Oh wow, didn't know that you could print tires in a rubber resin!!! That is awesome!!!! Thanks for sharing your knowledge!!!

The fact that I learned that I can export from one slicer to another, as you explained, made my day! Thanks!

Amazing. Loved every minute of this video. Thanks for sharing this process.

This is incredibly cool. I wish this kind of technology existed when I was a kid!

I loved the massive tire and wheel sets dropping from the sky towards the end. That was funny.

Very impressive. Nice video. Like the way you are honest about the products that you use, test…. Also looks like you are have fun. That’s the best part of any hobby. Thanks as always..

Wow, that's freakin' awesome!

Great vid, really enjoyed!! 👍👍👍👍👍

Great video! Nice wheels! Love that u can print rubber tires! Thanks for sharing

great video! thank you for sharing the process, it really is an amazing effort! 😍

New to 3D printing, really enjoyed your video mate, that ‘rubber’ resin broke my brain. Thank you.

I like the wheels you printed. More detail than the originals!

Love the wheels

Love your channel. Hoping to build a scale model one day.

Great video! I have been wanting to get a 3d printer for a while. I'm still not sure what to get, but now I have a better understanding of what I'm looking for. Thanks!

wow , This is a great device 👍 👍 👍

LOL i no nothing about 3d printing how ever love what they do! FUN!

The wheels and tyres you printed look great, I'd use them on the build.

Great work～

Beautiful wheels my friend cheers 🍻🍺KC Tasmania Australia 🇦🇺🇦🇺😎🤝👍

In Lychee, when adding supports to a symmetrical object, i.e. a circle, you can use Mirror and it will place a second support for you, cutting your support placing time by half.

Super gaaf zeg, ik wist niet dat je met zo veel details kon printen. En zelfs banden.

Man resin printers have come a long way from when I first took interest in them

Now you could create more rims, very nice stuff.

I've got the Formlabs Form 3 and absolutely love it. Pricey but well worth every penny if you build allot

@jonnylee1891

2 жыл бұрын

I got the Halot one last week and I 've addicted to its :D

very good

for the tires, I always wonder what's the main advantage to rubber vs paint , this goes for regular kits as well. I heard that rubber can change over time, whereas painted ones ( espoecially when protected with clearcoat) should likely stay the same never knew there was a rubber like resin, this is great to know and might be useful

Printed wheels is much better than stock :)

Soft like rubber resin for 3d printer? Now that is sexy! I so need one of these.

I need some of these tires.

I want to do exactly what you did in this video, except to a 1/64 scale. Also with thin white striped tires. Almost like the Cadillacs.

Whoa! Nice test! Thanks. I saw you recently tested Eleboo set, how do you find it after testing Creality one? Which one would you choose, as they are both at similar price range?

I just started using my anycubic Photon mono se printer I loving is so far but man o man its a completely different world from my filament printer.

@jonnylee1891

2 жыл бұрын

I do like Halot one, and the details of the model are great a lot, comparison to the filament .

One of my fears about buying a resin printer, is you could buy it, then find the LCD screen needs replacement, but the manufacturer has discontinued it, meaning you can't get it working again. While a resin 3D printer would be ideal for my plastic model kit making hobby (I generally build 1:25 scale car kits), an FDM would probably be used more for my RC hobby...

What kind of brushes do you use?

I put everything at a 45 degree angle and use chitubox for a slicer

@truantray

2 жыл бұрын

Chitubox is a much better slicer. But for wheels, flat is better than 45 degrees.

That is so cool I`m to old to learn how to use the 3D printing machines

@louissuguitan4858

2 жыл бұрын

And I’m too young to be able to afford them lol

@colossalbigfoot256

2 жыл бұрын

Damn I’m both..

Are you using Resione's recommended settings for the F69? I have tried to print a few prints without any luck using their recommended settings.

@TheScalemodelingChannel

2 жыл бұрын

Try longer cure times. Black resin lets the light penetrate at a much slower rate then other resins

Very impressive results. Too bad seems like resin 3d printing is a lot more of a hassle, though I guess that is the cost of getting such fine detail.

Nice video I just got an anycubic 4k it's awesome aswell I'll definitely use your mates cults I'm on that all the time I'll get some his stuff and try it out! I've got anycubic tough flexible resin on the way I'll try it with tyres! Alos use g lychee the free one but it's offered me the Pro for free now since used it for past 3 weeks so happy with that lol I noticed you managed to line the supports up from the centre hub how do you do that? That's what I've been wondering about if it had an alignment tool?

