Thank you very much for the explanation. I couldn't figure out why my firearm was not functioning. This video just saved my duck hunt.

Hope the hunt goes well. Thanks for watching.

谢谢！祝您快乐！

Nice video. Thanks.

@Stray03

7 жыл бұрын

Thanks for watching.

i dig that fine metal trigger guard.....dont know why Remington opted for plastic trigger guards now..

@Stray03

8 жыл бұрын

I didn't know they switched over, I guess like the 500's they are cheaper to make, and lighter. Thanks for watching.

@yourangerfuelsme

2 жыл бұрын

Polymer of a handgun is plastic. they drop and work fine. This isn't your basic injection molded plastic... I've dropped my 870 on the plastic trigger guard from 5 feet and it's fine.

Do you know how often you should clean and lubercate the trigger mechanism? I just got a new 870 wingmaster and have heard a lot of conflicting information on how often you should do this.

@Stray03

8 жыл бұрын

+sporedt Depends on what you do with it. Most people will never have to re lube it if new. If you treat it badly (bad weather dusty conditions, keep it in the dirt mud snow, heavy rain etc) then when you get home it should be opened and cleaned/lubricated. I personally have only lubricated it when I took it apart to clean when I bought it second hand. Never bothered to afterwards. It is about common sense, not a general rule. If it feels off or if you have been mistreating the gun do an inspection and lubricate when you put it back together.

@sporedt

8 жыл бұрын

Thanks, I appreciate it

Well done, thank you. I was interested in what if any benefit or con would result from the replacement of the stock hammer spring with a Wolff extra power spring ? Do you have any maintenance or improvement hacks to share ?

@Stray03

6 ай бұрын

Unfortunately no. I don't get fancy with my firearms usually. Keep them stock, avoids picking up extra issues. Should be plenty of channels dealing with 870 mods though.

@dennisthornton4384

6 ай бұрын

Understand perfectly. I have had an 870 Special Purpose Magnum for many years. I added a Remington made extended 2 shot magazine tube which I found in my parts box. the gun came with a 12ga. open choked (not a screw in) deer barrel with rifle sights so no need to fix those. Recently I decided to do some basic upgrades like a reliable magazine tube follower, better quality more power spring, larger safety button, and do a general trigger clean and tune up. Good luck and good hunting.

@Stray03

6 ай бұрын

@dennisthornton4384 that is really the only thing I have done to 870s also. The extension and turning them into specific classic versions, like the police version with folding stock.

Do you have a video to put a trigger group back together. I disassembled mine and I’m stuck. Also do you recommend after market parts to upgrade the trigger group

@Stray03

Жыл бұрын

Don't think I ever made one. I'm a traditionalist when it comes to fixing the shotguns. If you think you would be better off with aftermarket go for it. You have to shoot the firearm.

@abc456f

Жыл бұрын

I was going to replace the dog carrier spring after I switched out the safety for a Wilson Combat large safety. In the process the sear spring came off and I was lost. I then mistook the sear spring for the dog carrier spring. Was ready to just give up and bring it to my gunsmith. But my nature is to not give up, so I dug through KZread videos and somehow got the trigger assembly put back together correctly. Wish I had seen this video, it would have made the job easier. But I was very proud of myself nevertheless. I left the original dog carrier spring in. I had asked my gunsmith if it was a good idea and he told me if I'm not having any issues, which I'm not, it could end up causing problems.

Great detailed video. I have two questions: 1. Do you recommend switching out the stock dog carrier spring for the more heavy duty spring that comes in the police and 1170 models? I have the magpul tactical express. 2. Is it a good idea to pull the trigger to release the tension on the hammer spring when storing the gun? Thanks in advance.

@Stray03

Жыл бұрын

Not the right person to ask. I keep everything stock on my guns because I don't need them for protection or competition. As such I can't really give you a good opinion. As for storing uncocked, I don't specifically try. I guess if you are storing it for long periods of time it is better for it, but if the springs are designed properly then I don't see it as anything too important to do

@abc456f

Жыл бұрын

@@Stray03 Thanks for the quick reply.

感谢您的收看，我只是解释如何触发作品，我觉得你可以看到它是如何理解的语言，甚至没有工作，我希望至少，如果您有任何疑问，请询问。我将尝试使用谷歌翻译解释，但我不相信的术语翻译。

After I fire a shot, the bolt gets stuck half racked. Any idea how to fix it?

@Stray03

2 жыл бұрын

On pump open or on close? So before or after shell ejection?

Today my 870 trigger just squished back without firing. I took it home and the trigger group would work/fire out of the gun and would also release the hammer with the trigger group installed in the receiver but with no barrel installed. When I install a barrel, the squishy, non-functional trigger returns (I tried this with two barrels). Any ideas of what's wrong?

@Stray03

Жыл бұрын

I'd say your breach open safety is working. Is your pump locking or is it able to slide back?

@herknorth8691

Жыл бұрын

@@Stray03 not locking. The pump moves freely.

@Stray03

Жыл бұрын

@@herknorth8691 That is the problem, something is keeping it from locking, I know not much help but check that part and what is interacting with it in the gun.

@herknorth8691

Жыл бұрын

@@Stray03 the threaded ring that holds on the handguard seems to have been the problem, it was loose and now that I tightened it it's fine.

@Stray03

Жыл бұрын

@@herknorth8691 I'm Glad it wasn't a bigger problem than that.

你的视频拍的灯光和角度非常好！我虽然听不懂，但是，我看的非常清楚！ 希望你多拍一些好的gun Trigger works Disassembly and assembly 视频，我们在国内没有机会看到，O(∩_∩)O谢谢！我用的是翻译软件，可以大概看懂你的文字。

i pulled the trigger when i took out the assembly, how bad is that?

@Stray03

4 жыл бұрын

It should be fine. Just don't do it too often.

@cocacolabob

4 жыл бұрын

@@Stray03 cool thanks man. just wanted to see how it works and then got worried after lol

can you do A Remington 1100

@Stray03

8 жыл бұрын

+Donald Baker If I get one. never took one apart but aren't they pretty much the same trigger system with a few mods?

Can you make it slam fire

@Stray03

4 жыл бұрын

Always a way, but probably make it dangerous since it wasn't designed that way.

Probably didn't translate properly sorry...