No one: KZread: wanna hear a truck start really fast?

@big_johnward

4 жыл бұрын

Lol obviously I do!!

I can confirm this. My 02 has the same starter you have. As soon as I turn my key, starts on a dime. Even my dad wishes his 2000 can start as fast as mine.

@tylerdavis288

2 жыл бұрын

I have that same starter and mine struggles a bit, kinda surges especially when cold. Wonder if I should check my batteries and connection cables

@jefflancaster6587

2 жыл бұрын

@@tylerdavis288 yea I'd check the battery cables and connections. Battery cable can looks really good on the outside and have rusty and rotten wiring inside. Also have the batteries load tested first.

@tylerdavis288

2 жыл бұрын

@@jefflancaster6587 my local shop said it's a big old Ford and with it being roughly 20 degrees here most days, he said that's normal. I will add a word of caution. I started it the other day and heard a horrible metallic scrape sound, found out the top bolt of my starter had shaken loose and fallen out and the bottom was loose. Check your bolts every time you check the oil

@rodmacd8229

2 жыл бұрын

@@tylerdavis288 maybe add some lockouts or use locktite?

Glad to see you back. Looks like your having fun again.

Mechanic : what size you need ? Zach : bout the size of the miller light .... Yea bout the size of can a beer Mechanic: say no more

@cloverleafH713

2 жыл бұрын

🤣

Comforting video my 03 7.3 starter dumped last week.. Went to O'Reilly's. Got the Ultima.. new one.. because I needed it same day. Installed it.. it's starting my truck fast.. I'm liking it.. Such as easy install.. if it only last as year. Then I'll just go to the closest O'Reilly's and say swap in the spot.. very happy with it.. so many Denso recs..

I made a few videos on the 7.3 service truck I had and I got the same comments every time I started it. People just wouldnt believe it was because good batteries, cables, and starter.

This is America!!! *Chinese made impact wrench*

@Zach_A

4 жыл бұрын

Nobody makes battery impacts anywhere other than china. Even tool truck brands are made there.

@glengarcia2739

4 жыл бұрын

Zachary Adams wait till he find out where the majority of his trucks part were produced. Assembled in america, supplied by everywhere else

@bryanmartinez6600

4 жыл бұрын

@@Zach_A I think Ingersoll Rand still makes some models in the US however I'm not exactly sure if it's MADE IN USA or Assembled in USA which is most of DeWalt stuff bragging about their "American" tools. I still prefer Makita or Milwaukee.

@bolt2510

3 жыл бұрын

@@Zach_A Makita is made in japan

Thanks for all the 7.3 info brother.

Nice trucks. I once had a 6.0 starting this fast...after I sprayed some ether in the intake 😆 Had a dummy plug o ring leak and it wouldn’t start without it lol

Seen you at Cletus and cars Houston man. Awesome truck looks amazing in person

High speed starter gets the the high presure oil pump to 800 psi so it can start faster. It only uses 2 bolts instead of 3 like the stocker.

The humor is off the charts this go round 😂😂😂

Is it because the engine is worn out and has no compression?

@abramspearman9046

4 жыл бұрын

Dan Stennis it’s generally batteries but sometimes an injector’s return line can go bad and lose prime and then it will have a hard time starting.

@2strokemikey11

4 жыл бұрын

Dan Stennis low compression would make for harder starts less restince doesn't mean its gunna start eaiser

@ilikeboost4764

4 жыл бұрын

A skip would make a sound but if it was just worn out evenly it wouldn’t.

@alimvinca2998

4 жыл бұрын

Beat me to it.

8:20

Just put this starter in today, so badass. The manufacturer on Oreiley is a variation of denso.

My 6bt is the same. Even in the cold. First crank except when it's around 30 degrees once it does start takes a little for it to reach idle it puffs and puffs

This dude sounds stoned and I LOVE IT.

"This is America" 😂🙌🏼 love the videos brother!!

I'm glad I ran into your channel. Beautiful. When and if I need batteries I will step up to a new non-refurbished battery because all batteries are refurbished but not Odyssey.

WHAT COLD CRANKING ARE THOSE BATTERIES? I LIKE THOSE BRAIDED LINES TOO.

Man, a good sounding starter Just ooof adds the cherry on top

I really like your cables what did you use for the cable covers

Those battery cables cleannn 👍🏼

I know it's old vdo but just curious how is that starter still working for u. Did u had to change it after these yrs or still going strong coz mines about to go out? Please let me know whenever u get a chance. Thanks 👍

I put the new big boy starter in my 02 and it was fight to get that big mother in. Time to make some new cables and buy those Odyssey batteries!!