@TheScalemodelingChannel

Жыл бұрын

I just put the supports on manually. No tools sadly

надо срочно принтер покупать )

@sneakyfildy

2 жыл бұрын

Необходимость возиться с токсичной химией пугает если честно

Great vid mate, do u pour resin back in bottle after printing cheers Graham

@TheScalemodelingChannel

Жыл бұрын

I don’t, only if i need to change it to a different type of resin

Friends in high places ..lol

Great movie, unfortunately I can't afford that much Do you know any more tire design pages?

Great video thanks for sharing. I designed some rims in fusion 360 and printed them out on both my ender 3 and my voxelab resin printer, one thing I had was for some reason out of the resin printer they came out egg shape. I printed them out flat on the build plate, why did they egg shape on the sla printer vs the FDM printer, your thoughts?

@TheScalemodelingChannel

2 жыл бұрын

Not really sure, could be the settings. The resin. Room temp. All sorts of things

Thanks for the video~ do you mind share the exposure time and print setting for the F80 resin? I have having some problem printing it. Thanks

@TheScalemodelingChannel

Жыл бұрын

1:50 in this video are my settings kzread.info/dash/bejne/n6Knw86uk7Sfg5c.html

On the tires have you tried using rafts with supports? Maybe it's easier to clean up.

@TheScalemodelingChannel

2 жыл бұрын

The raft sticks. The tires fall off of the supports

How can you scale down the rims say if I wanted to do them for a 1/64

Great video, anyway have you make the rubbery tires for scale 64?

@TheScalemodelingChannel

11 ай бұрын

You can print any scale you want 😉

@1337FLINT.

11 ай бұрын

@@TheScalemodelingChannel Thanks for the reply, maybe i will try printing tires with tpu

What if we directly place rim to plate without supports? Only adding supports to inside supports?

@TheScalemodelingChannel

2 жыл бұрын

You run the change of cracking/breaking the rim piece which is stuck to the buildplate when removing it. If you use a flex plate it could be possible

i work with 1/64 1/50th scale wheels for cars trucks

could the inner edge be smoothed off using heat and teflon to stop the tyre sticking

@TheScalemodelingChannel

Жыл бұрын

You can sand an polish it

Hello friend, an incredible video. What app do you use to design those wheels?

@TheScalemodelingChannel

11 ай бұрын

I do not design anything. I buy these files

@ivisport7609

11 ай бұрын

@@TheScalemodelingChannel ooh! OK thanks

where can i get a wheel tire made?

What printer/slicer settings were required for printing the F69?

@TheScalemodelingChannel

2 жыл бұрын

I had it set at 0.025 layer height. And 2 seconds cure time. However, when the weather changed and therefore the room temp, i had mixed succes. I’ve heard that having a longer cure time works better for black resins.

@whizwhisnant

2 жыл бұрын

@@TheScalemodelingChannel Thanks for sharing technical details. I've found that many of the scale model 3d printers won't share knowledge because they're all about making money not sharing knowledge. Since I use my printer for personal use, I'll share as I learn.

How often do you change the alcohol in the cleaning station. Is it after each build or after a number of builds?

@TheScalemodelingChannel

Жыл бұрын

Can’t say exactly. I change it when prints are still dirty after cleaning. Or if they are still sticky after curing

@vwthga1

Жыл бұрын

Could I build a 1/12 scale postal truck? Would I have to do it in parts or as a whole?

@TheScalemodelingChannel

Жыл бұрын

@@vwthga1 that depends om the size printer you have. And how big your parts are

do you need that certain 3d printer to create rubber-like material like that tire? or you just need a certain liquid resin?

@TheScalemodelingChannel

Жыл бұрын

You need a resin printer and the specific rubber resin

@theopratama9047

Жыл бұрын

@@TheScalemodelingChannel thanks for the reply, just found out the rubber like resin is exist but it's way a lot more pricy than the regular one

Now it’s time to make some rubber tires for willy’s jeep.

There awsome i cannot use my 3D printer i havent a clue what to do yet but i do want to do wheels for models any files u can share stl files i have been to cults 3D page he does amazing work i need to learn to use it dedicate time to learning on my elegoo mars pro with the slicer chitubox build in i have not a clue what settings to set printer too for the printer to print and build/dry be cool to get a full video on what to set all the settings and sizes too to sstart printing and hope for the best im not tec savvy kills me i baught everything needed cant use it

Wait…are you going to apply this to the aventador you're working on?

@TheScalemodelingChannel

2 жыл бұрын

I’m thinking of a potential wheel swap, yes

watching your videos made me really want to get into this hobby but I have a doubt. is this 2k printer capable of making wheels for 1/64 ??

