When I go to the "Input signal senting" options and switch everything to NTSC, then I go back to "Front Monitor" and select NV and the camera works. When I go to END to save the settings, it reverts back to the original PAL. Is the last camera not working? I installed the camera, the supermarket supports PAL/NTSC type.

I have same unit but dont have audio, tel, and system option. Is that conected with navigation so without navigation i cant get those two. To use aux i must go to open cd and then chose aux.

Good day how do you save settings in emc measure mode I go to the fan settings for eg and its set to 60% and I change to 100% but as soon as I go out and come back its back to 60%

I got 2015 CLS 63 s dose anyone know how to enter engineering mode? I’ve tried everything I’m only getting dealer menu and not much you can do in that menu.

Hey I have a w212 2010 any idea how to check the map version on it

How can i change the music equalizer from ECE to USA?

Can I use this to change the setting to automatically connect to last Bluetooth device when I start the car? My car used to do this automatically but recently stopped and I’d have to manually select it every time now.

@faiselshuib

4 жыл бұрын

Hi i had a similar problem delete the phone history of connected devices and the cars history of paired devices and try again this worked for me.

i have E 350 2009 do can get Engineering menu ?

How can I find out which EU Comand is required for a Japanese S 350 W221? Thanks.

Hi, I have W212 2015 E220cdi with NTG5/5.5 Comand Aps. I couldn't access to engineering menu. Neither EndCall+1+# nor EndCall+3+* worked for me. Is there anyone who can suggest any other key combinations for my car? Thanks in advance,

I have to manually input my car settings because I purchased a new command unit. Once I turn certain features on, what do I do next so that car can reload with the new features? Do I just press end and exit or do I do a system reset? Thank you

What about the sound equaliser setting

You seem like the guy I need lol, I have a w212 that I just change the battery on, everything is working fine except the radio no longer switches on by default, I have to push the on button every time I get in the car, would you know what setting I need to change to default it back to on as default, thank you for your time.

@killerhertzmercedes

Жыл бұрын

Try manually switching it off, before you turn the car off. Lock the car, then re-open it, start the car and the radio. then after 10 secs or so, switch off the car with the radio still on, it should remember this setting.

Hey how do I do this on my 2017 cls63 w218

When i drive the volume lowers and when i stop the volume goes up to the normal level how do i solve this

Great video … I have the ‘09 w211. Do you know how to get in to engineer mode there ?

@killerhertzmercedes

2 жыл бұрын

Check my other video: kzread.info/dash/bejne/dIejptStYtqvmpc.html&ab_channel=KillerHERTZMercedes

Hi Do u know how I can get into w221 / 2012 merc engineering menu?? Or have u done a video for this ?

@mk2hot4dis

4 жыл бұрын

anyone?

@JESUS_IS_GOD

4 жыл бұрын

Following

@M1Iceman

2 жыл бұрын

The 2012 model is such a pain

Vă rog să mă anunțați dacă puteți, am o mare problemă, nu îmi mai apare radio în media pe ecran. Ce pot face?

I have a A200 2015, can I activate the door open alert in screen with this menu? And the sound volume bar?

@killerhertzmercedes

4 жыл бұрын

You will need to get it on STAR diagnostic for that.

Does the Glk 2010 work?thanks

I have a GLA 45 AMG 2015 … how do I check my speakers?

No matter what I do, I cannot get into the reset menu. At one click I receive a “Take Your Key from Ignition” prompt. Two clicks, and I can see the trip/odometer screen, but nothing happens when I push the call and ok buttons after holding them for approx. 5 secs. There are no other known issues with key. Any help would be greatly appreciated. Thanks…

@killerhertzmercedes

2 жыл бұрын

Are you watching the correct video/correct NTG version?

Question for u. My wife has a 2009 E250 cdi NTG4 MB connector in center console audio 20. I have a 2011 ntg4 audio 20 with AUX PORT IN GLOVE BOX E250 coupe. No Bluetooth audio option in either of them in menu. iPhone connect for calls works just not music. Engineering mode looks completely different to yours any ideas.

