*Leave a comment or the rainbow boat will perish!*

@adamhasan7370

5 жыл бұрын

RCLifeOn noooo not the rainbow unicorn boat, plz make a dual jet boat

@compmojster

5 жыл бұрын

Liking your own comment. What a twat XD

@maltefokken523

5 жыл бұрын

Does the water cooling work ? 😂😂

@nobotty1451

5 жыл бұрын

You said that the PLA was getting soft. Could you not use a spray uv plastic coating over it? PLA loves to absorb moister. You may have to put it in the oven to dry it out.

@ROCKLEECR7

5 жыл бұрын

Please Review the Ender 5

The quality of your videos is just too good man. Helicopter sounds with the drone footage, who thinks of that?

@peterkennis6239

5 жыл бұрын

I like it two

@sparkles9868

5 жыл бұрын

Reminds me of some films (movies) i have seen were a car pulls away and you here the tyres screeching as tho they are loosing grip even tho the car is not going fast enough

@meckatzer4life739

5 жыл бұрын

Thumbs Up extra for this Helicopter Sound! And absolutey the Rest of the Video and All of your awesome awesome Videos Simon !!!

@modelnutty6503

5 жыл бұрын

the guy with the big props joke of course!

@austin3dprinting

5 жыл бұрын

I second that! Great videos Simon!

oof, that muted music

@jakecolam33

2 жыл бұрын

Ikr

"I got a tan. A lot of dreams came true today" - Yes more of this

Yes I liked the heli sound with the drone too. The best part was jumping in the water and transitioning to the boat taking off. You make good videos dude... Keep up the great work.

@nealthomson9505

4 жыл бұрын

The helicopter sound is top shelf. I agree:)

Try making a tapered jet nozzle (thrust vectoring) to ensure u have a bit more pressure/ force to move the boat faster

@blackpete

5 жыл бұрын

Submerging it a little deeper could help.

@derekbarrineau8519

5 жыл бұрын

Exactly. Print a few nozzles with different diameters to find what works best for your boat. Larger nozzle = more low end power & a smaller nozzle = more high end power. You will need to find the right balance. Once you find the right diameter nozzle then move the top mounting hole position until you find the right trim angle. You could even use another servo for trim and tie it to the throttle channel with a curve /mix ( as throttle goes up the nozzle will pitch up). This will reduce drag on the hull by lifting the nose.

@maxpower700

5 жыл бұрын

Smaller jet system overall i would say. Look at something like the brinksman jetboats, they have tiiiiny propulsionsystems, and goes like crazy 😃

@sicklad3277

5 жыл бұрын

That silly big nozzle has been bothering me since the first jet boat he made, narrowing the nozzle will increase the speed at which the water leaves the nozzle and will 100% make it a faster boat

@modelnutty6503

5 жыл бұрын

yup! the fast electric jet boats use about 24-25 mm nozzle and 30-32 mm impeller. I like this guy's enthusiasm, but homework is needed!

“Wanna see a rainbow unicorn horn go 100 mph?!” Hobbyking: “TAKE OUR STUFF” 😂😂

@AndyCallaway

5 жыл бұрын

Lol. "Shut up and take my money!"

@V843v3r

5 жыл бұрын

And endup going 40 mph.......

@V843v3r

5 жыл бұрын

Hobbyking: give our shit back you liar

@bennieleip579

5 жыл бұрын

rev headz if you can't deliver than don't say it

@chehsin

5 жыл бұрын

yeah, i hope HK never sponsor him again

reduce the impeller/pickup diameter, or install a smaller diameter nozzle your looking to produce a JET of high speed water, not a flood of mid speed water. Also it wont plane because it is literally carrying like 3 lbs of water in your large diameter turbine assy.

@OnceShy_TwiceBitten

5 жыл бұрын

yup bernoulli's principle

@stephenkamin1345

5 жыл бұрын

Your also not planing because your vacuuming the boat down with the turbine tunnel... the front of the tunnel should point forward... go turn a jet ski over and have a look.

@AB-80X

5 жыл бұрын

@@stephenkamin1345 There's no turbine anywhere in this boat. There's an impeller driven by an electric motor.

@ionutalex7347

4 жыл бұрын

@@AB-80X there could be tho

Love your work! I've watched your stuff for over a year now and gone through all your old stuff too. Great filming, editing and projects! Your uploads are better quality and have more interesting content than anything on TV these days.