@TheScalemodelingChannel

Жыл бұрын

I think it can, but i would suggest 4k or 8k if your looking to buy

@VictorSilva-kg2hx

Жыл бұрын

@@TheScalemodelingChannel ty

HI! I'm struggling a lot with the leveling part, 7 out of 10 don´t get printed. Any advice for me? excuse my English. nice video!

@TheScalemodelingChannel

2 жыл бұрын

What are your settings?

Your compressor has an airflow of 17 liters/ min but on internet I see that the airflow of the airbrush that you are using is around 25 liters/min max. Is that a problem because I have a compressor that produces 20-23 liters/min and I am considering to also buy a mr hobby ps-290 but I don’t know if it will operate good enough?

@TheScalemodelingChannel

2 жыл бұрын

That is probably only the max working pressure there. It is suitable for a 0.6 nozzle max, and has a maximum capacity of 6 bars pressure. I spray at 2 bar. So am not even close to using the compressor to the max. Think it should be totaly fine. Mine is. So with your setup being even more capable i don’t see why it would not handle it.

@dndybuilds4116

2 жыл бұрын

OK, thanks for the reaction

its a resin dodge 4x4 front end with drive shaft transfer case shocks and leaf spring front axle tube

@TheScalemodelingChannel

Жыл бұрын

Please send me an email Info@thescalemodelingchannel.com

@waynewootton5385

Жыл бұрын

@@TheScalemodelingChannel 1 2/4 scalem.p.c.

Why didn’t you use automatic supports in Lychee?

@TheScalemodelingChannel

Жыл бұрын

Because i feel like they do not support in the spots i want supports to be. And sometimes its not enough

U switched printers? Which one u like better?

@TheScalemodelingChannel

2 жыл бұрын

I get new ones all the time to test and review ;)

The 3D printed wheels look better than the kit wheels. I am wondering about the costs of materials to create 4 wheels and tires - is it cost effective?

@ScaleHUBplasticmodels

2 жыл бұрын

This hobby is not cost effective at all, what a question :D

@TheScalemodelingChannel

2 жыл бұрын

If you print wheels and smaller parts all the time it is very cost effective

@truantray

2 жыл бұрын

About 4 cents a rim. Another 5 cents a tire.

Hello. These 3D printers do a great job. I bought a Doyusha Pontiac Firebird Trans Am 1:12 a long time ago. With this kit all lights, glazing and the complete wheels were missing. I never got spare parts from anywhere. I live in Germany. is there anyone who can 3D print the missing wheels for me?

@rutty2108

2 жыл бұрын

Hi there, I have a resin 3D printer and I would like to help you.

Could you print on the 1:64 scale wheels?

@TheScalemodelingChannel

7 ай бұрын

Yes

Is only the printer enough or do I also need the other machine?

@TheScalemodelingChannel

Жыл бұрын

You need a curing machine to cure the resin after printing. Or atleast a strong UV light. That makes it a lot easier with the machine. Same for the cleaning

Would anyone out there have the ability to make 1/18 scale Indy Car tires and Wheels of any year. (Mainly 70s to Now)

Do u sale for the people make rims with tires and disc's rotors breaks for 124 scale 125 scale 118 scale

How long does the liquid last? Like how much can I print?

@TheScalemodelingChannel

Жыл бұрын

That depends on what exactly you print and about 100 other things. There is an amount in the bottle. You can calculate in the slicer how much resin your prints roughly need.

@evaldasmaciokas4975

Жыл бұрын

@@TheScalemodelingChannel oh ok nice thank you! I actually just ordered a printer and the liquid. I’ll be printing small stuff for 1:64 scale. So I hope I can get a lot out of it

how about using the auto support function?

@TheScalemodelingChannel

2 жыл бұрын

That will put supports in places you don’t want them to be in, a lot of the time

Why having the wheels floating and add supports instead of having them flat on the bed, and just add supports to the center? Thanks.

@TheScalemodelingChannel

2 жыл бұрын

So the barrel of the wheel does not break when removing it from the buildplate

@frankzamudio4166

2 жыл бұрын

@@TheScalemodelingChannel I understand. Thanks so much.

This is awesome but you barely touch on the difficulty of printing with F69

How would the rims and tire turn out on a regular 3D printer?

@ZILLA....

2 жыл бұрын

Super low detailed and rough at best

@TheScalemodelingChannel

2 жыл бұрын

Not good to say the least

@EpsilonPrimeTransformers

2 жыл бұрын

It will not be as good as with resin but you can get decent results (well, maybe not with model kit standards) IF you know what you are doing (like adjusting the dimensions to what the printer can handle) You need to know some basic 3D tools though

@truantray

2 жыл бұрын

No.