@killerhertzmercedes

2 жыл бұрын

Hi, Audio 20 is different that COMAND which is why yours is looking different. I am not familiar with Audio20. anything mentioned in handbook?

@bigdmc6459

2 жыл бұрын

@@killerhertzmercedes nothing. Strange that my radio software is the same as hers and mines 2 year later. Is audio 20 and command just software or are they different hardware radios. Can I just get a software update?

The author is asking for your help, in the engineering menu I pressed the button # 8 to update, after which I lost the sound, what should I do to get everything back?

@fatjontahiraj3877

5 жыл бұрын

Me too. How did you fix it

hey there i got 2015 cls 63 s amg, do you know to enter engineering menu? i try hangup+#+1 didn't work for me, can you have a video of that model plz and thank you

@KayAnderson888

3 жыл бұрын

did u figured it out bro? I am having the same issue

@marsautoservice2775

3 жыл бұрын

Kay Zhao no

How to change location from Japan to USA?

Can someone tell me what is odometer km on secret menu please?

Wish I could use this to figure of I have blind spot assist and parking assist. Seems like those features are hidden or didn't come with my 2010 4matic

@killerhertzmercedes

2 жыл бұрын

If they are not already visible, then it would appear that you car wasnt spec'd with these options from new and would need retro-fitting.

Amg logo for 2014 cla 45? Seems like similar format

Hi i pressed on update and now its blocked and i dont have any option to exit.How can i quit?

Hi how can I change my colour scheme from the one on this video to the black and red . Any suggestions or fixes would be appreciated 🙂

@killerhertzmercedes

2 жыл бұрын

You cannot manually, different software versions had different colours...

Those km on odometer is the real km of car? Please tell me

Hello, you know how to change the logo for the Amg, mine already brings the gray letters, greetings

@killerhertzmercedes

3 жыл бұрын

You can only on NTG 1.0 version (see my other video).

Wie kann ich schauen welches update jahr ichhabe? Grüße

What about the w221?

But hot to select a color in the color bar section

Nice video. Any idea how to do it on the w221 2010 s class ?

@killerhertzmercedes

2 жыл бұрын

Should be the same if its NTG 4

hi thank u for ur amazing video?when I drive my car Mercedes w212 e350 2010 at first start distronic plus inoperative when I stop start it again it work sorry to hold brakes doesn't work to at the same time plz advise

@mikeamade2155

4 жыл бұрын

on highway

@markvanmeurs3861

4 жыл бұрын

Kassem Amade Check main battery

I tried this method in my 2015 e350 Usa would Not Work. Why ?

I don't know why.. when i did it same way, the engineering menu is different with this video. In my car, when i push call up + # + 1 button together, the screen is like this linked video below. kzread.info/dash/bejne/fa6L06Sel5asgsY.html Does anyone know how can i access the engineering menu like THIS video?

could you please make a video for ntg5? I looked everywhere and couldn't find how to activate it..

@killerhertzmercedes

2 жыл бұрын

Im afraid you need STAR diagnostic machine to activate it :(

@dashcamvids

2 жыл бұрын

@@killerhertzmercedes Thank you!! its a GLC2018 model.. no wonder I cudnt find any videos..

You had the exact same problem I had... No AUX in my car so that parameter was disabled. Thank you so much ! Any chance we can get the car's original GPS antenna to work with the head unit ? I tried connecting the GPS antenna that came with it but I'm getting no signal...

@joeking3154

Жыл бұрын

Aux is in the clove box.

@michelbalencourt904

Жыл бұрын

@@joeking3154 Nope, it's not. AUX, when you have the option, is in the compartment under the central armrest, right next to the USB port. I do have the USB port, I do not have the AUX port because that option had not been selected by the original buyer. However, as mentioned in my original comment, the problem was solved by following this video. Oh, and it's a glove box. Cloves are supposed to be in your spice cabinet or rack, in your kitchen (^^,)

By entering the display setting can you change the background colour? Thanks

@chrisretro9380

3 жыл бұрын

On the radio head unit, sorry didn’t make it clear

@killerhertzmercedes

3 жыл бұрын

I'm afraid you can't change it from yellow.

