You can find TPMS tool here (cheaper): ebay.us/kU4OW7 or here (fast shipping): amzn.to/3IBYyip (these are Amazon & eBay affiliate links)

@alicegan8419

4 ай бұрын

hi dear , we are TPMS manufacturer , contact me for best factory TPMS price

@Mpireformeto

2 ай бұрын

SO WOULD THESE SCAN TOOLS WORK ON OEM TPMS SENSORS???

@DIYtime

2 ай бұрын

Yes

I have a set of wheels that I had put aside for six months after installing the TPMSs in the wheels, car didn’t recognize the sensors when I reinstalled the wheels, your tip on waking them up by letting the air out for 3s seems to have woke them up and the car now sees the sensors. Thanks! Saved me a trip to the tire shop.

@yudicendrawan6871

8 ай бұрын

Did you trigger with tpms scanner the same time you released the air 3 second or not? Thanks

This worked, thank you! I had only done TPMS relearns four or five times before, and I had never ran into a sensor that wouldn't trigger with my Autel MX808S-TS (other than known bad ones). I had four new OEM Ford TPMS-35 sensors installed today and one wouldn't trigger when I tried a relearn. I tried three times and was convinced that I had a defective one. After watching your video I tried to trigger it while releasing air from the valve stem, and after about four or five seconds it still wouldn't trigger. I stopped releasing air and was ready to give up on it and heard that beautiful "beep beep beep beep" and looked down to see that the sensor had been recognized! I was literally in the process of standing back up when it triggered.

@DIYtime

8 ай бұрын

Great!

@arturodiaz2603

2 ай бұрын

I have the same exact issue now with new wheels all but one doesn’t want to train did the same as video ? Any ideas?

Thank you for the video , despite the fact that I don't yet have a sensor scanner .

on target this exactly what i needed. taking the air out and waiting a minute and then re trigger is correct

Thanks for the video. I tried this for a Continental Redi-Sensor SE10008 and deflation as well as a magnet does not wake these sensors up. I did see a SnapOn tool that had an activation capability within the tool where my Autel does not.

Thank you for the video. I was wondering why I cannot scan my brand new out of the box REDI-Sensor and I was about to return it. I'll get it installed and then try scanning it.

@DIYtime

Жыл бұрын

👌🏼

I have a toyota and the software to input the new sensor ID. It shows on the cars computer now but will I need another tool? Can I install and using the toyota software check things? Under the dash of my prius there is a tire pressure system reset switch. Maybe I'll need to hit that also.

Just so you're all aware in case your pressure light is on and you think the problem is one of your main 4 tires has a bad sensor make sure you check the spare tire as it also has a pressure sensor

@skeet25s

Жыл бұрын

That bit me on my wife's 4runner. I was scratching my head for a while, until my wife came out and said "did you check the spare?"

@DIYtime

Жыл бұрын

😁👍🏼 Wife got a point on this one!

@MrRedHotChiliMan

6 ай бұрын

@@skeet25shope you gave her a nice little spanking after that one 😆

I have unreadible only one sensor and as per instruction I must have possibility to read all sensors ID from the car and after to copy to new one.But I can not on bmw g30 2017,2019.

Ive been able to test good sensors before installing with the autel tool. Ive had 0 luck bringing new dead one back after installing airing and deflating

Suzuki Vitara S. I did manual tpms reset procedure and programmed all id's (automatic re-learning didn't work). I hope successfully as at the end tpms led was solid for approx. 5 sec which means success as far as I found. However I have another problem. After turning ignition on and reaching approx. 30 km/h, tpms led is blinking showing with this blings digits 1,2,3 and next it blinks for approx. 10 km-12 according to sequence "long off, short off". After approx. 10-12 sec it blinks agains digits 3, 2, 1 (in reverse order, each digit is being blinked few times) and then I got the correct pressure values displayed when I enter tpms menu (earlier there is nothing). Do you perhaps know what this 1,2,3 - long off/short off - 3, 2, 1 sequence means? Is that some kind of calibration? And the problem is that this "calibration" procedure is repeated every time after turning off and on the engine (only if the engine is off for short time the system doesn't run again calibration). How to "remove" this "calibration"? There are not DTCs codes visible for typical diagnostic software.

Thanks 🤩

What If I buy a regular tire or tires for spares and I have the current ones. Do I still need to program the sensors on the new spare? And I am not talking about the emergency spare.

