
This is one of the things I am scared to do, apply adhesive vinyl on any tumblers. It never stays very long!
Hi Dolanda my name is Eunice and i was wantng to know can you use vinyl on a colored tumbler
@CraftingwithDelonda
Жыл бұрын
Hi there, yes you can!
@eunicerogers7191
Жыл бұрын
Sorry for saying your name wrong. Another question, can I sublimate without using a sublimation printer sorry if I'm bugging you too much
@CraftingwithDelonda
Жыл бұрын
Thank you for correcting my name! I love my name, lol! You're not bugging me at all. You will need a sublimation printer. They are currently on sale at Target for $179!!
Hello my name is Jean and I am 65 years old I really would like to have that spreadsheet that you use I've seen two tutorials so far with that spreadsheet are they available
@CraftingwithDelonda
2 жыл бұрын
Hi Ms. Jean, are you referring to the checklist?
@jeanwalker2473
2 жыл бұрын
@@CraftingwithDelonda yes the sheet that she went through explaining how you did everything
Do you still have a group on Facebook?
@CraftingwithDelonda
Жыл бұрын
Yes, it is linked below the video.
@ChaunaCasteel
Жыл бұрын
@@CraftingwithDelonda The linktree link? If so, it isn't working for me.
@CraftingwithDelonda
Жыл бұрын
facebook.com/groups/272801197679910/?ref=share
❤”I over shop and you can’t tell me in that moment that I don’t need it” ❤ me too D Thanks for a beautiful tutorial!
@CraftingwithDelonda
Жыл бұрын
🤣🤣🤣🤣 exactly! You're in good company! Thanks for watching 💙