Hello how do I get the AMG logo instead of the Mercedes Benz Logo I was able to do it on my W211 but this X166 is a different ballgame

@killerhertzmercedes

Жыл бұрын

You can only do this on the NTG 1 version.

How change logo to amg w212

@Rima-hh8db

5 жыл бұрын

Doesn’t look like it’s possible (unlike on W211)

in what menu we can see the real kilometers? how we can see it? thanks

I installed a new command controller now it say that i need a program or firmware update?...can i do it here in the Engineering menu and how ?

@killerhertzmercedes

4 жыл бұрын

You will need to get it on a STAR diagnostic machine & also have a firmware disc.

@gwendolynholloway1284

4 жыл бұрын

@@killerhertzmercedes sorry im talking about i installed the center console controller knob that spin to scroll and control the functions on the screen, also press down for enter or select.... and i got the NTG4 navigation update DVD .. that the firmware disc ? ...... do i still need to do the same procedures you mention?

@mapperofalthistory03

2 жыл бұрын

@@killerhertzmercedes does it work with delphi ?

Hi , anyone knows to change regions on my navigation, car bought in the USA and now located in Europe , would like to update the maps do I need to change regions ?

@killerhertzmercedes

3 ай бұрын

You would be better off sourching a replacement COMAND unit from a UK car and swapping it over.

W212 2010 E550 dose color bar mean changing the ambit lighting ? And it worked find I’m so lucki to have BT now 😎🙌🏿🙌🏿🙌🏿🙌🏿🙌🏿🙌🏿

@killerhertzmercedes

2 жыл бұрын

The colour bar only tests the screen.

Anyone know how to access engineering mode in an 2011 slk 350

@Raje617

Жыл бұрын

I'd like to know too

Would it work on 2009 Mercedes-Benz ML320?

@killerhertzmercedes

2 жыл бұрын

As long as it has NTG4

Does this have the hidden AMG logo for start up??? Thanks

@killerhertzmercedes

Жыл бұрын

afraid not. it was only for the early NTG1 cars

What do you introduce the moving video to show us

@killerhertzmercedes

3 жыл бұрын

Its illegal and extremely dangerous.

how do i check mileage fraud on my 2012 used w212 e220 cdi

@killerhertzmercedes

3 жыл бұрын

Connect the car up to a STAR Diagnostic machine.

How can I change the start mercedes logo to an amg ???

@V8hat

5 жыл бұрын

W212

@killerhertzmercedes

5 жыл бұрын

@@V8hat you cannot.

@V8hat

5 жыл бұрын

KillerHERTZ Mercedes Modifications unfortunately,,, thanks

How do I fix the bonnet sensor alarm?

@sharanpreet5559

Жыл бұрын

Did you fixed that

@arjxsid

Жыл бұрын

Yes

@sharanpreet5559

Жыл бұрын

@@arjxsid bro can you help me as well. It's annoying everytime I start the car

I pressed software update by mistake. Now it’s showing me the message “Error on update”. Is there any way to reset it?

@bkam738

4 жыл бұрын

Joel anderson I think i got lucky. I kept hitting the comand knob and pressing the cd eject button. It would reset and after 30 seconds or so my cd (just a music disc) came out, and the system went back to normal. Im sure it worked only cause I had a cd in the player

@bkam738

4 жыл бұрын

Joel anderson The cd was already in when I started. Once it went to the reset screen after pressing the comand knob, I hit the eject button. Took a few tries.

@bkam738

4 жыл бұрын

Joel anderson Take it to the dealership. If there’s any independent benz mechanics they might have an update disc

@razvanmuresanu5487

3 жыл бұрын

Do you fix that?How?