@DIYtime

Жыл бұрын

Depends on how your car is. Most cars dont have spare tires included in TPMS ECU.

I put brew new tires how come my sensor comes on ?

It won’t read if you put the scanner near the rim. Put it on top where the tire is and it always works

Are these marsflex sensors?

Instruction Tag on DENSO 550-0103 aka Pacific PMV-C11A reads: REGISTRATION BY PRESSURE During the Trigger Step release air pressure from the wheel assembly (for about three seconds), Immediately followed by tool trigger initiation. The ID data should then appear on the tool. Continue to follow the procedures the tool requires to finish sensor registration process.

@northwestrepair

5 ай бұрын

that did not work.

I got from the continental (redi-sensor) tech line that Autel's maxiTPMS tool won't activate their "new generation" sensors. Never had a problem before...

@roughboygarage1475

Жыл бұрын

Having the exact same problem with continental sensor

Please, I've installed it by still the sensor light is on

Nice! But the problem here is you do not know until is too late if the sensor will trigger or not! If it does not activate, you will have to disassemble the wheel again to change the valve and sensor. This is what happened to me :( The ideal is to be able to activate the new sensor before installing it. Here is the big problem with TPMS tools. They activate the generic sensors of their brands very easily, but it is much more complicated with the OEM ones

Does not work. Brand new sensor. Deflated, drove around, inflated etc, no change.

Hi I just purchased this and got it installed from a shop but they said they cannot program it. It says on the description that it’s pre programmed already, I turn the tpms on with my tool but still the tpms light still on in my 2015 sienna … I try to reset the light but doesn’t work, what should i do ? Does it need it to relearn. This is my first time doing this.

@DIYtime

Жыл бұрын

It cannot be pre-programmed. Each sensor has unique ID. Sensor ID’s need to be added to TPMS ECU after replacement. This vidro goes into mo details on that: kzread.info/dash/bejne/fJqFsqt_ddvFlJs.html

I need some help on my 2017 Chevy Malibu only the front passenger tire won’t relearn with the tool is not reading it I’ve tooling out air out of it and nothing I change to a new sensor and nothing it’s the only wheel that won’t beep when I put the machine on it can some one help

@DIYtime

Жыл бұрын

So appears your original sensor is 6 y.o. and battery died, so it wont register. Did you buy new OEM or generic Autel sensor? I would check compatibility of that sensor with Autel tool.

CAREUD TPMS is there to keep you safe

It's a good tip but didn't work for me. i installed new sensors bought from Amazon. None of them working 😮‍💨.

@benzw2505

9 ай бұрын

Same happening here, new from Amazon. 2012 Silverado, can’t get them to relearn with snap on computer either. Thinking we both got faulty sensors. .

@Romans_116

3 ай бұрын

What can you clarify what you mean?

@claudiosantana3320

2 ай бұрын

I bought a 4 pack last year from amazon marsflex, only needed 1 but, only 2 worked of the 4.

Hello, I am a TPMS factory in China. How can I contact you?

what if a sensor is already programmed but you want to re-program it for a different car. How would you then go about that.

@DIYtime

2 ай бұрын

It will work. Watch my video “MaxiTPMS tool review”, I show how it’s done.

@Tonyplat98

2 ай бұрын

@@DIYtime thanks

didn't work for me too. I inflated to 40psi and back to 20psi about 5 times. I did the 3 seconds deflation numerous time while scanning with ts508wf. Nothing. I replace the denso sensor. Got a new one installed. Same thing. Dormant. i really dont know what to do now. Plz help

@DIYtime

Жыл бұрын

Yeah, I am seeing 50/50 success rate. I wonder if this has something to do with overheating. Recently I was testing new portable air compressor for review video. All of my sensors were fine. I fully deflated one tire, and pumped it back up. Immediately after that I got blinking TPMS warning light. The sensor is dead now and won't respond to TPMS tool. I suspect rapid deflating/inflating back to back could have generated a lot of heat and damaged the sensor. My compressor takes 5-6 minutes per tire. Many be that's too long for sensors. Tire shops have heavy duty compressors and those probably need less than a minute per tire.