Hmm I replaced my stock one when it broke with a regular input shaft and it starts right up with no problem. Even this past winter cranking in the cold for a few never seemed to slow down. But I’ll keep it in mind when it goes

I believe those big ones came on the older 7.3 IDI trucks but that are awesome!

love this video! hahahaha!! thanks for sharing!

It sure cured my cold morning starts !

Holy shoot that truck starts good. Wish my truck started that good.

And I thought she was starter fluid injected 😂

Can you send me a link or where you found those cables for your custom battery terminals i want to do something similar

Where did you procure those terminals and the wire? I need to make new ones for my truck.

Ok good video. The used 01 350 7.3 i just bought had brand new Duralast Gold 850cca batteries with a 09/21..date..they have never turned the starter over like i would like to hear it. No corrosion on the hefty new cables. I'll load test them this week before i try a new heavier starter. To bad i don't have the receipts for these 6 month old Autozone Batts.

Next starter for sure

Appreciate your humor 😅 hawaii

I have a mean green for 1 year now, it spins so fast that I’m scared it might break the fly wheel

You made some sick cables there

I have a smaller 7.3 starter laying around and an older bigger one on my 7.3 and also a 6.7 starter, I wanna see if I can Mickey Mouse the 6.7 starter to fit my 7.3 I’m curious the effect it will have

@DashcamMania1

4 жыл бұрын

There are ways to put the 6.7 starter on the 7.3, I think you just change nosecone.

😂 a buddy of mine had a 7.3 great truck but he was always plugging it in to get er started

Bought a NAPA Denso gear reduction and it lasted 12 months. Of course it went out on vacation. Luckily a little whack with a hammer and it started up. Had to do that twice on the trip.

What do you recommend for the 6.0🤔

That is 1 bad ass starter

Holy shit man, how many starters have you gone through?

I'm a gas guy but damn many gas engines dont start that easy

@Socialassraptor112

4 жыл бұрын

TheBegoing idk man mine starts after a few cranks 😂 and she 20 years old

Got the same starter for $125 on Amazon. DB Electrical. Had it since 2020.

Damn, how did that start so fast??

Where did you get those battery and alternator and starter cables. Nice truck you got there

@zacharymcfarlin1270

4 жыл бұрын

i made all the cables myself. the alternator is off a OBS ambulance 240 amp alternator

First time watcher but, did you modify / hack the stock dash cluster and install it into the more modern dash assembly 🤔. That is a dang good idea and doable with enough effort maybe. Laminate question, that is not the interior of a 7.3

@dax313xab

Жыл бұрын

Sorry dude, I just checked out your channel! Definitely going to watch and learn a little.

These starters get the job done PERIOD !!

Hey bro , Will 2008 front panels hood grill and doors fit on a 2006 king ranch 350? , and why is my KR 2006 fully loaded but has no blowers in the center console for the rear passengers?

Where did you get the battery cables?

You have a very strong personality. Have you always been like that

Yea buddy!! Where you u get your battery cables and clamps?

@zacharymcfarlin1270

4 жыл бұрын

FixItNick amazon. Look up fastronix

@FixItNick

4 жыл бұрын

Zachary McFarlin will do

@BatiBat0o

3 жыл бұрын

@@zacharymcfarlin1270 You got the terminals and cables from them? Just bought an 00 7.3l and looking into swapping them cables. 45 colt starter is already there

Did you change the dash out?

Every ford needs that starter

Where did you get those cables?!

Thats badass

did you try the x2 power agms?

Where did u get the link bushing from?

Where’d you get the battery cables?

Bought this starter today because I watched this. Was a bitch to get the old one out because they put the 3rd bolt way up in the middle of no where but got the new one in in less than 10 minutes

i prefer commercial truck batteries from napa, with stud terminals, i hate those stupid post type terminals. 125$ per battery aint bad either

Hey brother just came across your video do you make battery cables? I own a obs 7.3 and my positive battery cables are absolutely thrash.

@danielesparza3530

2 жыл бұрын

Im looking for some as well

@jamesstuart3238

6 ай бұрын

@@danielesparza3530I make them if you need a set

Damn that thing spins fast as hell , too bad it didn't do that from the factory !

5:35 this is America 🙏🏼 🇺🇸

The late model 7.3 came with a better gear reduction starter. My 2003 has one. Fires up insanely good. If you have a early model 7.3 upgrading to the later starter is cake.

@hondaxl250k0

Жыл бұрын

I have a 97. Any idea if I have the old or new style?

@MitchJohnson0110

Жыл бұрын

@@hondaxl250k0 you'll be able to tell by how fast it cranks over. i never have to crank my engine for more than 2 seconds.