HELP. My unit is now in a boot loop. How do a restore it.

hi i have E220 bluetec 2015 , when i press it doesnt go engineering mode, when i pres red phone button + 7+ 9 it goes dealer mode, please help me to get in engineering mode

@killerhertzmercedes

5 жыл бұрын

You need to press buttons in correct order, as per video

@ghettospinners25

5 жыл бұрын

KillerHERTZ Mercedes Modifications tried it just like the vid and it didn’t work... 🤷🏻‍♂️

@killerhertzmercedes

5 жыл бұрын

@@ghettospinners25 if it's 2015 it will not be NTG4 as in this video...

@ghettospinners25

5 жыл бұрын

KillerHERTZ Mercedes Modifications ok yea my car is a 2016 E350 built 04/2015 guess I’m shit outta luck lol thanks for the reply

@mokaf7ah

4 жыл бұрын

@@ghettospinners25 did u find out how? I have e350 2016 too and couldnt find a way to access engineering mode

On my w204 I cannot get to EVM mode. If I press the the keys it goes into the comtel. I think I by mistake have reset the system and this has happen. The Navi option is also gone.

@ahmara9875

2 жыл бұрын

Need urgent help please

@killerhertzmercedes

2 жыл бұрын

If you have fully reset it, im afraid you are going to need to get it diagnosed by a Mercedes STAR system.

@ahmara9875

2 жыл бұрын

@@killerhertzmercedes thanks for the quick reply. I did reset the system in the ECM mode but through the option that is available under main screen System. It said data will be erase but did not think hat the NAVI option will also disappear and I will not be able to get into the ECM mode.

@ahmara9875

2 жыл бұрын

Does this also means that I have to go to the dealer to get my options back? Or anyone having the Star diagnostics Module can also reinstate the system back to its original state?

I have also NTG 4.0 in my W212 12/2009, with navigation and I can also enter the hidden menu, but the engineering mode looks different, i can find also the Bluetooth audio but it's not checked and it's greyed out so i cannot change it, someone any ideas?

@kompane4662

2 жыл бұрын

This is for the Comand you have the normal 4.0 like me

What happens if you do a system reset on this menu

@killerhertzmercedes

2 жыл бұрын

puts it back to factory settings

I pressed the update and I think that after that, when opening the doors, the radio restarts! I don't know how to solve it! 😢

@SuperCollince

7 ай бұрын

Try to put off the items on MOST menu

Mine doesn't show that shows different only one page and says system, tel, radio, swdl, sound, emc measure, ext player. 2012 c300 4matic i wanna access camera menu

@killerhertzmercedes

2 жыл бұрын

Is yours an Audio20 or a COMAND?

@nicknick6960

2 жыл бұрын

@@killerhertzmercedes mine did not come from factory with camera and i have an android screen now

@killerhertzmercedes

2 жыл бұрын

@@nicknick6960 This video is for the COMAND NTG 4.0 system? not sure why you have replied to this video when you have a totally different system? Check the manual for your device. Regards

@nicknick6960

2 жыл бұрын

@@killerhertzmercedes i have the 4.0 ntg i know that

@killerhertzmercedes

2 жыл бұрын

@@nicknick6960 You previously said you had an Android

Can I change the sensitivity off the park distantie control with this?

@killerhertzmercedes

5 жыл бұрын

No afraid not.

How do I save the setting because it doesn’t get me an option

@killerhertzmercedes

2 жыл бұрын

change the option you want, then back up a screen and it will save it automatically.

@gyanpatel1179

2 жыл бұрын

@@killerhertzmercedes how do you rest all the settings

How can activate night vision in w212?

@killerhertzmercedes

Жыл бұрын

kzread.info/dash/bejne/hmWgpLGriK3YdNY.html&ab_channel=KillerHERTZMercedes

Hi, mine just looks complitely different…its SW build number is 16.500

@killerhertzmercedes

3 жыл бұрын

Is yours grey/red/white?

@Nick-wn3ys

3 жыл бұрын

@@killerhertzmercedes no, it looks just like the normal system with a few more options but nothing like yours…i mean i have much less options to choose feom

@Nick-wn3ys

3 жыл бұрын

I think it is a really old firmware so i think the first step would be an update? Is it possible at home or only in a dealership?