I got to say that it’s really cool how much effort an creativity you put in your videos, just go on with that. Like it👍🏼👍🏼

Pls make a electric surfboard. It would be awsome 💪 (i've already tried something like this)

@PlaneAwesome

5 жыл бұрын

This. I'm working towards a jet surfboard, starting with my kayak.

@grantlesueur

5 жыл бұрын

Or an electric hydrofoil board. Let’s set the bar high...no pun intended

@modelnutty6503

5 жыл бұрын

robotmarketplace-dot-com has 24v 2.1hp motor about 110 dollars US. with a 2:1 gear reduction and aluminum propeller from YoungProp-dot-com (submerse props for trolling motors) you CAN build a surfboard or hydrofoil to get up to planing speeds. for a kayak a 300w electric scooter motor is actually plenty, running just 12v. use 5/16" shaft is a perfect fit inside 3/8" hard brake line tubing, perfect and inexpensive!

@LsxPlayer

5 жыл бұрын

I subscribe this ideia :)

@Eden_M

5 жыл бұрын

@@modelnutty6503 Or google eFoil Builders forum and see how it's done correctly...

always great content, videography, and love the wardrobe!! keep up the great work! Russ from Ocala, Florida, USA

My favorite shot 9:03 👌

@mrmano8

3 жыл бұрын

that is a nice shot

Make a small submarine It will be awesome...!!

You should make one with dual jets

@stefandanielsen4683

5 жыл бұрын

Heck ya

@timogrettenberger4455

5 жыл бұрын

Make it like the real speedboats. Quintuple jets. Just put as many in as possible.

@adamhasan7370

5 жыл бұрын

Yaaaa omg that would be amazing

@Eden_M

5 жыл бұрын

Check my channel, not the best quality vid but you'll get the gist

"The Pride of Sweeden" Awesome video Simon ! Keep up the great work. With love from Canada 🍻

You’re my latest “discovery” attended by KZread to watch. Man this is pure and funny. I like the projects, the humor, the fails and the good results, the good movie quality, your English. Should I go on? I think your movies are far under valued and you deserve mutch more views. Go for it, Simon!

I liked that you included all the failures. Their not really failures just the evolution of a build. Good as always.

@modelnutty6503

5 жыл бұрын

yes, but more homework/research would be more successes!!

My favorite part was the little "bloop" when you cannonballed into the water. Made me laugh out loud, lol.

@ctvxl

5 жыл бұрын

Yes, that was the best part for me also :)

That was awesome man!!!!! What about a submarine 🤯, it would be breathtaking 😂😂

Probably the fastest and simplest rc boat that i have seen on KZread yet Simple and supper fast. Great work.

Cool project, fun coments and a really nice editing job. Even desent english, witch made it a bit more interesting when i saw your location, i live 8km away.. Keep up the good work!

I clicked this video by accident, then got hooked. Great video. +1 sub

This guy editing just blows my MIND

Thanks for the video. Big fan of your projects. Keep on going!

You got a Scandinavian Tan, also known to the rest of the world as a sun burn, haha! Jk, much love from Norway~

I think that you should have used the positive pressure side of the thrust system to cool the motor :) A small tap pressed though the side of the turbine housing, just like you did with the bottom, would have done wonders!

@modelnutty6503

5 жыл бұрын

yes, my water pickup for surface drive props are behind the top tip of propeller, what would be part of the rooster-tail is forced into the tubing without causing drag on the hull bottom. edit: near impossible for it to get clogged too.

@Skyprince27

5 жыл бұрын

@Cambpictures Exactly, that’s what I was thinking… You match the size of the orifice of the tap, so that it provides the right amount of cooling for the motor.

@littlehadsell

5 жыл бұрын

+1. exactly what i was thinking

@snikwahjets

5 жыл бұрын

Cambpictures agreed

That was fun I like the way you edit your videos Looks like you put a lot of time into it. Great job

love seeing this from the start and then for it to work all in the end and how you fixed all the major issues

9:04 nice transition man if I could like twice I would for that

@RCLifeOn love your process of working through issues. Great video as always!

Amazing editing! Thank you for sharing your maker's endeavours. My first RC experience have been FPV multirotors but RC boats look like a lot of fun (in summer at least).

video quality and your humour is on point.

Use the Same Motor but make a Hydrofoil Boat Instead!!!😁👍🏻

AMAZING! Very well done! I've got very encouraged watching your project. Thank you very much. George

OMGosh, Simon, the sound effects were cracking me up. The "blurp!" over your cannonball into the lake, and the helicopter for the drone footage! Excellent. Glad the Hobby King motor and battery upgrade were a success.