Man, I have to buy a specific stupid tool just for tire pressure sensing? foolish tech , I'd rather go back to having cars just not equipped with this, it's not like it's hard to tell when you are low by air in a tire for crying out loud. The tire dash light doesn't bother me enough, I'll just leave it, f that. Or take apart the dash and get rid of the led.

@averyscar3132

7 ай бұрын

Cause taking apart the dash and taking the light out is sooooooo much easier then just buying a 15$ tool

@DAV1979

6 ай бұрын

I mostly agree with you and get what you're saying, but a TPMS sensor can give you an extra few seconds or minutes to pull off (or at least reduce speed) before a catastrophic blowout happens. But yes, it should be a habit to regularly check your pressure. I do once a week, especially during temperature changes.

@felizbmw

6 ай бұрын

Compra o FORScan e um elm237 e desabilita a função no painel foi isso que fiz

@HybridEnergy

6 ай бұрын

@@averyscar3132 It is, it's free and a permanent solution to a problem.

@MrRedHotChiliMan

6 ай бұрын

Yeah, some are much more annoying than others. My wife’s car gives me a TPMS error message and the flashing indicator all the time that’s annoying as f. My Tacoma on the other hand, only has the indicator light that stays lit which is perfectly fine by me. Totally agree with you though, what a PITA.

Unfortunately it did not work for me!! It's' a brand new sensor to????

I’m sitting here scratching my head with the same scanner and a brand new tpms sensor i’m going to try this later on Thanks! :)

@DIYtime

Жыл бұрын

Yeah, I had the same problem very first time. Thought brand new sensor was dead, but later somebody mentioned that here on KZread. I tried snd it worked for me. Sometimes you may need to wait a little longer, or try a few times.

Bought Bosch sensors for a Tacoma. My Autel 508 wouldn't program it. After investigating, I need a $1,000 tool to program them.

doesnt work

virker ikke med vores bil.

This tool doesn't recognize Continental Redi-Sensors.

Doesn't work.

Tried this 3-4 times and didn’t work.

so sensors go to sleep if no pressure?

@DIYtime

Жыл бұрын

No, new sensors are asleep, to save battery.

@jamescornflake1542

Жыл бұрын

@@DIYtime OK. Thank you Mr DIY Time. The reason I ask is cos a mate had to remove lots of tyres from steel wheels and didnt need the sensors and he gave me a bag. I was wondering if they stay good to use in my car if needed in future. Please.

@DIYtime

Жыл бұрын

Battery usually lasts for about 6 years.

@jamescornflake1542

Жыл бұрын

@@DIYtime Fair enough. it's been about 6)))

Suzuki sensor (continental system) don't become active in this way.

You’re telling me all you have to do to program the sensor is to touch a scanning tool to it and that’s it after installing the sensor ??

@DIYtime

2 ай бұрын

Pretty close, try again.

Nope that didn't work either

Did not work

No, it didn't work. I'm at a loss.

Thanks for tip! 2 quick questions: Is it ok to activate the sensor before installation? Will the pressure-releasing trigger a dormant sensor as well? Thank you.

@soikothassan6717

Жыл бұрын

Some Brand sensors won't work at all with your programming tool, assuming you have the MaxiTPMS Programming tool. Because some brands just want to make people sell their own brand's tool, they make it so that only their programming tools are compatible with their sensors. It is perfectly fine to program sensors before installation. Actually, that is my preferred method, but some sensors just won't trigger unless put in the tire, hence the video. I don't know if the dormant sensor will trigger that way. Hope the person who made the video answers.

@samperez4984

Жыл бұрын

I tried using an Autel 501 on my 2018 ram I put a new autel sensor in the l/f wheel.I can’t get it to trigger.I tried scanning the r/f sensor and it didn’t read either?I walked over to our Honda and the machine picked them up right away.Any ideas?

@DIYtime

Жыл бұрын

Even within Dorman brand, there are different types of sensors, some will trigger sone wont. You just have to be aware of this process and try it when necessary.

@DIYtime

Жыл бұрын

GM possibly requires their own TPMS tool.

@jhuff692

Жыл бұрын

@@DIYtime I have an older truck and want to install an aftermarket monitor. Is it possible to pair any stock sensors with aftermarket monitor, granted they both operate on the same frequency?

TPMS is the biggest governmental mess.

TPMS what a big waste of $$$. Automakers please stop trying to help us. You aren't!

Hate these damn sensors