@chrisretro9380

2 жыл бұрын

@@Nick-wn3ys did you have any luck? I have the same problem

@Nick-wn3ys

2 жыл бұрын

@@chrisretro9380 did not have time to deal with it lately, but i think the only solution will be to take it to dealership

I have 2011 w218 cls and i didn't understand what did you say about the software updating is it good or not? And if i updated the software can i get back the old software?(the factory software)?

@killerhertzmercedes

2 жыл бұрын

Dont update the software, you need a dealership to do this!

@renqinescobar8115

2 жыл бұрын

@@killerhertzmercedes i have press it, now i cant get back. Every time says “ Error on Update” how can i cancel it?

Hi i cant enter the engineering mode can you help me?

@killerhertzmercedes

7 ай бұрын

What version NTG do you have?

How do you make it from yellow to black and grey

@killerhertzmercedes

2 жыл бұрын

You cant, they are different Firmware versions...

@daveorlando8031

2 жыл бұрын

@@killerhertzmercedes I just did it earlier tonight lol

@killerhertzmercedes

2 жыл бұрын

@@daveorlando8031 Please share with all

Can I activate bluetooth audio here?

@Rima-hh8db

5 жыл бұрын

HU Settings - HU Parameter (the following are the settings I put them in) (1) BT contact plate: Not Installed (2) LCT: Installed (3) BT audio: On (4) Audio Aux: Off (greyed out: not an option) (5) Video Aux: Off (6) Navi: installed (7) BT: on -back buttonx2 -pull command wheel down - system reset - reset - yes - go to audio, then go to the audio tab again to bring up the drop down menu of audio options, select BT audio and activating audio device comes up, then the audio streaming screen

@AYTAC-UK

5 жыл бұрын

@@Rima-hh8db hi i have E220 bluetec 2015 , when i press it doesnt go engineering mode, when i pres red phone button + 7+ 9 it goes dealer mode, please help me to get in engineering mode

Accesed then what? What you can do, nothing significant, right?

@killerhertzmercedes

3 жыл бұрын

See my other video on the reversing camera.

How would i bring up the engineering mode on a 2010 CL63 amg? I tried pressing the same buttons but it didn’t work.

I went in and tbh I feel like I'm a bit better than a complete newb but a lot of it was like double Dutch to me

@killerhertzmercedes

4 жыл бұрын

Alot of it is to me also!

@Bipolarvideos

4 жыл бұрын

@@killerhertzmercedes yeh I didn't understand most of it. Probs better to leave it before I blow something up

How can I drive and watch DVD at the same time ?

@killerhertzmercedes

5 жыл бұрын

You cannot as its illegal in virtually every country.

@elatab11

4 жыл бұрын

KillerHERTZ Mercedes Modifications yes you can stupid

Hi, how can i put de amg logo?

@killerhertzmercedes

Жыл бұрын

You can only do this on NTG1 systems, nothing newer :(

You don't know what you're doing do you?. 😅

@killerhertzmercedes

14 күн бұрын

???

@brucemacdougall772

14 күн бұрын

@killerhertzmercedes that video gave me absolutely no information whatsoever about what it does going into developer mode.

@killerhertzmercedes

14 күн бұрын

@@brucemacdougall772 The video is titled "How to access engineering mode". Clearly you have difficulty reading and understanding titles. You don't know what you're doing 🤣

@brucemacdougall772

14 күн бұрын

@killerhertzmercedes do you know how to get android auto without having to pay 300 to mercedes for the infotainment system?

@killerhertzmercedes

14 күн бұрын

@@brucemacdougall772 So you insult me, my channel, then ask for help? 😂😂😂

But it seems useless what can you do in engineering Mode nothing really I want to change the colors of my screen or have a different Logo Pop is that possible like those two things?

@killerhertzmercedes

Жыл бұрын

No you cant with any system.

Is it possible to add XM Satellite radio ?..

@killerhertzmercedes

5 ай бұрын

Afraid not...