On the jet pump on the nozzle you need to do a taper and make it smaller at the tip it will go so much faster

@snikwahjets

5 жыл бұрын

Yeah about 30% reduction in diameter would help heaps More curved stator vanes would lots too. Nice video though

@ctvxl

5 жыл бұрын

yes, you are moving way more water volume than you need! Making the nozzle taper to a smaller opening will increase the velocity of the water a great deal. There is a happy medium between volume and velocity of water that is most efficient. For your setup, it's going to be quite a bit smaller opening with a longish taper. Probably 1/2 the opening output size you have now I would guess...

@stephenkamin1345

5 жыл бұрын

It’s called a venturi

@fdkrew

4 жыл бұрын

snikwahjets I was thinking the same thing after I saw the video. Might be worth making a video on this experiment.

Hi, With your nozzle how much are you compressing the water after the impeller? Also the steering nozzle should taper down to compress the existing water. With my hamilton jet boat with a hamilton 773 jet unit has a Scott tilt steering nozzle which can tune be fitting different inserts into steering nozzle which changes the nozzle diameter. As someone else said take cooling water out after the impeller.

I'm so impressed by your ability to drive an RC boat while simultaneously following it with a drone. Or how you get a tracking shot while driving the boat! Great video man!

I love it when you talk swedish! Makes me want to see more of your beautiful country, I've only been to Stockholm. Keep up the great work, it's always a pleasure to watch your enthusiastic soul produce awesome content

nice boat! now make it jet powered! :D

Electric jet skiis seem to have faster acceleration than gas models. I think that you should design a mini jet ski that you can ride and double your power with two motors.

The best part of your videos are the extra sounds.. Helicopter drone and jumping into the lake with the water drop.. You deserve all the popularity you get. Definitely one of my favorite channels on youtube and now I have a 3d printer to start making my own rc toys.

You know, sometimes we just watch and like it. Nice to show us where it gets stuck in this wonderful hobby.

Haha!! "... å jag fick en bränna. Många drömmar gick i uppfyllelse!" Garvade högt. Hittade precis hit till din kanal. Kul! Kör hårt.

Hydrofoil? Go on, you know you want to! Well at least I want to see it and can't be bothered to build it. :-)

I thought you did great lt is amazing to me what bright minds are capable of KEEP UP THE GOOD WORK THANK YOU

I dont understand how anybody could possibly dislike this video. This is high quality content. You Sir, are going to be an awesome engineer! Greetings, an engineer.

I think you should 3D print an electric skateboard

I am freaking out about your project. It is just beautiful and gorgeous . Build a rc boat is one of my goals in life. But how did you design and create the hull. With a pc Programm and a 3D printer?? In this case, which one??

@FluePeak

4 жыл бұрын

Just search for 3d program for printers and you will find lots or buy an printer first and the use the asociated program or even Maya 3d desk

These videos always amaze me, wish I could have a life as easy going and chill as yours, keep up with the great videos!

Huge tip, move the inlet for the cooling to sit above the prop, then there is always water flow under good pressure

@AndyPue

4 жыл бұрын

I thought exactly the same. Would even adjust the cooling flow proportional to the throttle. =)

Wish One day I will also get that motor and make this project. 🌈🚤

Nice boat! can you make some kind of 4x4 all terrain rc car with an arduino or a raspberry pi? You could even make it so it could drive when it flips by giving it bigger wheels

Love the creativity of all your shots and extra footage.

I hope HobbyKing supports future projects. I real appreciate your ingenuity with electronics

Did you make that Pontoon Barge aka SS Duct-tape? I Al.most forgot the main comment... If you would decrease the output size of the jet nozzle by half it will accelerate the water much faster. Also seal the part where that water is leaking and shooting up. making a new nozzle will easily give you 2x the speed.

@stephenkamin1345

5 жыл бұрын

You did not need to seal it... you should have designed in a coupler... press fit...

the 360 footage with the camera in the back looks really good! Did the watercooling system worked?

@akselanthonisenribe9984

5 жыл бұрын

From his slow-motion footage, it did not seem like there was much to any coming out from the side sadly.

@ddegn

5 жыл бұрын

I'm surprised how good the 360 stuff looks. I'm tempted to get one of those cameras myself.

The effort and amount of work that has been put into this video is absolutely ridiculous. Much appreciated

Your videos are such an inspiration, the amount of work you put into them is absolutely amazing!! Keep up the good work!

