It was very helpful. Thank you.

very good thanks

Very good

Thank you

👌👌👌👌👌👌👌

it´s possible to use a custom template to only give access some days in specific timelapse? I try it but it ignore de custom template

Did this with the original card I got with the ds-kd8003, everything went well until I tried to apply all changes and it failed saying the card is not supported. same happened with a Mifare chip I bought. the reader is able to read it but it fails when I apply the changes to the device. Any suggestions?

What is the connection setup between the laptop and the card reader (the unit with the bell and camera) ? Because the unit is already installed on the wall and I don't see any loose cable or port to physically connect to the laptop.

@securitypartner7418

2 жыл бұрын

by network

is it possible to give user only access in time slots? e.g. Mo-Fr 8-17 ?

How do you make use of the SD Card on this model? Can it be formatted through admin page as it is not visible. Great content

@securitypartner7418

2 жыл бұрын

yes. you can log in through web browser and format SD card from configuration page

can be add a user and a card for opening door 2 with this device?

Dear friend I have recently gotten (KH6320 indoor station along with KD8003 and card reader) installed by company. I have tried to program a card through the process you explained, but the problem KD8003 is not showing. I've seen somebody using similar devices on KZread without any issue. Any idea why I am facing this problem.

@securitypartner7418

2 жыл бұрын

The default ip address is 192.0.0.65. Try with that Ip. if not, check in the screen device managent, the outdoor device will detect automatically there.

4:10 what is the importance of "*Template", I have followed your same procedure but as a test I've selected "All-day Denied" template despite keeping the ivsm 4200 running or shutting down the pc, the programmed card was still opening the door!!! So what's the use of this template then?

How can we remove one of the access card from these intercom

Hi Hikvision vdp 603p Problem is unlock failed Installe time worked After 3days problem

Since we have NFC on our mobiles, can we use our mobiles instead of the cards? Thank you

@securitypartner7418

2 жыл бұрын

not support

Hello, is it also possible to load a mobile phone via NFC? I've tried attaching but it generates a different number each time. Thank you

@mxcxpx

4 күн бұрын

iphone is not working. ...Android yes

My card is not being read by the software. But in your video it instantly reads it. I followed all the steps and the device is online. What could i be doing wrong?

@seguricam6855

7 ай бұрын

Maybe you are using the card that came in the box, it is a master card

For Delhi

Error applying user to access group ....iVMS3715

hi bro, i got offline in resource usage status and HCNetSDK.ddl[7] error. please can you help me bro?

I want to get VDP configuration done so please provide for engineer number.

Hello, I have a problem with my door station Hikvision DS-KV8113-wme1(b) with the last firmware update V2.2.53 build 220816. Unfortunately, I am trying to read a card to acess my door. When I add the person with iVMS-4200, the door station villa reads the number the card, and absoletuly fine. I add the user to organization to give permission with the template All day and aplly the changes to the device. Everything perfect. When I try to read the card to open the door gets the message on the iVMS-4200 “Invalid Card Swipe Event” and I cannot acess.

@richardtunega485

8 ай бұрын

I have the same issue, did you find out solution ?

@Rikard850

8 ай бұрын

@@richardtunega485no :/

What type of card is accepted or what type of frequency is it because I lost my card?

@securitypartner7418

5 ай бұрын

Mifare card 13.56 Mhz

Does not work mine

يوجد داخل الكرتون كرت لم أفهم طريقة التشغيل الكرت

@seguricam6855

7 ай бұрын

​ It is a master card, pass this card over the device you hear 2 beeps, now pass the new card you hear 1 beep finally pass the master card again you will hear 2 beeps that's all.

@1abuyazan

7 ай бұрын

Hello, thank you. It has been activated