Where you get those cable ends

Man has quality parts

So, does this 2001 7.3 have the interior out of the black 15 lifted 6.7 you had in one of your videos?

@zacharymcfarlin1270

4 жыл бұрын

Repo ManND they have the exact same Interiors but no the 7.3 did not get its interior from my 6.7

@RepoManInIndy

4 жыл бұрын

@@zacharymcfarlin1270 I have watched a few of your videos and you are no doubt very talented when it comes to these trucks.. I almost bought a 16 F550 wrecker that had the 6.7.. it had caught fire under the hood and I had a 7.3 I wanted to put in it. I've always loved the 6.7 I currently have, it's got 307k and still going strong but I think the 7.3 is the best diesel engine ever made. I was glad to find ur channel cuz it let me know I'm not alone in thinking the 08 to 16 interiors are the shit.

Hmm 🤔 I always wondered if changing my starter would change the way my truck starts

My 7.3 starts slow but I’ve got decent batteries so I’m going to buy that starter and see what happens 👍🏼

Need this for my 7.3l

Will that work on a 6.0?

I got an Ultima on my 6.4 and it’s 👍🏻

My Napa starter was legit. Never used an oreileys cause they arnt local much.

I got the same starter . Bust my 7.3 with no effort

Where can I get battery cables like that?

@thenewlife.pt2724

3 жыл бұрын

Xdp makes them for about $340 check full force diesel if anything

Well my reason is to go for that starter is because it's easier on the batteries for if you need to use glow plugs to warm up the engine to start easier in the mornings and it also the starter will pump oil faster into the injectors for a can help it push the fuel into the combustion chamber to help startup faster

I have a zf6 6 speed Transmission im going see will it work

You got a new sub today fu,#$ ford ay

This vid was posted 2 weeks ago and KZread just now randomly threw it into everyone’s recommended vids *i ain’t complaining tho*

Can you provide a link for the cables and terminals ? I found the starter but not the cable and terminals or do they come with the oddessy batteries ?

@zacharymcfarlin1270

4 жыл бұрын

I hand made the cables

@mikewolfskhal8782

4 жыл бұрын

Zachary McFarlin damn well that’s badass lol

Bring that truck to northern Canada in the winter when its -40 and then see how fast it starts.

what tires are you planning on gettin for the 7.3

@zacharymcfarlin1270

4 жыл бұрын

oce nitro trail grapplers 40x15.5r20

@colton7373

4 жыл бұрын

Zachary McFarlin yay

I’m cracking up I’ve got the same truck… same starter.. and same first and last name just spelt with “land” at the end

Where did you order your battery cable from?

@nickfritz1

4 жыл бұрын

Josh Stanley a store

Anyone done this and had to notch the frame for fitment? Seems like Only way to get it to fit on my truck?

@MitchJohnson0110

Жыл бұрын

shouldn't need to do that. The later model 7.3's came with a better gear reduction starter. It should fit right in

Same starter as a newer kubota diesel in the rtv they make. Just had to replace mine yesterday. Wish I woulda seen your video before cause the price I paid was way higher than what’s on your laptop. 🤦🏻‍♂️

When a boat mechanic builds a custom truck

@zacharymcfarlin1270

4 жыл бұрын

Zack Lennard personally I’ve never owned or worked on a boat

@zacklennard2925

4 жыл бұрын

Zachary McFarlin lol thats crazy

@millerbartlett3453

4 жыл бұрын

Zack Lennard obviously you’ve never seen his amazing work

I’ve got a mean green starter. It turns my engine over at idle speed. Lol

The thing is guy it's not just your starter he have done the proper battery cables negative and positive proper batteries the proper grounding of your vehicle all that goes with starting up of your vehicle and not just your starter

GOD DAMN, watch the oil pressure gauge when he is cranking it. The gauge was actually showing oil pressure, that motor is spinning with that starter!

I would say it’s 3/5 the price of the Denso.

So bottom line, "Size does matter"!😅😂

Hey bro get us links to all those parts. I’m super interested in upgrading my starting system now on my 7.3.

Will that starter fit my 96 obs 7.3 Powerstroke

@bigcountry7096

4 жыл бұрын

Im not sure but my brother has 3 7.3 trucks 85 to 90's and they all got the same starter

What part number Odyssey batteries are those. I'm going to need a pair before winter

@zacharymcfarlin1270

4 жыл бұрын

Odyssey 65-PC1750T

I love how you have no rust! Jealous 😆

I just wanna know what the hell is up with that dash and cluster😂😂