Hey I think you should try and make the outlet smaller. More thrust

@ritzevespa

4 жыл бұрын

Jep

"I got a tan, a lot of dreams coming true today". I from Brasil, get a tan is a January's Tuesday!

@nyanisnothot4176

5 жыл бұрын

Caio Callor In the Philippines you'll get a tan every fucking day mate

Well done, quality presentation and the boat was helpful for a project I am doing currently. Take Care - Australia, Melbourne

That was awesome. Always enjoy watching your videos and your easy going vibe. Great solution to the oriinal problem and great comeback for the repairs. Would love to see you polish out some of the minor issues (seal the rear water jet port) as I am sure this will increase the efficiency and therefore performance of the boat. *Loved the copter sounds with the drone clip too, awesome!!!

Is it possible tooo? 1.) make it autonomous 2.) put a radar on it I’m thinking of an autonomous fish finding r/c boat the that can also map the water.

5:03 G E T I N T H E B O A T

I just love the way you narrate your videos. Looks like you have sound construction. Your speed is a matter of an effective propulsion solution. Great scientific built!!

Simon, keep up the great work!! Your video editing skills have gotten sensationally better since I started watching your videos!!

Ive never been this early Maybe becuz im visiting Sweden and closer to the god

Could you do a video on a giant RC Benchy boat!? 😂

Props on the editing dude. I appreciate the amount of work that went into this video!

Just an absolutely amazing video! Thank you Simon!

The top of the boat reminds me of germany :)

@julian5857

4 жыл бұрын

Why do you have half of the ss sing in your name

@aim2go975

4 жыл бұрын

Skiller5000 this isnt the ss sign wtf 😂

@aim2go975

4 жыл бұрын

Skiller5000 fuck, this really is, it was never meant to be that, it should be a lightning

#notificationsquad

Makes me want to design a rc boat, awesome video. Good catch

That’s a nice looking fish! You’re editing skillz r above reproach.

Keep scrolling. Just a regular comment.

Wow you have great knowledge on these I'm just starting out got the 3D printer what a cool hobby

Hey i am getting into the hobby too, you are an inspiratin to me. Tanks! Awesome camera transitions btw!

you got one of the best video transitions i ever seen on KZread. the helicopter is so clever btw. well done

Grymt jobb! Jävligt coola "transitions" och roliga kameravinklar! :)

Getting my first 3D printer tomorrow can't wait to start printing. Thanks Simon for learning some things about which printer to get. Creality Ender 3

Awesome video. Awesome quality. Absolute bench mark when it comes to these building videos. I ll try to come somewhat close to you in my videos within the next years.

I was a long time RC helicopter guy until i had my son. Now he’s old enough to get into RC stuff with me, so im excited to dust off the hobby room equipment. I have decided helicopters are too time consuming and you have inspired me to do drones and oddball type projects like these. The hobby takes on a whole new dimension with 3d printers, we have a Prusa mk3 that should be more then capable of printing frames and other stuff. I have years of high end RC work gear, soldering stations, fabrication parts like carbon fiber, containers of connectors, servos, bl motors, speed controllers, etc. thanks for your wonderful videos showing how far the hobby has c0me

I always enjoy watching your videos. Keep them coming. Thanks.

Awesome video man. I love the 3D printed RC stuff - so much fun.

Damn that was a lot of fun, thanks for sharing!

keep up the good work! nice transitions on the video!

Gratulerar !!! Great workmanship, Great video !!! Very entertaining commentary. (I also enjoyed the scenic views. Your country is beautiful... )

I like the editing on this one! Got a few chuckles 😄

You make very good videos! Cool boat too! Thank you for sharing

Love your videos. Amazing production quality! Keep up the great work!

Thanks for your video's dude! You have one creative, crazy mind, which we all enjoy! Love the Swedish anekdotes too.

Always love watching your projects, you inspired me to get a 3d printer and start making stuff.

Great video and i really like your creative editing. Top notch 👍

That was great! Now let's see the dual-motor design!

Man, that boat was on a roll. Rainbow oat in blue sky. Amazing. Keep it up.

Super cool. I really like some of the unique ways you capture video. A possible solution to the leaky rear would be have a recessed circular groove that you could put an O ring in. Keep up the good work!

Il really appreciate your videos and all those crazy projects ! Keep on going, your footage are great ♥️😃🌈

Absolutely love it.. I would love to come and chase some boats in that lake! I wish I had the tech to make videos like that!!!! Keep up the good work.