I obviously have no idea what's happening. I don't understand how something is printed upside down in liquid. I'd love to make some stuff, but I'd never figure out how to do it

Yo dit zou echt nice zijn voor de mclaren f1 van lego ik will slicks hebben

Can I ask why you never printed these on a 45 Degree angle. Just asking no pun intended. Great how to vid. Thanks for sharing.

@TheScalemodelingChannel

4 ай бұрын

I prefer them at this angle. I see no benefit to 45

@LSCModels

4 ай бұрын

@@TheScalemodelingChannel I think I have to agree with you on this. Thanks Brother.

Could you please attach a link for your friends 3d model page. Thank you

@TheScalemodelingChannel

2 жыл бұрын

I did. In the video description

@jerb79

2 жыл бұрын

@@TheScalemodelingChannel yes you did I type it in wasn't getting anything.

@jerb79

2 жыл бұрын

@@TheScalemodelingChannel thank you I found his page appears I was miss spelling. Thank you again Like the vids

Can you print a set of wheels for a 1/12 Honda NSR500 1984 ? I am building a Spencer 1985 VF750F AMA Superbike replica that had the same wheels as the 1984 NSR500. I would need 2-3 sets and if so I will pay for it and shipping.

@TheScalemodelingChannel

Жыл бұрын

If there is a file available ready to print. Then yes. If not, then no

Se pueden hacer más pequeños para custom de hot wheels

@TheScalemodelingChannel

Жыл бұрын

Yes

@hzdam7344

Жыл бұрын

@@TheScalemodelingChannel 🥵 gracias mi estimado procederé a descargar los archivos

You seem to have a very large extra step in going from one software to another. Why not just import the model into Chitubix, slice and sent to the printer? You can add a printer and change parameters easily if your exact printer is not listed yet. The slicer you use looks simplistic, compared to Chitubox.

@TheScalemodelingChannel

2 жыл бұрын

You could indeed. But i was not able to figure out a working configuration

Do you need a computer to ua ethe 3d printer?

@TheScalemodelingChannel

Жыл бұрын

Yes

Remove the supports before the final cure, and that was isopropyl was far too dirty.

Põem legendas em português ? Sou brasileiro é sou seguidor do seu canal..

@TheScalemodelingChannel

2 жыл бұрын

It takes a bit of time for youtube to make them

Wonder vice compra is so

Do someone know the man who could print me a set of wheels in 1:43 scale for my model im building. Making a copy of my car and i cant find wheels.. I need someone to make them to me. I will be thankfull if someone can tell me who can me make them! :)

i like rims the brand showing momo in some area the machine make letter put make momo rims 5 finger

Do you know were a completely nood like me 😅 can buy these wheels/tires already printed? Change the wheels of my 1/18 and 24 scale models is a thing I want to do for a long time... I mean ho doesn't whan to put some creazy wheels w stretch tires in their models 😆😆 just like in Need for speed

@TheScalemodelingChannel

Жыл бұрын

Www.tsmc.shop

can you 3dprined some parts for me thank you wayne

@TheScalemodelingChannel

Жыл бұрын

You can send me an email, and we can discuss details Info@thescalemodelingchannel.com

@waynewootton5385

Жыл бұрын

i;m not looking for money just a couple of them you can all the money you want off it don't care

can you print some bodies please

@TheScalemodelingChannel

2 жыл бұрын

kzread.info/dash/bejne/mpOClceOd6fbZaQ.html

You might be able to make some extra cash if you would be willing to help guys with parts that they may need.

@mrb2917

Жыл бұрын

It's more hassle than it's worth

Not bad, but saw ugly artifacts on the spokes. If you want detail go for a Mono SE, or a 4K

i sent you my e-mail and see if your interest doing those 4x4dodge parts thank you please reply thank you

@TheScalemodelingChannel

Жыл бұрын

I did not receive an email from you

Please look at this comment. I will PAY YOU to make me certain tires and rims. I run a tire shop and I would absolutely love little props for my office.

@TheScalemodelingChannel

Жыл бұрын

Sure. No problem. Info@thescalemodelingchannel.com

come on resin si not suited at all for RC wheels did you even try to put the wheels on a RC car and run it ?

@TheScalemodelingChannel

2 жыл бұрын

Who said anything about RC?

@mrb2917

Жыл бұрын

@@TheScalemodelingChannel you have the patience of a saint lol, your comment section is full of some of the dumbest mfs on the planet lol. more power to you

For God's sake..just use Chitubox and auto support, it also auto distributes the individual parts of the print. Watching that was painful.

@SlowlysModels

2 жыл бұрын

Auto-supporting usually places the supports on the edge of spokes and hoops, meaning like 10x the cleanup and fitment issues. Which is more painful by far. Ask me how I know.

hi there mate try blackboxstl on cults great stuff